User Guide

Recording a Station Name
To record and associate a speech command with a station name—
1. Set the radio station as one of the 10 presets on the key pad.
2. While listening to your favorite station, press MENU.
3. Press and select Edit Preset Stations, and then press ENT.
4. Press and select Record Station Name, and then press ENT. The screen
will show boxes for 10 presets.
5. If necessary, press to select the preset number for which you want to
record a station name. For reference, the station frequency associated with
the preset appears in the upper right corner of the display.
6. PressENTto proceed. The display reads “Say Command Word three times
at the tone prompt.
7. Press ENTand record the custom name three times as prompted by the
tone. Wait for the confirmation beep after each repetition.
A checkmark confirmation screen will appear when you are finished. The
main display will also indicate that the selected preset is “Trained”. To exit the
current screen, press BACK.
93
Using Radio