Owner’s manual Mode d’emploi Bedienungsnleitung Istruzioni per l’uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instalação DXZ948RMP HIGH END RDS-EON FM/MW/LW RADIO CD/MP3/WMA COMBINATION WITH TOUCH PANEL • RDS EON HAUT DE GAMME COMBINAISON FM/MW/LW RADIO CD/MP3/WMA AVEC ECRAN TACTILE • HOCHLEISTUNGS-UKW-/MW-/LW-AUTORADIOKOMBINATION MIT RDS-EON-FUNKTION UND CD-/MP3-/ WMA-SPIELER MIT TOUCH PANEL-BEDIENFELD • HIGH END RDS-EON FM/MW/LW RADIO CD/MP3/WMA COMBINAZIONE CON PANNELLO A TOCC
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this unit. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, DAB and TV tuner connected via the CeNET cable.
1. PRECAUTIONS .............................................................................................................................. 3 Sloping Console .............................................................................................................................. 4 Handling Compact Discs ................................................................................................................. 4 2. CONTROLS ........................................................................
Sloping Console English This unit uses a SLOPING CONSOLE to make large screen displays possible. When you use the SLOPING CONSOLE, be sure to close it. CAUTION BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE SLOPING CONSOLE. 1. For safety’s sake, always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching OFF the ignition key. If you switch OFF the ignition key with the SLOPING CONSOLE tilted, the SLOPING CONSOLE does not close. 2.
English 2.
English 3. NOMENCLATURE Names of the Buttons and their Functions [RELEASE] button [TA] button • Remove the DCP. • Use the button to set the TA (Traffic Announcement) standby mode (when the 2ZONE function is “OFF”). Switches the operation of the 2-ZONE function. Holding this button down for 1 second or longer switches the 2-ZONE type (when the 2ZONE function is “ON”). Photo Sensor • This sensor detects the brightness inside your car.
● When the CD/DVD changer is connected ●When the TV/DAB is connected ∗ For details, see the section “TV operations” (cf. page 54) or “Digital Radio / DAB operations” (cf. page 58). ∗ For details, see the section “CD changer operations” (cf. page 51). For the DVD changer, refer to the Owner’s Manual provided with the DVD changer. [ [TA] button • Use the button to set the TA (Traffic Announcement) standby mode to the DAB mode. (This function is available only for a DAB tuner.
Display Operations English A touch panel display is used as the display on this unit. You can operate this display just by touching it with your fingertip. There are four main display operations as follows: Touch Touch the display with your fingertip and take it away within 1 second. This is the most basic operation when operating the display.
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Attaching the DCP 1. Insert the DCP so that the A section on the right side of the DCP catches on the hook B on the unit. Removing the DCP 1. With the SLOPING CONSOLE closed, turn off the power. 2. Press the [RELEASE] button deeply to open the DCP. [RELEASE] button 2.
English 5. REMOTE CONTROL Receiver for remote control unit Operationg range : 30° in all directions Signal transmitter Remote control unit [FUNC] [ ],[ [2-ZONE] ] [ ],[ ] [BAND] [TA] [MUTE] [DISP] [PS/AS] [PTY] [AF] Inserting the Batteries AA (SUM-3, R-6/1.5V) Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Insert the AA (SUM-3, R-6/1.
Functions of Remote Control Unit Buttons Radio (RDS) / DAB CD changer DVD changer CD/MP3 Button TV [FUNC] Switches among radio, DAB, CD/MP3, AUX, CD changer, DVD changer and TV. [BAND] Switches reception band. Plays the first track. Top play. Moves the next disc in increasing order. Switches reception band. [ ],[ ] Increases and decreases volume (in all modes). [ ],[ ] Moves preset channels up and down. Moves tracks up and down.
English 6. OPERATIONS Basic Operations CAUTION Be sure to lower the volume before switching the unit off or the ignition key. The unit remembers its last volume setting. If you switch the power OFF with the volume up, when you switch the power back ON, the sudden loud volume may hurt your hearing and damage the unit. Turning ON/OFF the power Turning on CODEMATIC function When “CODEMATIC” is set to “ON”, and the power is turned ON with the DCP attached, the Touch Code display appears.
