TM
SAFETY WARNINGS AND PRECAUTIONS Please carefully read and follow these Safety Warnings and Precautions before using the Joyride™ System. • Only look at the screen when it is safe to do so and for a very short period of time. If you need to study the screen or look at the screen for a prolonged period of time, pull over and stop the car so that you can safely evaluate the information without risking danger to yourself or to others.
JoyRoute Plus™ Navigation for Manual Input Required • When you see this symbol in the manual, it means, for your safety and the safety of others, the vehicle must be stopped to carry out the described Joyride™ function or to change settings. Pull over in a safe and legal manner before attempting to manually access a function of the system. • The Joyride™ system responds to voice commands, menu selections, and shortcut keys.
• JoyRoute Plus™ Navigation Program is not a substitute for your personal judgment. You must follow all traffic regulations and use your personal judgment and knowledge of safe driving practices. Do not follow JoyRoute Plus™ Navigation instructions if it tells you to perform an unsafe or illegal maneuver, guides you into an area which you consider unsafe or places you in an unsafe situation.
JoyRoute Plus™ Navigation for iv
JoyRoute Plus™ Navigation for COPYRIGHT NOTICES JoyRoute Plus™ Large Display Copyright Information Clarion Co., Ltd. 2000 - 2001 All Rights Reserved Reproduction, adaptation, or translation without prior written authorization is prohibited, except as allowed under applicable copyright laws. Technology Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S.
JoyRoute Plus™ Navigation for Navtech® is a registered trademark of Navigation Technologies. Joyride™, JoyRoute™ and JoyRoute Plus™ are trademarks of Clarion Corporation of America. Microsoft®, Windows Media™, and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Portions based upon Microsoft Windows Media Technologies. Copyright© 1999 Microsoft Corporation. All Rights Reserved.
JoyRoute Plus™ Navigation for Warranty This Navigation User’s Manual creates no warranties, nor does it make any representations regarding the Joyride™ system or JoyRoute Plus™ Navigation software on behalf of Clarion. The only warranty provided by Clarion to the purchaser is that contained in Clarion’s published limited warranty for the Joyride™ system or JoyRoute Plus™ Navigation software.
JoyRoute Plus™ Navigation for viii
CONTENTS Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Software Installation - (Initially for Dealers) . . . . . . . . . . . . . . . . xi Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii Shotcut Keys Control Panel or Remote Controller . . . . . . . . . . . . xiii Quick View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Map Mode . . . . . . . . . . . . . . . . . . . . . . .
JoyRoute Plus™ Navigation for 5. Other Navigation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Recalculating a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Calculating an Alternate Route . . . . . . . . . . . . . . . . . . . . . . . . .39 Storing Current Destination Information . . . . . . . . . . . . . . . . . .40 Clearing Route Information . . . . . . . . . . . . . . . . . . . . . . . . . . .41 6. Setting Preferences . . . . . . . . . . . . . . . . . . . . . .
Software Installation - (Initially for Dealers) Congratulations on your purchase of the JoyRoute™ Plus Navigation software for Large Display! Caution: When installing the software, do not turn the ignition (ACC power) switch OFF. Also avoid pressing any buttons, keys or reset buttons. Hardware failures may result. Installing Navigation 1. Turn on vehicle ignition. 2. Insert the CD installation disc, JoyRoute Plus™ Navigation for Large Display into the in-dash DVD drive. 3.
JoyRoute Plus™ Navigation for Getting Help Context-Sensitive Help To get help from the screen you are currently viewing you can choose 1 of 3 ways. 1. Say “AutoPC.” Wait for the green “Listening” bar to appear, and then say “Help.” 2. Press the Push-to-Talk (PTT) button in your car or on the remote controller and then say “Help.” 3. Press the Help button on the faceplate for specific instructions for a screen you are currently viewing.
JoyRoute Plus™ Navigation for Shortcut Keys - Control Panel or Remote Controller 0 - Change Map Mode: N-Up / H-Up / Map / Freeway * -Zoom In # -Zoom Out 1 -Previous Destination 2 -Address Book 3 -Recalculate 4 -Day / Night Mode 5 -Return to Current Car Position 6 -Traffic Detail (if CUE AutoFM software is installed) 7 -Repeat Voice Guidance 8 -Traffic Information (if CUE AutoFM is installed) 9 -POI On/Off Use the remote controller surface buttons for quick access.
