User Guide

If you are having trouble transferring data, be sure that your infrared ports are
aligned. If the problem persists, change your infrared transfer speed in the
Setup program
.
Recording a Custom Name for an Existing Contact
If you did not record a Custom Command when you entered a contact, follow the steps below
to record a custom name for an existing contact entry. You can then use the custom name as a
voice command for quickly locating and selecting the contact.
To record a custom name for an existing contact—
1. Press the Startkey to select Address Book. OR press (small screen) /
(large screen) to select Address Book. Press ENTto display the Address
Book main screen.
2. Press to find the desired contact entry.
3. Press MENU, then press to select Record a Contact Name(verify option),
and then press ENT.
4. At the display “Say Command Word three times at the tone prompt” press
ENT.
142
User’s Manual