TM
SAFETY WARNINGS AND PRECAUTIONS Please carefully read and follow these Safety Warnings and Precautions before using the Joyride™ System. • Only look at the screen when it is safe to do so and for a very short period of time. If you need to study the screen or look at the screen for a prolonged period of time, pull over and stop the car so that you can safely evaluate the information without risking danger to yourself or to others.
JoyRoute™ Navigation for Manual Input Required • When you see this symbol in the manual, it means, for your safety and the safety of others, the vehicle must be stopped to carry out the described Joyride™ function or to change settings. Pull over in a safe and legal manner before attempting to manually access a function of the system. • The Joyride™ system responds to voice commands, menu selections, and shortcut keys.
• JoyRoute™ Navigation Program is not a substitute for your personal judgment. You must follow all traffic regulations and use your personal judgment and knowledge of safe driving practices. Do not follow JoyRoute™ Navigation instructions if it tells you to perform an unsafe or illegal maneuver, guides you into an area which you consider unsafe or places you in an unsafe situation. • All calculated routes that are provided by the JoyRoute™ Navigation Program may not be the perfect route for you.
JoyRoute™ Navigation for iv
COPYRIGHT NOTICES JoyRoute™ Small Display Copyright Information Clarion Co., Ltd. 2000 - 2001 All Rights Reserved Reproduction, adaptation, or translation without prior written authorization is prohibited, except as allowed under applicable copyright laws. Technology Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
JoyRoute™ Navigation for Navtech® is a registered trademark of Navigation Technologies. Joyride™, JoyRoute™ and JoyRoute Plus™ are trademarks of Clarion Corporation of America. Microsoft®, Windows Media™, and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Portions based upon Microsoft Windows Media Technologies. Copyright© 1999 Microsoft Corporation. All Rights Reserved.
JoyRoute™ Navigation for Warranty This Navigation User’s Manual creates no warranties, nor does it make any representations regarding the Joyride™ system or JoyRoute™ Navigation software on behalf of Clarion. The only warranty provided by Clarion to the purchaser is that contained in Clarion’s published limited warranty for the Joyride™ system or JoyRoute™ Navigation software.
JoyRoute™ Navigation for viii
JoyRoute™ Navigation for CONTENTS Safety Warnings and Precautions . . . . . . . . . . . . . . . . . . . .i Manual Input Required . . . . . . . . . . . . . . . . . . . . . . . . .ii Copyright Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix Software Installation - (Initially for Dealers) . . . . . . . . . . .xi Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JoyRoute™ Navigation for 4. Navigation Display Modes . . . . . . . . . . . . . . . . . . . . . .27 Map Display Mode Options . . . . . . . . . . . . . . . . . . . . . .28 Tracing your Route . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Turn-By-Turn Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .31 5. Other Navigation Options . . . . . . . . . . . . . . . . . . . . . . .33 Recalculating a Route . . . . . . . . . . . . . . . . . . . . . . . . . .33 Calculating an Alternate Route . . . .
JoyRoute™ Navigation for Software Installation - (Initially for Dealers) Congratulations on your purchase of the JoyRoute™ Navigation software for Small Display! Caution: When installing the software, do not turn the ignition (ACC power) switch OFF. Also avoid pressing any buttons, keys or reset buttons. Hardware failures may result. Installing Navigation 1. Turn on vehicle ignition. 2. Insert the CD installation disc, JoyRoute™ Navigation for Small Display into the in-dash DVD drive. 3.
JoyRoute™ Navigation for Getting Help Context-Sensitive Help To get help from the screen you are currently viewing you can choose 1 of 3 ways. 1. Say “AutoPC.” Wait for the green “Listening” bar to appear, and then say “Help.” 2. Press the Push-to-Talk (PTT) button in your car or on the remote controller and then say “Help.” 3. Press the Help button on the faceplate for specific instructions for a screen you are currently viewing.
JoyRoute™ Navigation for Shortcut Keys - Control Panel or Remote Controller Shortcut Keys 0 - Change Map Mode: N-Up / H-Up / Map / Freeway * -Zoom In # -Zoom Out 1 -Previous Destination 2 -Address Book 3 -Recalculate 4 -Day / Night Mode 5 -Return to Current Car Position 6 -Traffic Detail (if CUE AutoFM software is installed) 7 -Repeat Voice Guidance 8 -Traffic Information (if CUE AutoFM is installed) 9 -POI On/Off Use the remote controller surface buttons for quick access.