JoyRoute Plus Navigation for xiv
JoyRoute Plus™ Navigation for Quick View Quick View Map Mode The 2D Heading-Up map mode is the default view displayed when Navigation is launched. Heading-Up and North-Up are the available map orientations. Depending on how you configure settings from the Navigation options, additional information can be displayed. “Freeway Auto-Pop” images, 3D (with 1, 2 & 3 angles), the Turn-by-Turn mode and NextManeuver arrows, all enhance guidance information.
JoyRoute Plus™ Navigation for Turn-by-Turn-Mode Turn-by-Turn mode is an alternate display you can select during a calculated route to a destination. In this mode you can view pictorially, upcoming road maneuvers (turns) to make on to street or freeway exits, the street names and the distance you are away from your destination. The Car Position Indicator represents your car position on the map during a calculated destination route. It also appears on remaining map modes, Turn-by-Turn and Freeway Mode views.
Quick View JoyRoute Plus™ Navigation for There are three ways to change display to Turn-by-Turn mode— 1. Press “0” key on keypad until Turn-by-Turn mode is displayed. 2. From the Menu option, select Display Settings. 3. Using speech commands, say “Turn-by-Turn” (must be voice trained). Freeway Mode Freeway Mode is a view that pops up (if selected in set-up) or is selectable if on a freeway.
JoyRoute Plus™ Navigation for There are three ways to change display to Freeway mode— 1. Press “0” key on keypad until Freeway mode is displayed. 2. From the Menu option, select Display Settings. 3. Using speech commands, say “Freeway” (must be voice trained). Zooming and Scrolling When in 2-D or 3-D mode, you can scroll the map by using the Left, Right, Up or Down (arrow) keys on the faceplate or on the remote controller.
Quick View There are three ways to change display for zooming— 1. Use “*” key and “#” key for Zoom In and zoom Out. 2. From the Menu option, select Zoom In or Zoom Out. 3. Using speech commands, say “Zoom In” or “Zoom Out” (must be voice trained).
JoyRoute Plus™ Navigation for Description of POI (Points of Interest) Icons on the Map 6
JoyRoute Plus™ Navigation for Using Navigation Large Display 1. Using Navigation on Large Display IMPORTANT Welcome to JoyRoute Plus™ Navigation program for the Joyride™ system! The Joyride™ system has an optional Global Positioning System (GPS) -based navigation system that provides “turn-by-turn” instructions using the computer’s wave files to audibly guide you to a calculated destination.
JoyRoute Plus™ Navigation for Using a CD Changer and USB Hub (optional) Navigation requires a Navigation Technologies (Navtech®) CD data (SDAL version 1.7) disc that runs either in the DVD drive or in an optional, 6-disc CD Changer. If you only have a DVD/CD drive installed, you can use the Navtech data CD or DVD disc in the DVD drive. This will preclude using the drive for DVD movies.
Getting Started - Destinations JoyRoute Plus™ Navigation for 2. Getting Started Navigation requires a Navigation Technologies (Navtech) CD (SDAL version 1.7) data disc that runs either in the DVD drive or in an optional, 6-disc CD Changer. The Map CD must remain in the DVD drive (or in the optional UC-6 CD Changer) when running Navigation, removing it will delete the current route When you use the Navigation program, the program reads the CD as you travel.
JoyRoute Plus™ Navigation for Using the control panel keys, you can— • Set a destination based on Street Addresses, Points of Interest (POI), Address Book or Previous Destination • Store a current car location in the Address Book • Check the status of all the GPS components • Customize screen preferences Using the remote controller, you can— • Remotely set a destination based on Street Addresses, Points of Interest (POI), Address Book or Previous Destination • Remotely store the current location in the Ad
Getting Started - Destinations JoyRoute Plus™ Navigation for Starting the Navigation Program To start, insert the map CD; wait for initialization and reset requirements. If the Joyride™ system logo displays, press the Power button to launch the Joyride™ system. Then— Using speech commands— At anytime, press the PTT button to replace saying “AutoPC” • Say “Auto PC” or press the Push-to-Talk (PTT) button. • Say “Navigation.” Using the control panel— 1.
JoyRoute Plus™ Navigation for At anytime, press the PTT button to replace saying “AutoPC” Using the remote controller— 1. To align the remote controller, point the “transmitter” of the remote controller towards the Infrared (black) port of the Joyride™ system display. 2. When the map displays, press MENU on the remote controller. 3. Toggle the knob on the remote control up or down to select Enter Destination. 4.
