Operation Manual

13
English
FZ102E
Setting Regional (REG)
1. Select “REG”.
2. Turn the [
] rotary knob to select “ON”
or “OFF”.
Notes:
When the REG function is ON, the optimum re-
gional station can be received. When this function
is OFF, if the regional station area switches as you
drive, a regional station for that region is received.
The factory default setting is “OFF”.
This function is disabled when a national station
such as BBC R2 is being received.
The REG function ON/OFF setting is valid when
the AF function is ON.
Cancelling a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt
broadcast.
Setting Programme Type (PTY)
1. Select “PTY”.
2. Turn the [
] rotary knob to select “ON”
or “OFF”.
Notes:
This function enables you to listen to a broadcast
of the selected programme type even if the unit is
on a function mode other than radio.
Some countries do not yet have PTY broadcast.
In the TA standby mode, a TP station has priority
over a PTY broadcast station.
The factory default setting is “OFF”.
PTY ITEM Contents
News News
Aairs Today’s events
Info Information
Sport Sports
Educate Education
Drama Drama
Culture Culture
Science Science
Varied Variety
Pop M Pop music
Rock M Rock music
Easy M Easy music
Light M Light music
Classics Classics
Other M Other music
Weather Weather
Finance Finance
Children For children
Social Social
Religion Religion
Phone In Phone in
Travel Trave l
Leisure Leisure
Jazz Jazz
Country Country
Nation M Nation music
Oldies Oldies
Folk M Folk music
Document Documentaries
Adjustment Mode
Selecting Program Type
1. Select “PTY SEL”.
2. Press the [
] button.
3. Turn the [
] rotary knob to select the
desired PTY.
* The PTY selection mode is cancelled automati-
cally 7 seconds after a PTY is selected.
PTY SEEK
During PTY item display, press the [ ]
/
[ ]
button to search for a PTY broadcast.
Note:
If no station with the selected PTY broadcast can
be received, the unit returns to the previous receiv-
ing station.
Setting clock type
1. Select “CLOCK”.
2. Turn the [
] rotary knob to select “RDS”
or “USER”.
Notes:
Set to display RDS or User adjustable clock.
The factory default setting is “USER”.
Setting clock format
1. Select "12/24 HR".
2. Turn the
[
]
rotary knob to select "12HR"
or "24HR"
Notes:
Set user clock format.
The factory default setting is “12HR”.
This setting is only available when User Clock is
selected.
Adjusting the clock
1. Select “CLK ADJ”.
2. Press the [
] button.
3. Press [
]
/
[ ] button to select the hour or
the minute.
4. Turn the [
] rotary knob to adjust the
time.
5. Press the [
] button to memory the new
setting value.
Notes:
This adjustment allows the user clock to be set by
user.
The factory default setting is “1:00”.
This setting is only available when User Clock is
selected.
Setting the method for title scroll
1. Select “SCROLL”.
2. Turn the [
] rotary knob to select “ON”
or “OFF”.
Notes:
Set the MP3/WMA title to scroll continuously or once.
The factory default setting is “ON”
Restoring to factory default setting
1. Select “RESET”.
2. Press the [
] button.
A conrmation message will be displayed.
3. Turn the [
] rotary knob to select “YES”.
4. Press the [
] button again to reset.
Notes:
All settings and preset memory channels will be
returned to initial stage. User will have to manually
perform those settings again.
Once reset, system will automatically turn o.
FZ102E_Owner_manual.indb 13 7/24/2012 9:55:21 AM