Owner`s manual

iPod & iPhone Operations
Connect
Connect your iPod or iPhone to the USB slot
via CCA-748 cable.
When connecting a device, the unit will read
the files automatically. The track information
display
on the screen once playback start.
MENU
In the S-CTRL OFF mode, press the
[CONTROL] knob (up), rotate the knob select
"MUSIC"
or "VIDEO".
Select "MUSIC", press the [CONTROL] knob,
then rotate the
[CONTROL] knob to show
PLAY LISTS I ARTISTS I ALBUMS I GENRES
I SONGS I COMPOSERS, then press the
[CONTROL] knob to confirm.
Select "VIDEO", press the [CONTROL] knob,
then rotate the
[CONTROL] knob to show
MOVIES I MUSIC VIDEO I TV SHOWS I
VIDEO PODCASTS I RENTALS, then press
the [CONTROL] knob
to confirm.
NOTE:
• In case of VIDEO Playback, CCA-748 cable
and monitor (sold separately) are required.
• VIDEO MENU item
is different by the model
of connected iPod and language setting.
Repeat play
This function allows you to play the current
track repeatedly or play all tracks
in your iPodl
iPhone repeatedly.
1. Press the [RPT] button on the remote
control once or more until "RPT ON"
appears on the LCD to perform repeat play.
2. Press [RPT] button on the remote control
repeatedly until "RPT OFF" appears
on the
LCD
to cancel repeat playback.
Random play
This function allows you to play all tracks in a
random order.
1. Press the [ROM] button on the remote
control once or more until "ROM ALBUM"
appears
on the LCD for album random play.
2. Press the [ROM] button on the remote
control once or more until "ROM SONG"
appears on the LCD to perform random
play.
3. Press the [ROM] button on the remote
control once or more until "ROM OFF"
appears on the LCD to cancel random
playback.
Setting iPod simple control mode
Use this function if you wish to operate
through your iPod connected to this unit via
the USB cable.
* The factory default setting is" OFF ".
1. Press and hold [CONTROL] knob (center),
and rotate the [CONTROL] knob choose
ADJUST, then press the [CONTROL] knob
(center)
to enter system setup.
2 Press the [CONTROL] knob (left I right) to
select" S-CTRL".
3. Rotate the [CONTROL] knob to select"
ON " or " OFF" .
• ON: Operations are made through your
iPod.
• OFF: Operations cannot be made
through your iPod.
Notes:
• When performing iPod operations using
simple control mode, make the operations
slowly. If repetitive operations are
performed too quickly, unforeseen errors
may occur.
• When performing iPod operations using
simple control mode, please do not
operate the iPod and the unit at the same
time, otherwise there may be unexpected
event happened.
FZ501 18