Owner`s manual

30
English
• Connecting to the external amplier
External ampliers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
8) Connecting the accessories
16-Pin Connector Extension Lead
(attached to the source unit)
Yellow wire (Memory back-up lead)
Red wire (Power lead)
Blue/White wire (Amplier turn-on lead)
Black wire (Ground lead)
Orange/White wire (Illumination lead)
Blue wire (Auto antenna lead)
Connect to remote turn-on lead of amplier
Connect to vehicle chassis ground
Connect it to the car power supply terminal
for illumination
Connect it to the car power supply terminal
for antenna
Connect directly to battery
Accessory
12V
Not used.
Insulate each wire
Front Right
Gray
White
Purple
Green
Gray/Black
White/Black
Purple/Black
Green/Black
Front Left
1
5
A
Front Right
Gray
White
Purple
Green
Gray/Black
White/Black
Purple/Black
Green/Black
4-Speaker system
2-Speaker system
or
Rear Right
Rear Left
Front Left