Owner`s manual

After connecting your iPod to the EA 1251, the
iPod display will change to the following:
iPod ~
Clarion
OK to disconnect
Disconnecting
iPod automatically switches "on" after connecting
to EA1251, and it's power is charged as long as
it stays connected with the vehicle ignition key
turn to ACC or ON.
To switch off iPod manually, disconnect from
EA1251 adaptor.
Playback
iPod buttons are disabled and the display is lock
after it is connected to EA1251. All operations of
the iPod are controlled from the main unit. Some
iPod operations and features will be unavailable.
Please read this manual carefully to optimize your
iPod operations.
To understand playback features better, please
refer to PLAYLIST section.
Default playback setting
By default, the playback setting will be:
• Start to play from DISC1 (All Songs Play)
• Shuffle (Random) Off
• DISC Repeat On
When the iPod is connected, the main unit will
initially display "DISC" and "RPT".
6
To start iPod operations, change the main unit
mode to CD Changer mode. Playback will start
automatically.
The display changes from:
Disc Check -7 Disc Repeat -7 Start Playing
If the iPod is not connected, the main unit will
display "No Magazine".
The main unit is unable to detect the presence of
iPod if the battery of the iPod is flat.
Please refer to the Playback section for detailed
operation information.
If vehicle ignition is turned to ACC off, playback
is changed to pause, and iPod will go to power off
mode in a few minutes.
Songs number display
During playback, the main unit will display the
song number in sequence. However, only a
maximum of two digits are displayed. If there are
more than 99 songs in your iPod, only the last
two digits will be displayed. For example, songs
number 102 and-1002 will both be displayed as
"02".
Play/Pause
Press Play/Pause button on the main unit to play/
pause iPod playback.