User Guide
2. Press to step through the alphabet.
3. Press to find the next entry under the letter if you have many contacts
under a specific letter.
4. Press ENTto select a contact.
5. Press to select the Addressicon located in the upper right corner of the
display.
6. Press to select the address to which a route should be calculated, and
then press ENT.
7. Press to highlight the Calculatetab, and then press ENT. (Alternatively,
to view additional information about the entry, highlight Detail, and then
press ENT. To modify the entry, highlight Edit, and then press ENT.)
Once you select an entry and select the Address icon (small screen) or the Address List tab
(large screen), the display shows the address for the selected contact.
You can use the “Read” voice command to have the Joyride™ system read the addresses to
you before you calculate a route. If this is not the appropriate address for this person, say
“Next ” to review another address. Make sure the Address icon is selected to review all stored
addresses.
8. When you are finished, press BACKto return to the Address Book List.
Using Address Book
153