User Guide

Using the faceplate or remote controller—
1. Say “AutoPC.” Wait for the green “Listening” bar to appear. OR press the
PTTbutton.
2. Say “Voice Memo.”
3. Say “Record”, and then start talking.
4. Press ENTto stop recording.
Using menu commands—
1. Press the Start key to select Voice Memo. OR Press (small screen) /
(large screen) to select Voice Memo. Press ENTto display the main screen.
2. Press MENU.
3. Press to select Record, and then press ENT.
4. Press ENTagain to stop the recording.
If you are new to Voice Memo, conduct a test. Record a brief message and then play it back.
If the play back is too loud or too soft, you will need to adjust the Microphone Gain setting.
(See Adjusting Microphone Gain later in this section.)
Using Voice Memo
167
Scenario