Operation Manual

21
English
▲
▼
Camera4
▲
▼
Camera4
▲
▼
Camera4
▲
▼
Camera4
Camera2
Camera1 Camera4
Camera3
▲
▼
Camera2
▲
▼
AV2
▲
▼
AV2
▲
▼
Camera1
Camera linkage
Camera linkage
Link1 Camera1
Link2 Camera2
Link3 Camera3
Link4 Camera4
Link2+3
3 Screen
Camera1
2 Screen
3 Screen
4 Screen
Camera linkage
Link1 Camera1
Link2 Camera2
Link3 Camera3
Link4 Camera4
Link2+3
3 Screen
2) When a signal is input to the TRIGGER 1 - 4 terminal, the camera image corresponding to this (screen
set in Camera linkage) is displayed. When the signal is terminated, the display returns to the previous
screen (4 seconds later for Link 2 and 3).
※ The image can be switched even with the TRIGGER(Link) 1 - 4 signal image displayed but the display will
return to the previous screen upon the signal being terminated.
Former screen
Former screen
Former screen
TRIGGER 2 signal: Off
※AV2 screen 4 seconds later
TRIGGER 1 signal: Off
TRIGGER 1 signal: Off
TRIGGER 1 signal: Input
TRIGGER 1 signal: Input
TRIGGER 2 signal: Input
1) The camera image to be displayed can be set in the Link (TRIGGER terminal) 1 - 4.
① Select Link 1 - 4 or Link 2+3 with the ▲／▼ buttons in the Camera linkage menu, and press the
ENT(VOL) button (OK or ▶ button on the remote control).
② Select the screen when linked with the ▲／▼ buttons, and press the ENT(VOL) button (OK or ▶ button
on the remote control).
※ The 2 - 4 split screen display will be the screen set in the Split type display settings.
① Default condition when shipped
② When Link 1 is set to 4 screen display in the Camera linkage settings