Owner`s manual

HD Radio Op..:..er......;;lJ.....;,t.....;;io_n.....;,s _
About HD Radio™ Technology
HD Radio Technology allows CD-quality
digital broadcasting of your local AM and
FM radio stations. HD Radio broadcasts
can include multiple channels on the same
frequency, which is called multicasting. With
multicasting, you can receive up to eight
additional multicast channels: HD1-HD8.
With an HD Radio tuner connected, you
will receive HD Radio digital broadcasts
automatically when tuned to a station that
offers HD Radio Technology.
NOTE: Not all FM or AM stations offer
HD Radio (digital) broadcasting. You can
receive both analog and digital stations
with the unit.
Accessing radio mode
Press the [CONTROL] knob or [SRC I (!)] button
on
the remote control to switch to the HD
RADIO source, and HD icon will illuminate.
Select a band
Press and hold the [CONTROL] knob (up long
press) on the panel or [BANDITOP] button on
the remote control to change between three
FM and one AM bands. Each band stores up
to six preset stations.
Tuning
- Seek Tuning
Press and hold the [CONTROL] knob (left /
right) on the panel
or [..... , ~ ] buttons on
the remote control to seek the next/previous
station automatically.
- Manual
Tuning
Press the [CONTROL] knob (left / right) on
the panel or [..... ,
~ ] buttons on the remote
control to move the radio frequency number
up or down one step.
13
FZ501
HD Radio multicast channels
To tune to an HD Radio multicast channel,
tune to the main signal and then press the
[CONTROL] knob on the panel. PTY and
SUB CH are displayed. Select PTY or SUB
CH by rotate [CONTROL] knob and push to
confirm.
• Select PTY type from the category list by
rotate [CONTROL] knob and push.
•
Select SUB CH by rotate [CONTROL]
knob and push.
• Multi channel is available when a digital
signal is detected, the DIGITAL icon will
illuminate. If the digital signal becomes
unavailable, the unit will revert to Analog
reception.
Preset stations
Up to six stations on each band can be
stored as presets, which can then be instantly
recalled
by pressing the associated preset
button. To store a station, turn the radio on
and select the desired band and station.
Press and hold the desired preset button
(numbered one through six on the remote
control).
When stored, the preset number
will appear in the display. The station is now
stored and can be recalled by pressing the
corresponding preset button. Repeat for the
remaining five presets on the current band
and for presets on the other four bands.
NOTE: Multicast stations can be stored as
presets, but the unit must be in Digital or
Auto reception mode to receive them.
Preset scan
Press [SCN/PS/AS] button on the remote
control to scan and play all preset stations for
10 seconds each. Press [SCN/PS/AS] button
on the remote control again to stop scanning
and play the current station.
Note:
Be careful not to press and hold the [SCNI
PS/AS] button on the remote control,
otherwise the auto store function is engaged
and the unit starts storing stations.