Owner`s manual

Note:
You can stop the auto store function at any
time
by pressing the [SCN/PS/AS] button on
the remote control again.
HD Radio Op_e_ra_t_io_n_s _
Automatic store (AS)
Press the [SCN/PS/AS] button on the remote
control to select six strong stations and store
them
in the FM3 or AM band using the auto
store function. After entering the stations into
memory, the unit will automatically stop at
each station for five seconds, allowing you to
preview each selection. When using the auto
store function, the new stations replace any
stations already stored
in preset memory.
iTunes@ Tagging
The unit offers iTunes® Tagging, which
allows the user to "Tag" songs playing on
HD
Radio ™ stations for purchase later
through iTunes. When press [ISR] button on
the remote contorl, the unit stores the title
and artist song information that can then
be
transferred to your iPod when connected to
the unit. A list titled "Tagged" will appear
in
iTunes, allowing you the option to purchase
your tagged songs.
Note:
"iTunes@ Tagging" function works by
connecting THD301 (sold separately).
iPod compatibility
For detailed information on the playable iPod
models, see our home page: www.clarion.
com
Note:
• iPhones can also be connected to this
system and "iPod" appearing in this
manual should be referred to as "iPod/
iPhone".
• This system
will not operate or may operate
improperly with unsupported versions.
Tagging music
To begin tagging music, tune to an HD Radio
station. The DIGITAL icon at the display must
be illuminated, indicating a digital station
is being received. TAG icon lights up when
Tagging function is ready. Press the [ISR]
button
on the remote control. The tagging
function
is highly depends on the receptions
of the radio station.
If the channel reception
is insufficient, it will effect the operation of the
tagging function.
"Stored Tag ## of 64" will appear in the
display. The song information
is saved to the
unit memory until your iPod is connected.
You can tag up to 64 songs before the tags
must
be transferred to your iPod or deleted.
When the Tag
memory reaches capacity
(64 tags) the bottom of the screen displays
"Memory Full".
Table 5: TAG Messages
Tag Message
Reason
STORED TAG ##
If the Tag data is ready, and
OF64
[ISR] button on the remote
control is pressed
SENDING
TAG ##
Tag data is sending to iPod
MEMORY FULL Tag storage
is full
TAG DATA IS NOT
Tag data
is not available
AVAILABLE
IPOD FULL
iPod memory
is full
TAG NOT SUPPORT
When
connect and press
[ISR] button on the remote
control, the iPod without
Tagging function
Note:
Tags saved to your iPod can be managed
using the iTunes software, available at www.
apple.com/itunes.
FZ501 14