Operation Manual

16
English
Marker
Marker OFF
Camera type １１８°
Marker type Type１
Up/down ０
L/R ０
Marker
Marker OFF
Camera type １１８°
Marker type Type１
Up/down ０
L/R ０
Marker
OFF
ON
Marker ON
Camera type １１８°
Marker type Type１
Up/down ０
L/R ０
Marker
Marker ON
Camera type １１８°
Marker type Type１
Up/down ０
L/R ０
Marker
１１８°
１３０°
１６０°
1) Marker
- The onscreen distance markers should be considered as a general reference to assist the driver
in assessing the distances depicted on the screen. The distance markers have been designed
based on the back camera installation conditions listed in the next section, but differences in
vehicle design and construction may result in the actual installation condition or location be-
ing different from the conditions listed. In such cases, the display location should be set at the
closest marker No.
- Distance markers cannot be set if non Clarion cameras are used.
- The markers may not indicate the exact position of the bumper, the vehicles width or the distance to
the rear. Use as a reference only.
Caution
Warning
① Select Marker in the Marker menu and press the ENT(VOL) button(OK or ▶ button on the remote
control).
② Select ON, OFF with the ▲／▼ buttons and press the ENT(VOL) button(OK or ▶ button on the remote
control).
※ Only when the distance marker is ON, the camera type and marker setting can be selected.
2) Camera type
① Select Camera type in the Marker menu and press the ENT(VOL) button(OK or ▶ button on the remote
control).
② Select 118°, 130°, 160° with the ▲／▼ buttons and press the ENT(VOL) button(OK or ▶ button on
the remote control).
※ If the camera angle of view is not in Camera type, select an object near the field of view to adjust it.