User Guide

Training a Speech Command
Before using the DVD Player the user must train the speech commands via the DVD menu.
To train a speech command—
1. Press the Startkey to select DVD Player. OR press (small screen) /
(large screen) to select DVD Player. Press ENTto display the DVD main
screen.
2. From the DVD main screen, press MENUto view a list of DVD Player
options.
3. Press or to select Train Speech Commandoption, and then press ENT.
4. The word to train appears at the top of the screen. Instruction “Say
Command Word 3 times...” appears. Press ENTto begin recording the word
“DVD Player.” Listen for the prompting “tone.” Yellow bars will start filling
the first of three boxes. Say “DVD Player” after each prompting tone – do
this 3 times.
5. A confirmation message should display, confirming your successful
recording. You can speak this voice command to start DVD Player from
another program.
If a 2 channel DVD Pro Logic disc is inserted the customer will note that sound is only coming from the
front 2 speakers. In the DVD menu, Pro Logic surround must be selected so that all speakers will
function with that disc.
20
User’s Manual
“DVD Player” must
be speech trained
after initial
software
installation and
must be selected as
one of the first ten
Global Commands
via Setup