User's Manual
English
7
FZ502
HD Radio Operations
About HD Radio™ Technology
HD Radio Technology allows CD-quality
digital broadcasting of your local AM and
FM radio stations. HD Radio broadcasts
can include multiple channels on the same
frequency, which is called multicasting. With
multicasting, you can receive up to eight
additional multicast channels: HD1~HD8.
With an HD Radio tuner connected, you
will receive HD Radio digital broadcasts
automatically when tuned to a station that
offers HD Radio Technology.
NOTE: Not all FM or AM stations offer
HD Radio (digital) broadcasting. You can
receive both analog and digital stations
with the unit.
Accessing radio mode
Press the [CONTROL] knob or [SRC / ]
button
on the remote control to switch to the HD
RADIO source, and HD icon will illuminate.
Select a band
Press and hold the [CONTROL] knob (up long
press) on the panel or [BAND/TOP] button on
the remote control to change between three
FM and one AM bands. Each band stores up
to six preset stations.
Tuning
- Seek Tuning
Press and hold the [CONTROL] knob (left /
right) on the panel or [
, ] buttons on
the remote control to seek the next/previous
station automatically.
- Manual Tuning
Press the [CONTROL] knob (left / right) on
the panel or [
, ] buttons on the remote
control to move the radio frequency number
up or down one step.
HD Radio multicast channels
To tune to an HD Radio multicast channel,
tune to the main signal and then press the
[CONTROL] knob on the panel. PTY and SUB
CH are displayed. Select PTY or SUB CH by
rotate [CONTROL] knob and push to conrm.
• Select PTY type from the category list by
rotate [CONTROL] knob and push.
• Select SUB CH by rotate [CONTROL] knob
and push.
• Multi channel is available when a digital
signal is detected, the DIGITAL icon will
illuminate. If the digital signal becomes
unavailable, the unit will revert to Analog
reception.
Preset stations
Up to six stations on each band can be
stored as presets, which can then be instantly
recalled by pressing the associated preset
button. To store a station, turn the radio on
and select the desired band and station.
Press and hold the desired preset button
(numbered one through six on the remote
control). When stored, the preset number
will appear in the display. The station is now
stored and can be recalled by pressing the
corresponding preset button. Repeat for the
remaining five presets on the current band
and for presets on the other four bands.
NOTE: Multicast stations can be stored as
presets, but the unit must be in Digital or
Auto reception mode to receive them.
Preset scan
Press [SCN/PS/AS] button on the remote
control to scan and play all preset stations for
10 seconds each. Press [SCN/PS/AS] button
on the remote control again to stop scanning
and play the current station.
Note:
Be careful not to press and hold the [SCN/
PS / AS] butt on on the remo t e co ntro l,
otherwise the auto store function is engaged
and the unit starts storing stations.
Automatic store (AS)
Press the [SCN/PS/AS] button on the remote
control to select six strong stations and store
them in the FM3 or AM band using the auto
store function. After entering the stations into
memory, the unit will automatically stop at
each station for ve seconds, allowing you to
preview each selection. When using the auto
store function, the new stations replace any
stations already stored in preset memory.
Note:
You can stop the auto store function at any
time by pressing the [SCN/PS/AS] button on
the remote control again.
iTunes
®
Tagging
The unit offers iTunes
®
Tagging, which
allows the user to "Tag" songs playing on
HD Radio™ stations for purchase later
through iTunes. When press [ISR] button on
the remote contorl, the unit stores the title
and artist song information that can then be
transferred to your iPod when connected to
the unit. A list titled "Tagged" will appear in
iTunes, allowing you the option to purchase
your tagged songs.
Note:
“i T u n e s
®
T a g g i ng ” funct i o n wo r k s by
connecting THD301 (sold separately).
iPod compatibility
For detailed information on the playable iPod
models, see our home page: www.clarion.
com
Note:
• iPhones can also be connected to this
system and “i Pod” ap pe aring in this
manual should be referred to as “iPod/
iPhone”.
• This system will not operate or may operate
improperly with unsupported versions.
Tagging music
To begin tagging music, tune to an HD Radio
station. The DIGITAL icon at the display must
be illuminated, indicating a digital station
is being received. TAG icon lights up when
Tagging function is ready. Press the [ISR]
button on the remote control. The tagging
function is highly depends on the receptions
of the radio station. If the channel reception
is insufcient, it will effect the operation of the
tagging function.
“Stored Tag ## of 64” will appear in the
display. The song information is saved to the
unit memory until your iPod is connected.
You can tag up to 64 songs before the tags
must be transferred to your iPod or deleted.
When the Tag memory reaches capacity
(64 tags) the bottom of the screen displays
“Memory Full”.
Table 5: TAG Messages
Tag Message Reason
STOR E D TA G ##
OF 64
If the Tag data is ready, and
[ISR] button on the remote
control is pressed
SENDING TAG ## Tag data is sending to iPod
MEMORY FULL Tag storage is full
TAG DATA IS NOT
AVAILABLE
Tag data is not available
IPOD FULL iPod memory is full
TAG NOT SUPPORT When connect and press
[ISR] button on the remote
control, the iPod without
Tagging function
Note:
Tags saved to your iPod can be managed
using the iTunes software, available at www.
apple.com/itunes.
Downloading tags to your iPod
To download tags to your iPod, plug your
iPod into the unit. All existing tags are
automatically transferred to the iPod and
deleted from the head unit’s memory. If your
iPod is connected when a song is tagged,
the Tag will be immediately transferred to the
iPod.
Note:
When transferring Tags to your iPod, the
unit must remain in HD RADIO mode. To
purchase tagged songs, you must sync your
iPod to iTunes and then click the “Tagged”
list on the left side of the iTunes software
screen. Click the “view” button for purchasing
information.
Note:
1. How to enter the iTunes tagging function?
“TAG” and “DI GITAL” light up when
Tagging function is ready, press [ISR]
button on the remote control to start
iTunes Tagging.
2. What is seen on the radio’s display to let
me know I have tagged the tune?
Press [ISR] button on the remote control
to show “STORED TAG ## OF 64”. After
connect to your iPod, the display shows
“SENDING TAG ##”.
If no connection, the display will show
“STORED TAG ## OF 64”. You could
save 64 Tag into E2PROM in total. When
you connect to your iPod, Tag information
will be saved in the iPod, and the data in
E2PROM will be cleared.
3. Then how do I get the tagged tune from
my iPod to the computer?
If you have install iTunes, connect your
iPod to your computer and buy songs
online.