Basic Operations Switching the display There are 2 basic operation modes: standard operation and simple operation. 1. Touch the centre of the display. Each time you touch the display, it changes as follows: 1. In the main display screen, touch and hold the left of the display for 1 second or longer. The operation mode is switched. Title display PS NAME SIMPLE MODE MODE 98.10MHz 98.
Basic Operations English Wallpaper Spectrum analyzer display Touching and holding the center of the display for 1 second or longer switches to the wallpaper display. Touching and holding the right of the display for 1 second or longer during the spectrum analyzer (S/A) display switches the spectrum analyzer display. 1 9 S/A SCAN S/A 1, S/A 2, and S/A 3 are displayed for 10 seconds or longer each. S/A 1 0 2 S/A WMA 01 / 01 : 48 1 MODE FLDR No.
Basic Operations Touch English ■ To stop scrolling 3. Touch on the right of the display to select the ADF mode. on the title display. RTN The CT allows you to receive CT data sent from an RDS station and display the time. To display the CT screen, touch the centre of the display. • If CT data is not being received, “--:-- CT” appears in the display. Note: • CT data is not transmitted in some countries and by some broadcast stations. Also, in some areas, the CT data may not display accurately.
Basic Operations English 2. Touch A-MODE. OFF POSITION OFF OFF P. EQ Dolby PLII RTN SOUND MENU 2 - ZONE ADF A - MODE OFF OFF 3. Touch on the adjustment item display to select “SW VOLUME” or “CTR VOLUME”. AUDIO MODE 0 4. Touch on the right of the display adjust the item as desired. ∗ “BALANCE” can be adjusted within the range L13 (left side emphasized) and R13 (right side emphasized). ∗ “FADER” can be adjusted within the range R12 (rear side emphasized) and F12 (front side emphasized). 5.
AC-Processor III Operations Dolby Pro Logic II is a matrix decoding technology in which updated digital matrix technology is applied and Dolby Pro Logic is further improved. Dolby Pro Logic II realizes excellent 5.1 channel reproduction of Dolby surround source as well as stereo sound sources such as CDs, thereby causing a surround channel to be full-ranged (20 Hz to 20 kHz) and become stereo. Therefore, you can enjoy any stereo sources with dynamic sound of 5.1 channel.
AC-Processor III Operations English 3. Touch on the ON/OFF display. The position effect is toggled ON/OFF. POSITION MODE FRONT 2. Touch POSITION. RTN BU B/U When the position effect is set to “OFF”, the position setting is not reflected on the music source. This ends the position setting. Press the [SOUND] button to return to the original mode. 4. Touch B/U to select “BASIC”. POSITION MODE FRONT ON 3. Touch on the ON/OFF display. The position effect is toggled ON/OFF. BASIC 3 OFF 1.
AC-Processor III Operations 11. When you have finished adjusting each item, touch RTN. The display returns to the original screen, and “” is displayed at the BASIC or USER display. Operation so far completes position adjustment. To continue to store the adjustment values to the position user menu, perform the following. 12. Touch and hold RTN for 1 second or longer. The position menu list is displayed. 13. Touch and hold the user memory you want to store the adjustment values to for 2 seconds or longer.
AC-Processor III Operations English CAR LENGTH: Adjusts the deviation in sound pressure along the length of the car. 1. Press the [SOUND] button. 2. Touch VSE. on the ON/OFF display. 3. Touch The VSE effect is toggled ON/OFF. 4. Touch B/U to select “BASIC” or “USER”. 5. Touch on the right of the display to select the menu that is used as the menu for adjustment. 6. Press the [A] button. 7. Touch on the adjustment item display to select “DIFFUSE”, “CAR WIDTH” or “CAR LENGTH”. Selecting the P.EQ menu P.
