User Guide

4. The Joyride™ system will start installing the operating system (OS) software.
The system will know if you have a configuration for large screen by
evaluating if large screen hardware is installed and then install the large
screen OS. If no large screen hardware is installed then the small screen OS
will be installed.
5.Reset Recommended - After the OS is installed, a reset is recommended.
Insert ballpoint pen into reset button as indicated on page xxvi.
6. Press the Powerbutton on the faceplate or press the Power On baron the
left side of the remote controller to turn the Joyride™ system ON.
CAUTION: DO NOT Press the Reset button while ACC (ignition) is OFF. This
will cause all software to be deleted and a complete reinstall of all software
will be required.
xxiv
User’s Manual