JoyRoute Plus™ Navigation for Getting Started - Destinations On startup, the Navigation program displays a map with your current location. The startup mode for the map display is Heading-Up (H-up). This means that the Car Position indicator ( ) on the map which indicates your current position, will be pointing towards the top of the display if in H-up mode or in H-up mode and going North. H-Up also indicates that the map turns with you. Alternately, N-Up indicates actual North on a compass or road guide.
JoyRoute Plus™ Navigation for 14
Setting Destinations JoyRoute Plus™ Navigation for 3. Setting Destinations RememberH-Up (Heading Up) means “the map turns when you turn.” To calculate a route and get voice-guided instruction to your destination, you must first select destination. To start, select Enter Destination from the Navigation main menu. (See the list below.) At any time, you can use the remote controller to select Destination options.
JoyRoute Plus™ Navigation for When the system prompts you for input, press or use the keypad to enter letters or numbers in the highlighted edit box. Press to move to the next or previous edit box. To make corrections, press “*” to delete a character in the selected edit box. At anytime, press the PTT button to replace saying “AutoPC” As necessary, allow the system’s “auto-complete” feature to assist you with data entry.
Setting Destinations JoyRoute Plus™ Navigation for If you know the name of the city in which the address is located— 1. Select City Name and then press ENT. 2. Enter the city name, and then press ENT. 3. Enter the street name, and then press ENT. 4. Enter the building number as prompted, and then press ENT. 5. At the Destination Found screen, highlight Calculate, and then press ENT to calculate a route.
JoyRoute Plus™ Navigation for What if you don’t know the city name? If you do NOT know the name of the city in which the address is located— 1. Select Street Found and then press ENT. Shortcut: Press “2” to access Address Book 2. At the Street Found screen, press ;; if several street options are found, select the correct street name, and then press ENT. 3. At the City Name screen, press to select a City, and then press ENT. 4. As necessary, enter a building number, and then press ENT.
Setting Destinations JoyRoute Plus™ Navigation for 5. At the Destination Found screen, highlight Calculate, and then press ENT to calculate a route. (If you only wish to store the information, highlight Store, and then press ENT to save the destination in the Address Book.) The Joyride™ system starts calculating a route and announces “I will begin navigating.“ If you do NOT know the building number of the street address — Press ENT at the Address menu without entering any numbers.
JoyRoute Plus™ Navigation for If you know the name of the city in which the address is located— 1. Select Street Name, and then press ENT. 2. Enter a city name, and then press ENT. 3. At the Cities Found screen, press ENT. The first street name input form appears next. 4. Enter the name of the first cross street, and then press ENT. 5. At the Street Found screen, press ENT. The second street name input form appears next. 6. Enter the name of the second street, and then press ENT. 7.
Setting Destinations JoyRoute Plus™ Navigation for Shortcut: Press “1” for previous destination list 8. As prompted, highlight Calculate, and then press ENT to calculate a route to the destination. (If you only wish to store the information, highlight Store, and then press ENT to save the destination in the Address Book.) To view additional information, highlight Info, and then press ENT. If you do not know the name of the city in which the address is located— 1. Select Street Name, and then press ENT.
JoyRoute Plus™ Navigation for 4. At the Intersection Found screen, (after selecting the second street name) press ENT. 5. As prompted, highlight Calculate, and then press ENT to calculate a route to the destination. (If you only wish to store the address, highlight Store, and then press ENT to save the destination in the Address Book.) To view additional information, highlight Info, and then press ENT. The Joyride™ system starts calculating a route and announces “I will begin navigating.
Setting Destinations JoyRoute Plus™ Navigation for • Say “Airport,” “Gas Station,” “Hospital,” “Restaurant,“ “Hotel,” “Parking” and “Home.” Only the closest points of interest (POI) will be listed. Using the control panel — 1. From the Navigation main screen, press MENU. 2. Press to choose Enter Destination, and then press ENT. 3. Press to choose Points of Interest (POI), and then press ENT.
JoyRoute Plus™ Navigation for 4. Press and select the method you want to use to locate a useful place. (Your choices are: POI from Car Position, POI from Destination, POI from City Name and POI from Name.) 5. Press ENT. (Icons that represent points of interest by category—including restaurants, gas stations, airports, parking, and more—will appear in the display.) 6. Press to select a category, and then press ENT. 7. Follow the prompts to set a destination to the selected location.