AC-Processor III Operations Speaker Mounting No. Display name position 1 SEDAN-1 Front: Front door Rear: Rear parcel 2 SEDAN-2 Front: Front door Rear: Rear door 3 WAGON-1 Front: Front door Rear: Luggage (side) 4 WAGON-2 Front: Front door Rear: Rear door 5 MINI VAN-1 Front: Front door Rear: Luggage (side) 6 MINI VAN-2 Front: Front door Rear: Rear door 6. Press the [SOUND] button to return to the original mode. 9. Touch on the right of the display and adjust the item as desired.
AC-Processor III Operations English FREQUENCY (centre frequency selection) Selects the frequency to be used as the centre of the frequency band to be compensated from the range 20Hz to 20kHz. (1/3 octave steps, 31 points) GAIN (gain adjustment) Adjusts the gain (output level) within the range -12dB to +12dB. (1dB steps, 25 points) Q (Q curve selection) Sets one of 1, 3, 5, 7, or 20 as the sharpness of the Q curve.
Radio Operations ■ Main display This is displayed by pressing the [ROTARY] knob and selecting the radio mode. PS NAME MODE FM1 98.10MHz 4 MANU Manual indicator 3 2 B BAND Touching this switches the reception band. Touching and holding this for 1 second or longer switches between the manual tuning mode and the seek tuning mode. a d (only in the simple operation display) Touching these enables seek tuning or step tuning (in the manual tuning mode).
Radio Operations English Tuning Manual tuning There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning. There are 2 ways available: quick tuning and step tuning. In the step tuning mode, the frequency changes 1 step at a time. In the quick tuning mode, you can quickly tune the desired frequency. Seek tuning There are 2 types of seek tuning: DX SEEK and LOCAL SEEK.
Radio Operations Preset scan A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Preset scan is a function for receiving stations in the order that they are currently stored to preset No. so that broadcasts can be checked. 1. Touch BAND to switch the reception band. 1. Touch MODE. 2. Operate the frequency display to store the station to. 2. Touch P-SCAN. The MODE display changes to “P-SCAN” and the preset No.
RDS Operations English RDS (Radio Data System) AF function This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received (PS), and can automatically switch to the broadcast station with the best reception as you move over long distances (AF switching). If a traffic announcement or programme type is broadcasted from an RDS station, this broadcast is received no matter what mode you are in.
RDS Operations When the REG function is ON, the optimum regional station can be received. When this function is OFF, the optimum station for that region is received if the regional station area switches as you drive. • The factory default setting is “OFF”. Notes: • This function is disabled when a national station such as BBC R2 is being received. • The REG function ON/OFF setting is valid when the AF function is ON. ■ To switch the REG function ON/OFF 1. Touch MODE. 2. Touch REG.
RDS Operations English Auto store function for TP stations You can automatically store up to 6 TP stations to preset memory. If the number of TPs that can be received is less than 6, broadcast stations already stored in memory are left without being overwritten. 1. Make sure that “TA” is displayed, and touch MODE. If “TA” is not displayed, press the [TA] button to display “TA”. 2. Touch and hold A-STORE for 2 seconds or longer. The MODE display changes to “A-STORE” and the preset No.
RDS Operations DEUTSCH Nachrich Aktuell Service Sport Bildung Hör + Lit Kultur Wissen Unterh Pop Rock U-Musik L-Musik E-Musik - - Musik Wetter Wirtsch Kinder Soziales Religion Anruf Reise Freizeit Jazz Country Landes M Oldies Folklore Feature PTY item SVENSKA Nyheter Aktuellt Info Sport Utbildn Teater Kultur Vetenskp Underh Pop Rock Lättlyss L klass Klassisk Övrig m Väder Ekonomi För barn Socialt Andligt Telefon Resor Fritid Jazz Country Nation m Oldies Folkm Dokument 3. Touch RTN for 1 second or longer.
