User Guide

Advancing to a Station Stored in a Preset Location
To move to a station stored in a preset location—
Using speech commands—
• Say “AutoPC.” Wait for the green “Listening” bar to appear; then speak the
next command.
• Say “Preset”
• Say “1” (or any number between 0 and 9 that represents an actual preset).
When using speech commands, be sure to pause between “Preset” and “Number.” To learn
how to set up station presets, see Editing Station Presets in this chapter.
Using the faceplate—
1. From Radio main screen, press the “1” key briefly to go to Preset 1.
2. Press other numbers to go to other stations stored under Presets.
Using the remote controller—
Use the internal keypad to press a number that corresponds to the stored
frequency.
90
User’s Manual
Important