Setting Destinations JoyRoute Plus™ Navigation for Using the Address Book To set a destination using an entry in the Address Book— Using speech commands— • Say “AutoPC” “Address Book.” To use “Locate” you must first save the Contact Name as a Voice Tag in Address Book. (See Joyride Owner’s Manual). • Say “Locate” followed by the Contact Name, if you assigned a Contact Name to a Voice Tag in Address Book.
JoyRoute Plus™ Navigation for • Say “Select.” • Say “Go There’*” or “Calculate.” The system will set the preferred address as the destination and the route will start calculating. Using the control panel— 1. Press MENU from the Map, Turn-by-Turn or Freeway display or press shortcut key “2” and skip to step 4. 2. Press to choose Enter Destination, and then press ENT. 3. Press to select Address Book, and then press ENT. 4. Press to select an entry, and then press ENT. 5.
Setting Destinations JoyRoute Plus™ Navigation for Using a Previous Destination The Previous Destinations list displays the last 20 recently used destinations as a contact. To set a destination using a Previous Destination— Using speech commands— • From the Navigation main screen, say “Auto PC,” then add any of the following: • “Previous Destination*.” • “Previous” or “Next.” • “Calculate” or “Go There*.” You can also press “1” shortcut key to calculate a recent destination.
JoyRoute Plus™ Navigation for Using the control panel— 1. From the Navigation main screen, press MENU. 2. Press to choose Enter Destination, and then press ENT. 3. Press to select Previous Destination, and then press ENT. 4. Press to select a previous destination from the list, highlight Calculate, and then press ENT. The Joyride™ system starts calculating a route and announces “I will begin navigating.
Setting Destinations JoyRoute Plus™ Navigation for Using a City Center To set a destination using a city center— 1. From the Navigation main screen, press MENU. 2. Press to select Enter Destination, and then press ENT. 3. Press to select City Center, and then press ENT.
JoyRoute Plus™ Navigation for 4. Enter a city name in the edit box, and then press ENT to view a list of city names that correspond to your entry. 5. When you find the city center destination you want to use, press ENT. 6. Highlight Calculate, and then press ENT.
Setting Destinations JoyRoute Plus™ Navigation for The Joyride™ system starts calculating a route and announces “I will begin navigating.“ Using Longitude and Latitude To set a destination using longitude and latitude information— 1. From the Navigation main screen, press MENU. Shortcut: Press “6” and “8” to read or hear Traffic details 2. Press to select Enter Destination, and then press ENT. 3. Press to select Longitude / Latitude , and then press ENT. The Input Longitude screen appears next.
JoyRoute Plus™ Navigation for 4. Press or enter via the faceplate number pad. Enter the Longitude information in degrees, minutes, and seconds, and then press ENT. The Input Latitude screen appears next. Note: Western hemisphere is negative (-) longitude and Southern hemisphere is negative (-) latitude 5. Press to enter the Latitude information in degrees, minutes, and seconds, and then press ENT. 6.
Setting Destinations JoyRoute Plus™ Navigation for Using speech commands— • Say “Auto PC” or press the Push-to-Talk (PTT) button. • Say “Home.” The Joyride™ system announces “I will begin navigating.“ Using the control panel— 1. From the Navigation main screen, press MENU. 2. Press to choose Enter Destination, and then press ENT. 3. Press to select Home and then press ENT. Navigation launches the contact in Address Book that was assigned as “Home” and calculates a route home.
JoyRoute Plus™ Navigation for 34
Display Modes JoyRoute Plus™ Navigation for 4. Navigation Display Modes You have four viewing mode options for viewing animated map directions: • Map mode: Heading-Up • Map mode: North-Up • Turn-by-Turn mode • Freeway mode (only available when car is on freeway Upon setting a destination and calculating a route, the system will display and highlight the route on the map; the voice guidance instructions will tell you how to proceed, distance to the next turn, where to turn, and what streets to turn on.
JoyRoute Plus™ Navigation for — OR — • Press MENU from the Navigation main screen, select Map Scale, and then press to change the map scale. To change map display mode— • Press MENU from the Navigation main screen, choose Display Settings from the Settings menu, and set the Map Heading option. In Heading-Up mode, the current location indicator will point up in the display. In North-Up mode, the map will always have North-Up on top. The car icon will not necessarily point north all the time.
Display Modes JoyRoute Plus™ Navigation for To change the default display mode— • Choose Settings and select the appropriate option. To view or hide the road name in the map display— • Choose Road Name: On or Road Name: Off in the Display Settings option of the Settings menu. To view or hide the arrival time in the map display— • Choose Arrival Time: On or Arrival Time: Off in the Display Settings option of the Settings menu.