RDS Operations English Switching the PTY display language You can select one of 4 languages (English, German, Swedish or French) for the PTY displayed in the display. • The factory default setting is “ENGLISH”. 1. Press the [A] button to set the adjust mode. on the setting item display to 2. Touch select “LANGUAGE” under “TUNER”. ADJUST MODE LANGUAGE ENGLISH TUNER 3. Either touch on the right of the display, or turn the [ROTARY] knob to select the language.
CD / MP3 / WMA Operations ■ Main display This is displayed by pressing the [ROTARY] knob to select the CD mode. FOLDER 05 WMA 003 04 / 02 : 11 DRM indicator MODE FLDR No. TOP Folder display Title display Track/playing time display Touching the left of the display for 1 second or longer switches the operation mode. SIMPLE MODE MODE MP3 05 01 / 01 : 11 TOP Title display Track/playing time display Track/playing time display 01/02: 00: The track No.
CD / MP3 / WMA Operations English What is MP3? MP3 is an audio compression method and is classified as audio layer 3 of the MPEG standard. This audio compression method has gained ground into PC users and Become a standard format. This MP3 features original audio data compression to about 10 percent of its initial size while keeping high sound quality intact. This means that about 10 music CDs can be recorded on a CD-R disc or CD-RW disc to allow a long listening time without having to change CDs.
CD / MP3 / WMA Operations This function allows you to select either CD-DA or MP3/WMA files in the case of discs (e.g. CDEXTRA) containing a mixture of CD-DA (music CD) and MP3/WMA files. 1. Touch MODE. 2. Touch M-SESS. Each touch of M-SESS toggles the M-SESS display between “CD” (play CD-DA) or “MP3/WMA” (play MP3/WMA). * If M-SESS is not displayed, touch NEXT. 3. Touch RTN. The multi-session selection setting is reflected the next time you load a CD.
CD / MP3 / WMA Operations English Pausing play 1. Press the [ Perform the following to play the play list. 1. Touch MODE. ] button. 2. Touch NEXT. ■ To resume play 1. Press the [ ] button again. Selecting a track When a CD-R/CD-RW recorded with an MP3 file or a WMA file is loaded, you can select only tracks recorded to the same folder by touching on the track display. 1. To listen to the next track, touch track display. on the 2. To listen to the previous track, touch twice on the track display.
CD / MP3 / WMA Operations Folder repeat play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc. This function allows you to repeatedly play the folder currently being played. This function is available only when a CD-R/CD-RW recorded with MP3 files or WMA files is loaded. 1. Touch MODE. 2. Touch -SCAN. The MODE display changes to “ -SCAN” and scan play starts. ∗ Scan play starts from the next track after the track currently being played.
English Different Pieces of Music Heard by Plural Listeners (2-ZONE function) The 2-ZONE function outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating 2 sources in the 1 centre unit, thereby allowing 2 or more listeners to enjoy separate music sources. This unit can control its internal sources (radio, CD, MP3, etc.) to play them back, and further, can simultaneously play back sources from external equipment connected via CeNET (for instance, CD changers etc.).
■ To switch the 2-ZONE function ON/ OFF 1. Press and hold the [SOUND] button on the unit for 1 second or longer. ■ To switch the 2-ZONE type Press and hold the [TA] button on the unit for 1 second or longer while the 2-ZONE function is in use. Operations Common to Each Mode Screen display in the title entry mode ■ Main display This is displayed when the title entry mode is selected. (cf.
Operations Common to Each Mode English Type of text The text that is displayed changes according to the text type display. When text type display is “A”: A E I M Q U X (space) When text type display is “a”: a e i m q u When text type is “0-9”, “!?” or “Å”: All characters are displayed. RTN Touching this returns the display to the main display. NEXT Touching this displays the next text list. Entering titles You can give TV stations a title up to 10 characters long, and to CDs.
Operations Common to Each Mode English Clearing titles The mode changes to the adjust mode. 1. Either receive the TV station, or play a CD whose title you want to clear. 2. Touch the centre of the display to set to the user title display. When the display changes to the user title display, “USER” is displayed above the preset No. display. 3. Press and hold the [A] button for 1 second or longer. The mode changes to the title entry mode. 4. Touch and hold the title display for 2 seconds or longer.
