User's Manual

Page 11/20
Clarion Confidential
Description of the button and the enterable white box in the TCU Control Tool:
# Name and View
Type Description
A
Initialize Tool
Button The ‘I nitialize Tool’ is the button to initialize the TCU Control Tool.
B
COM
Enterable
box
The ‘COM’ is the enterable white box to select the serial port number.
It is able to be selected from the drop-down list or be keyed by a keyboard.
C
COM OPEN
Button The ‘COM OPEN’ is the button to open the COM port number selected on the ‘COM’
D
COM CLOSE
Button The ‘COM CLOSE’ is the but ton to close the COM port number selected on the ‘COM’
E
Tool Status Message
Display
The ‘Tool Status Message’ is the display to show the status of TCU Control Tool.
A message is visible when the TCU Control Tool is running.
F
Tool Running I ndicator
Display
The ‘Tool Running I ndicator’ is the display to show the running condition of the TCU Control Tool.
When TCU Control Tool is running, the Tool Running I ndicator is blinking on and off.
This is just only for reference.
G
STOP TOOL
Button The ‘STOP TOOL’ is t he button to stop the TCU Control Tool.
H
Command Display
Display The ‘Command Display’ is the display to show the dialogue between TCU and the TCU Control Tool.
I
Command Box
Enterable
box
The ‘Command Box’ is the enterable box to enter the command you want to send to TCU.
J
Send Command
But ton The ‘Send Command’ is the button to send t he text of Command Box to TCU.
K
TX STATE
Display
The ‘TX STATE’ is the display to show the condition of sending a command from the TCU Control
Tool to the TCU.
While the TCU Control Tool is sending a command the TX STATE is colored green.
L
RX STATE
Display
The ‘RX STATE’ is the display to show the condition of receiving a command from the TCU to the
TCU Control Tool.
While the TCU Control Tool is receiving a command the RX STATE is colored orange.
M
TEST ENABLE
Button
The ‘TEST ENABLE’ is the button to ent er the TCU in TEST ENABLE MODE.
The TCU is able to accept sending/ receiving of t he other commands during the TEST ENABLE
MODE.
The TEST ENABLE MODE is reset after TCU restarted.
N
RES TEST ENABLE
Display
The ‘RES TEST ENABLE’ is the display to show the result message of the TEST ENABLE.
I f the TEST ENABLE is passed, the word ‘OK’ is displayed in the RES TEST ENABLE.
I t takes 20senconds to get the result after powered + 13.5V.
O
FORBID SLEEP
Button
The ‘FORBI D SLEEP’ is the button to enter the TCU in FORBID SLEEP MODE.
The TCU is able to be working during FORBID SLEEP MODE.
The FORBID SLEEP MODE is reset after TCU restarted.
P
RES FORBI D SLEEP
Display
The ‘RES FORBI D SLEEP’ is the display to show the result message of the FORBI D SLEEP.
If the FORBID SLEEP is passed, the word ’OK’ is displayed in the RES FORBID SLEEP.
Q
WCDMA TEST
Button
The ‘WCDMA TEST’ is the button to enter the TCU in WCDMA TEST MODE.
The TCU is able to communicate with WCDMA signaling tester during WCDMA TEST MODE.
The WCDMA TEST MODE is kept after TCU restarted. The WCDMA TEST MODE is stored in the non-
volatile memory.
R
RES WCDMA TEST
Display
The ‘RES WCDMA TEST’ is the display to show the result message of the WCDMA TEST.
I f the WCDMA TEST is passed, the word ’OK’ is displayed in the RES WCDMA TEST.
S
WCDMA TEST END
Button
The ‘WCDMA TEST END’ is the button to return the TCU in NORMAL MODE.
The TCU should be entered in NORMAL MODE when the test of connection with tester is ended.
T
RES WCDMA TEST
END
Display
The ‘RES WCDMA TEST END’ is t he display to show t he result of t he RES WCDMA TEST END.
I f t he WCDMA TEST END is passed, the word ‘OK’ is displayed in t he RES WCDMA TEST END.
U
GSM TEST
But ton
The ‘GSM TEST’ is the button to enter the TCU in GSM TEST MODE.
The TCU is able to communicate with GSM signaling tester during GSM TEST MODE.
The GSM TEST MODE is kept after TCU restarted. The GSM TEST MODE is stored in the non-volatile
memory.
V
RES GSM TST
Display
The ‘RES GSM TEST’ is the display to show the result message of the GSM TEST.
I f the GSM TEST is passed, the word ’OK’ is displayed in the RES GSM TEST.
W
GSM TEST END
Button
The ‘GSM TEST END’ is the button to return the TCU in NORMAL MODE.
The TCU should be entered in NORMAL MODE when the test of connection with tester is ended.
Y
RES GSM TEST END
Display
The ‘RES GSM TEST END’ is the display to show the result of the RES GSM TEST END.
I f t he GSM TEST END is passed, the word ‘OK’ is displayed in the RES GSM TEST END.