JoyRoute Plus™ Navigation for Turn-By-Turn Mode In Turn-By-Turn mode, you view pictograms of the next maneuver (turn) and the distance to the next turn or exit. See Quick Views. The guidance voice announces the road name to turn on and the estimated time of arrival. To view a calculated route from the Turn-By-Turn display— Using speech commands— • Say “Auto PC.” • Say “Next” or “Previous” (next or previous sequential, calculated maneuver). Using the control panel— 1.
Other Navigation Options JoyRoute Plus™ Navigation for 5. Other Navigation Options Recalculating a Route You can recalculate a route if you deviate from the planned route, or clear route information to begin again. To recalculate a route— Using the control panel— Press the shortcut key “3” on the keypad. Calculating an Alternate Route The Detour option in Navigation allows you to calculate a different route based on an existing, calculated route. To calculate an alternate route— 1.
JoyRoute Plus™ Navigation for When you select Detour, the Detour Indicator will appear in the Map Display. Storing Current Destination Information Shortcut: Press “6” to display Traffic Detail For ready reference and input, you can store your current location in the Auto PC Address Book using the Save Current Position option. To save your current position in the Address Book— 1. From the Navigation main screen, press MENU. 2. Press to select Save Current Position, and then press ENT. 3.
Other Navigation Options JoyRoute Plus™ Navigation for Shortcut: Press “6” to display Traffic Detail Clearing Route Information To clear the current route using the control panel— 1. From the Navigation main screen, press MENU. 2. Press to select Clear Route, and then press ENT.
Setting Preferences JoyRoute Plus™ Navigation for 6. Setting Preferences Options in the Settings menu allow you to customize system settings and preferences. (See below.) From the Settings menu, you can modify route calculation criteria, change display settings, preview a route using the Demo Mode, change the voice scheme, check sensors, input home destination information, and view information about the program. These options are explained in further detail below.
JoyRoute Plus™ Navigation for 4. Press to select a setting, Fastest or Shortest. Press BACK to go to map mode. (Fastest means the program will calculate routes based on speed limits. Shortest means the program will calculate routes based on distance.) 5. When you are finished, press BACK repeatedly to return to the map display. To include or exclude road types— 1. Press MENU at the main screen. 44 2. Press to select Settings, and then press ENT. 3.
Setting Preferences JoyRoute Plus™ Navigation for 4. Press to select a usage type: Motorways, Toll Roads or Ferries, and then then press BACK. 5. If Motorways, Toll Roads or Ferries is selected, press to select “Yes” to include the usage type in the calculation, or “No” to exclude it. 6. When you are finished, press BACK repeatedly to return to the main screen. Setting Display Options To modify display settings— 1. Press MENU at the main screen. 2. Press to select Settings, and then press ENT. 3.
JoyRoute Plus™ Navigation for 4. Press to select the display items you want to show or hide. (Your choices are Map Road Name, Map POI, Map Color, Auto Zoom Map, Next Turn Preview, Distance Display, Traces Display, Freeway Pop-UP and Update Compass.) 5. Press and choose to view or hide the selected display item. 6. When you are finished, press BACK repeatedly to return to the main screen.
Setting Preferences JoyRoute Plus™ Navigation for To move the car position— 1. From the Navigation main screen, press MENU. 2. Press to select Settings, and then press ENT. 3. Press to select Move Car Position, and then press ENT. The Address Book launches and displays a contact list. Select a contact name and press ENT. 4. From the selected contact name screen, press and then press ENT. to highlight the Move tab, 5. Press to select “Yes.
JoyRoute Plus™ Navigation for Demo Mode The Demo option allows you to preview a route guidance calculation. In Demo mode the program will simulate and demo the vehicle traveling on the route that you have calculated and give a demonstration. You cannot activate Demo Mode or Move Car Position while the car is moving. Demo mode allows you to view a demonstration of route guidance. To use Demo mode— 1. Calculate a route to a destination (see Setting Destinations section in this chapter). 2.
Setting Preferences JoyRoute Plus™ Navigation for 5. Press to turn Demo mode On or Off. 6. Press BACK to return to the previous menu. Demo Mode will demonstrate the route using the current destination. The system will continue to repeat the demonstration until you turn Demo Mode off. If you have not entered a destination when you turn Demo Mode on, the system will display an error message. When a demonstration route is in the Map Display, the screen displays a blinking Demo Indicator.