Operations Common to Each Mode English Main Item SOUND PL II DELAY PL II CONT TUNER SETTING 40 DXZ948RMP Sub-item AC-PRO III • Selecting the VSE mode (STD/PRO) (cf. page 44) EQ SELECT • Selecting the equalizer mode (cf. page 44) SP-SETTING • Setting the speaker configuration (cf. page 44) CENTER-SP / SUB-WOOFER • Setting sub-woofer speaker ON/OFF (cf. page 45) HPF / SUB-W LPF • Adjusting the speaker filter frequency (cf. page 45) AMP CANCEL • Setting internal amplifier use ON/OFF (cf.
Operations Common to Each Mode This function allows you display a screen saver when you have not operated this unit for about 30 seconds. • The factory default setting is “ON”. English Setting the screen saver (SCREEN SVR) Spectrum analyzer pattern 2 Spectrum analyzer pattern 3 1. Press the [A] button to set to the adjust mode. on the setting item display to 2. Touch select “SCREEN SVR” under “DISPLAY”. Spectrum analyzer pattern 4 ADJUST MODE SCREEN SVR ON DISPLAY 3.
Operations Common to Each Mode English 4. Touch on the centre of the display to determine the entry position. ∗ To clear the message, touch and hold the centre of the display for 2 seconds or longer. If you perform the operation at step 8 with the message cleared, the message returns to its factory default setting. 5. Touch on the left of the display to select the type of text. Each touch of switches the type of text. For details, see page 37. 6.
Operations Common to Each Mode Setting the auto-dimmer (DIMMER IN) This function allows you to dim the lighting of the display matched to the illumination or the brightness inside your car. Select either “AUTO” (interlocked to the brightness inside your car) or “ILLUMI” (interlocked to the illumination inside your car) as the auto-dimmer setting. • When the auto-dimmer function is set to “AUTO”, the brightness of the display is dimmed according to the brightness detected by this sensor.
Operations Common to Each Mode English 3. Either touch on the right of the display, or turn the [ROTARY] knob to select “ON” or “OFF”. 4. Press the [A] button to return to the original mode. Setting the beep for when buttons are operated (BEEP) The short or long high-pitched tone you hear when a button is operated is called a “BEEP”. • The factory default setting is “ON”. 1. Press the [A] button to set to the adjust mode. 2. Touch on the setting item display to select “BEEP” under “APPERNCE”.
Operations Common to Each Mode CTR+SW 5.1ch configuration SW L +SW R 4ch+sub-woofer configuration Front/rear speakers (4ch) Centre speaker (1ch) Sub-woofer (1ch) Front/rear speakers (4ch) Sub-woofer (2ch) Notes: • Sound is not output from the centre speaker unless the following settings are made when “CTR+SW” is set. (1) Referring to “Selecting the PLII menu (Dolby PL II)” (cf. page 17), set the Dolby Pro Logic II mode to “MUSIC” or “MATRIX”.
Operations Common to Each Mode English 2. Touch on the setting item display to select “HPF” under “SOUND” and “SUB-W LPF” under “SOUND”. 1. Press the [A] button to set to the adjust mode. on the setting item display to 2. Touch select “SP GAIN” under “SOUND”. ADJUST MODE HPF THROUGH ADJUST MODE SOUND SP GAIN EDIT SOUND 3. Either touch on the right of the display, or turn the [ROTARY] knob to set the frequency. * Select one of THROUGH, 50Hz, 80Hz, and 120Hz. 4.
Operations Common to Each Mode 1. Press the [A] button to set to the adjust mode. 2. Touch on the setting item display to select “SRD-SP” under “PL II DELAY”. ADJUST MODE SRD - SP 0ms PLII DELAY 3. Either touch on the right of the display, or turn the [ROTARY] knob to adjust the delay time. ∗ “SRD-SP” can be adjusted within the range 0 ms to 15 ms. 4. Press the [A] button to return to the original mode.
