Owner`s manual

Some main unit models with CD-Text function
have the capability to show CD-Text. When iPod
is connected to these models, the following text
will be displayed:
• Artist Name as Artist Title (64 byte)
• Song Name as Track Title (255 byte)
• Album Name as Disc Title (64 byte)
Long press Title button to change text as follows:
User Title
-7 Disc Title -7 Artist -7 Track Title ...
•
If there are more than 2 bytes of UTF8 data,
EA
1251 will change these to space character.
• If every title data
is non ASCII, the display will
show "NO TITLE".
• Disc Title will display as Album Title.
Note:
Some of main unit may not display title properly. In
this case, please press "DISPLAY" key and refresh
TITLE display again.
iPod 3rd Generation (Software Version 2.2 or higher).
iPod 4th Generation (Software Version
3.01 or higher).
iPod mini (Software Version 1.2 or higher).
iPod photo (does not apply to picture display).
When EA1251 receives this command, main unit will show as "NO TITLE".
If the main unit source button
is continuously
pressed, the main unit
will change from iPod mode
to other mode (depends
on connections and system
installed).
iPod playback is temporarily paused.
iPod setting and play position
is kept as long as
iPod
is still connected during this period.
ER2
ER3
Main unit does not receive
any response from iPod.
Communication error.
Disconnect iPod, reset and reconnect
(refer to iPod document).
Reduce playlist number or check connection.
Change mode of main unit to others and change
back
to iPod or disconnect/reconnect iPod.
9