User's Manual

Page 19/20
Clarion Confidential
Appendix C. Accessories for Evaluation
As described above, the following accessories are used for evaluation.
Please connect according to the below when you test the TCU.
1. Power Cable
A colored YELLOW wire with banana plug should be connected to DC Power 13.5V (9~16V).
A colored BLACK wire with banana plug should be connected to the GND.
The other wires except them are not used and should be opened.
Refer to chapter 3.2 about the connector pin-out of TCUs
2. Serial Cable
The only three wires are used for serial communication.
The other wires except them are not used and should be opened.
Refer to chapter 3.2 about the connector pin-out of TCU.
To the TCU
To the GND
To the DC Power 13.5V
OPEN
Dont Use
OPEN
Dont Use
DC
Power
+
-
TCU
To the TCU
To the PC for Debug
OPEN
Dont Use
TCU