JoyRoute Plus™ Navigation for The system will prompt you to cancel Demo Mode if you attempt any of these operations. To change the virtual car speed associated with Demo Mode— 50 1. Press to select Virtual Car Speed. 2. Press to select a different speed.
Setting Preferences JoyRoute Plus™ Navigation for Selecting a Voice Scheme To select a voice scheme— 1. From the Navigation main screen, press MENU. 2. Press to select Settings, and then press ENT. 3. Press to select Guidance Settings, and then press ENT. 4. Press to select Voice Scheme (Wave, TTS and Wave and TTS). 5. Press to change the setting. 6. Press BACK repeatedly until the main program appears.
JoyRoute Plus™ Navigation for With a “speed signal” connection, the USB Navigation unit UDR12 module offers the three inputs (above) for accurate car positioning. If the vehicle does not have speed signal connection, select the “GPS Only” option. To check sensors and view the status of GPS-related equipment— 1. Press MENU at the main screen. 2. Press to select Settings, and then press ENT. 3. Press to select Check Sensors, and then press ENT. 4.
Setting Preferences JoyRoute Plus™ Navigation for 5. You can press to see spool data, gyro data or USB data. 6. When you are finished, press BACK repeatedly to return to the main screen. If the system detects speed pulse or GPS, the car position will move back to the current position. Inputting your Home Destination To quickly calculate a route home, you can pre-program a home address as a destination. GPS Note: Your must first input Home to must first detect your current car position.
JoyRoute Plus™ Navigation for 2. Press to choose Settings, and then press ENT. 3. Press to select Input Home, and then press ENT. (Address Book launches) You must have previously entered your home address into the Address Book. 4. Press ENT. 5. Press to scroll through the list of contacts and select one, and then press to highlight Set To Home, and then press ENT. 6. Press ENT again to accept the confirmation. Press BACK to return to the previous menu.
Setting Preferences JoyRoute Plus™ Navigation for Training Custom Speech Commands The first time you install JoyRoute™ Navigation, the system may prompt you to train new, custom speech commands so that you can safely issue “hands free” Navigation commands. To train speech commands during initial installation— 1. When prompted to train a word (i.e., Turn-by-Turn, Airport, Go There, Previous Destination, Gas Station, Arrival, Hospital, or Display Map) press ENT. 2. Wait for the prompting tone ( ). 3.
JoyRoute Plus™ Navigation for Viewing Information About the Program To view program copyright and version information— 1. Press MENU at the main screen. 2. Press to select Settings, and then press ENT. 3. Select About JoyRoute™, and then press ENT. 4. Press to view program information. (Four screens provide information that may be useful when calling for technical support. The screen displays program version, local language, database, and navigation engine information.) 5.
JoyRoute Plus™ Navigation for FAQs and Troubleshooting FAQs and Troubleshooting An error message will be displayed if traffic is not available in Small Screen. In Large Screen traffic is “grayed out”. Verify that the CUE traffic device is attached to the USB hub. Q: A: Why does it take time for the navigation to work when it is first selected? When the navigation application is launched it will take approximately 2 minutes for initialization. Also, the navigation may require time for calibration.
JoyRoute Plus™ Navigation for Q: A: Why is there no navigation display? With ACC on, confirm the navigation application has been installed by viewing the Navigation menu from the shell menu. Confirm the Navtech CD or DVD is installed properly and not upside down. Be sure the application has been launched. Q: A: Why does night mode not work? Confirm that the display mode color is set to Auto and confirm illuminator is connected correctly (dealer may be required).
AccuRoute Plus™ Navigation for Glossary Glossary Dead Reckoning - See GPS / Dead Reckoning Module. DOP - Dilution of Precision. A collection of GPS data: factors like relative positions of satellites in the sky, latitude and longitude, car location and time of day, that pinpoint an accurate destination point. Freeway Auto-Pop - A selectable feature that enables freeways, freeway exits and streets to be displayed when the car is on a freeway in lieu of map modes or turn-by-turn mode.
JoyRoute Plus™ Navigation for Move Car Position - A method of setting an origin by accessing an address from Address Book. N-up - North-Up - An alternative map orientation where the Car Position indicator points to the direction the car is moving and the top of the display always points North. See H-Up. No Matching Road - The map data disc cannot find a street close by or one that matches the street name input. Street that is part of a calculation is farther than 50 yards (circa) away.
61
JoyRoute Plus Navigation for © Copyright Clarion Co.
