Owner`s manual

Disassemble trim ring
1. Push the trim ring to right and pUll out the
right part.
2. Push the trim ring to left and pull out the
left part.
Disassemble the unit
1. Switch off the power.
2. Remove the trim ring.
3. Insert the removal
keys straight back until
they lock,then pull
the unit out.
4. Disconnect all the wires.
6) Removing the Source Unit
Dashboard
Mounting Frame
M5x6
Method B
1. Insert this unit directly to the opening of
the dashboard.
2. Place
M5x6 cylindrical screw through the
holes of the mounting frame located inside
the opening to holes
of the unit and fasten
the screws to left & right.
Trim ring installation
Attach the trim ring around the front panel.
FZ501 28