Operations Common to Each Mode English 2. Touch on the setting item display to select “AUX/TEL” under “SETTING”. ADJUST MODE AUX / TEL AUX SETTING 3. Either touch on the right of the display, or turn the [ROTARY] knob to select “AUX” or “TEL”. AUX: The AUX/TEL input cable is for external Audio input. TEL: The AUX/TEL input cable is for cellular phone audio input. 4. Press the [A] button to return to the previous mode.
Operations Common to Each Mode 4. Press the [A] button to return to the previous mode. 5. Next, adjust the sensitivity. Touch on the setting item display to select “A-VOL SENS” under “SETTING”. ADJUST MODE A-VOL SENS LOW SETTING 6. Either touch on the right of the display, or turn the [ROTARY] knob to select the sensitivity.
Operations Common to Each Mode English Using the security function (CODEMATIC) This function prevents persons who do not know the touch sequence from easily operating this unit. The Touch Code display appears when DCP is attached and the power is turned ON with “CODEMATIC” set to “ON”. If you touch the display in this screen in the preset order, “SUCCESSFUL” is displayed and the power is turned OFF.
English 7. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer When an optional CD changer is connected through the CeNET cable, this unit can control CD changer operations. This unit can be connected to a total of 2 CeNET-wired CD changers. When an optional DVD changer is connected through the CeNET cable, this unit can control DVD changer operations. To view a DVD, an optional monitor is required.
CD Changer Operations English ■ Disc list display (CD changer mode) This is displayed by touching and holding MODE for 1 second or longer in the main display. Disc name 001 NO TITLE 002 003 JAZZ NO TITLE PREV -RTN TITLE LIST TITLE** 004 TITLE** 005 TITLE** 006 NEXT Disc No. : Selection in progress Touching a disc name returns the screen to the main display, and play starts from the first track in the disc you touched. ➔ PREV-RTN: Touching this displays the previous title list.
CD Changer Operations ■ To cancel disc scan play The top function starts play from the first track on the disc currently being played. 1. Touch D-SCAN. The D-SCAN display changes to “MODE”, and the track that was playing when you touched D-SCAN is played. 1. Touch and hold MODE for 1 second or longer. The disc list is displayed. If you touch NEXT, the next part of the disc list is displayed. 2. Touch the disc name.
English CD Changer Operations TV Operations Random play TV tuner function Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is canceled. When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV, you need a TV tuner and a monitor. 1. Touch MODE. 2. Touch T-RANDOM. The MODE display changes to “T-RDM” and random play starts. ■ To cancel random play 1.
TV Operations a d (only in the simple operation display) Touching these buttons enables seek tuning or step tuning (in the manual tuning mode). Touch and holding these buttons enables quick tuning (in manual tuning mode). ■ Preset memory list display 001 002 5ch RTN TITLE LIST 32ch 004 80ch 005 TV1 ➜ TV2 ➜ TV1... Seek tuning Seek tuning is a function for automatically tuning stations with good reception. 1. Touch and hold BAND for 1 second or longer while MANU is displayed.
TV Operations English Recalling a preset station Auto store Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory. Auto store selects 6 TV stations automatically and stores each one into preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. 1.
TV Operations The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal. 1. Press the [ ] button. VTR is displayed, and the mode is switched to the VTR mode. ∗ The TV screen enters the video input mode, and videos can be viewed. ■ To return to the TV mode 1.
Digital Radio / DAB Operations English DAB control function Switching programmes When a CeNET cable is used to connect a DAB (Optional, DAH913 or DAH923), all functions can be operated. 1. Press the [ROTARY] knob to select the DAB mode. Listening to the DAB station 1. Press the [ROTARY] knob to change the operation mode. Notes: • The display shown in the normal reception mode and the preset reception mode is the same as that when a DAB station is received.
Digital Radio / DAB Operations 1. Press the [ROTARY] knob to select the DAB mode. 2. Touch BAND. Each touch of BAND changes the display in the following order: MEMO1 ➜ MEMO2 ➜ MEMO3 ➜ MEMO1... 3. Touch on the right of the display to recall a preset programme. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception.
Digital Radio / DAB Operations English 1. Touch MODE. 2. Touch INFO SEL to enter the “INFO SEL” mode. 3. Either touch on the centre of the display, or turn the [ROTARY] knob to select an information item. You can select any of 6 items: Travel ➜ Warning ➜ News ➜ Weather ➜ Event ➜ Special ➜ Travel... 4. Touch on the right of the display to select “ON” or “OFF”. 5. Touch RTN. PTY This function enables you to listen to the selected programme type regardless of the function mode.
5.1ch Surround Decoder Operations 3. Touch on the right of the display to select the Dolby Pro Logic II mode. Selecting PL II (Dolby PL II) 4. Touch RTN. Select one of the available four modes matched to the source you are to play as the Dolby Pro Logic II mode. • The factory default setting is “OFF”. Selecting the DSF menu ■ MUSIC (Music mode) See “Selecting the PLII menu (Dolby PLII)” (cf. page 17). ■ MATRIX (Matrix mode) See “Selecting the PLII menu (Dolby PLII)” (cf. page 17).
5.1ch Surround Decoder Operations English 4. Touch on the DSF menu No. to select the desired DSF menu. DSF MODE CHURCH RTN BASIC on the P.EQ menu No. to select 4. Touch the P.EQ menu. 1 ON DSF menus HALL ➜ CHURCH ➜ STADIUM ➜ LIVE ➜ JAZZCLUB ➜ THEATER ➜ HALL... No.
5.1ch Surround Decoder Operations When a 5.1ch surround decoder is connected, settings relating to music in the adjust mode are changed. Selecting setting items The following describes the items whose settings are changed. For details of other items that are not changed, see “Changing settings” (cf. Page 39) at “Operations Common to Each Mode”. 1. Press the [A] button. The mode changes to the adjust mode. ADJUST MODE CENTER - SP SOUND ON 2. Touch on the setting item display to select the item to set.
5.1ch Surround Decoder Operations English Setting speakers ON/OFF (CENTER-SP/SRD-SP/SUBWOOFER) Set the centre speaker (CENTER-SP), surround speaker (SRD-SP) and sub-woofer (SUBWOOFER) ON/OFF. Be sure to set this setting to “OFF” when there is no centre speaker, surround speaker or subwoofer. • The factory default setting is “ON”. 1. Press the [A] button to set to the adjust mode. 2.
5.1ch Surround Decoder Operations The timing when the sound of each speaker reaches the listening position depends on your speaker installation and the size of your car. Adjust the delay time of each speaker so that the sound of all speakers reaches the listening position at the same time as the sound from the front speakers. • The factory default setting is “0 ms”. 3. Touch on the right of the display to adjust the dynamic range and adjust the desired item.
Problem Cause Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead.
CD/MP3/WMA Cause English Problem Measure Sound is bad directly after power is turned on. Water droplets may form on the internal lens when the car is parked in a humid place. Let dry for about 1 hour with the power on. Wrong filename File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. Play list play is not performed. File name or extension is not correct. Use alphanumeric/ASCII characters for MP3/WMA file name. Use “.M3U” for the file extension of a play list.
If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Cause Measure ERROR 2 A DISC is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A DISC cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. ERROR 6 A DISC is loaded upside-down inside the CD deck and does not play. Eject the disc then reload it properly.
Radio section General Tuning System: PLL synthesizer tuner Receiving Frequencies: FM : 87.5 to 108 MHz (0.05 MHz steps) MW : 531 to 1602 kHz (9 kHz steps) LW : 153 to 279 kHz (3 kHz steps) Output Power: 4 × 31 W (DIN 45324, +B=14.4V) Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative ground Power Consumption: Less than 15 A Speaker Impedance: 4 Ω (4 to 8 Ω allowable) Auto Antenna Rated Current: 500 mA or less Weight: Main unit: 1.