JoyRoute™ Navigation for xiv
JoyRoute™ Navigation for Quick Views Quick Views Map Mode The Heading UP map mode is the default view that displays when Navigation is launched. Heading-Up and North-Up are the available map orientations. Depending on how you configure Navigation, additional information can be displayed, such as estimated time to destination or Freeway Auto-Pop, and images like the Turn-by-Turn, next-maneuver arrows which enhance the guidance information for you.
JoyRoute™ Navigation for Turn-by-Turn Mode Turn-by-Turn mode is an alternate view you can select during a calculated route to a destination. It shows upcoming maneuvers, the street names, distance to the next-maneuver and estimated arrival time. The next-turn maneuver arrows fill and change in color to indicate how close the vehicle is to an upcoming turn.
JoyRoute™ Navigation for Quick Views Freeway Mode Freeway Mode is an alternate view that displays the next series of upcoming streets, freeways by name, and distances to the next exit along a calculated route if the current car position is on the calculated freeway route. The Car Position Indicator freeway form.
JoyRoute™ Navigation for Zooming and Scrolling Shortcut key: press * to zoom IN; press # to zoom OUT. xviii Map scrolling is accomplished by using the Left, Right, Up or Down (navigation) keys on the control panel or remote controller. Additionally, the remote controller joystick handles 8-way scrolling (including diagonal scrolls). A red crossbar cursor displays as a guide while scrolling.
JoyRoute™ Navigation for Using Navigation 1. Using Navigation on Small Display Welcome to the JoyRoute™ Navigation Software Program! The Joyride™ system has an optional Global Positioning System-based (GPS) navigation system that provides turn-by-turn instructions using the computer’s wave files and Text-to-Speech (TTS) to audibly guide you to a calculated destination. When selected, its TTS engine also reads back street names at critical-turn maneuvers along a route.
JoyRoute™ Navigation for Using speech commands, you can— • Calculate a route to the nearest Place of Interest (POI), e.g.
Using Navigation JoyRoute™ Navigation for Using a CD Changer and USB Hub (optional) The Map CD must remain in the DVD drive (or in the optional UC-6 CD changer) when running Navigation Navigation requires a Navigation Technologies (NAVTECH®) Map data disc that runs either in the DVD drive or in an optional CD Changer. If you do not have the CD changer, place the Navtech data disc into the DVD/CD drive. This will preclude using the drive for DVD movies or music.
JoyRoute™ Navigation for 4
Getting Started JoyRoute™ Navigation for 2. Getting Started The Navigation program requires a Navigation Technologies Map, CD or DVD disc (SDAL Version 1.7), that you must insert in the DVD drive or CD changer. Joyride reads the map disc as you travel. Important When first starting navigation, or if the CD cartridge is ejected in a CD changer with data discs, it will take approximately 2 minutes for the system to initialize.
JoyRoute™ Navigation for Using the control panel— 1. Press the NAV button on the faceplate to launch Navigation. OR Press the Start key, then press to select Navigation and press ENT. Note the remote control below. 2. The Navigation warning message appears. As required, press ENT to accept the warning message. (The Navigation warning message appears each time you start Navigation.
Getting Started JoyRoute™ Navigation for Using the remote controller— 1. To align the remote controller, point the “nose” of the remote controller towards the Infrared (black) panel below the Joyride display. 2. When the map displays, press MENU on the remote controller. 3. Rotate the joystick button up or down to select Enter Destination. 4. Press ENT.
JoyRoute™ Navigation for 8
Setting Destinations JoyRoute™ Navigation for 3. Setting Destinations RememberH-Up (Heading Up) means the map turns when you turn. Where do you want to go? On startup, the Navigation program may display a default location until the Global Positioning System (GPS) initializes and acquires sufficient satellite information (assuming the USB Navigation Unit UDR12 is installed).
JoyRoute™ Navigation for At any time, you can use the remote control to select Destination options From the Enter Destination menu, you can set a destination using: • A Street Address you enter • Crossroad (intersection) information you specify • An entry in the Points of Interest database (stored on the Map disc) • An entry in the Address Book • A Previous Destination • City Center information you specify • Latitude and Longitude information you specify • A pre-defined Home address These methods are desc
Setting Destinations JoyRoute™ Navigation for Using a Street Address To set a destination using a street address— 1. From the Navigation main screen, press MENU. Where do you want to go? 2. Press to choose Enter Destination, and then press ENT. 3. Press to choose Street Address, and then press ENT. If you know the name of the city in which the address is located— 1. Select “Yes” when the system asks if you know the city name, and then press ENT. 2. Enter the city name, and then press ENT.
JoyRoute™ Navigation for 4. Enter the street address information as prompted, and then press ENT. 5. At the Destination Found screen, highlight Calculate, and then press ENT to calculate a route. (If you only wish to store the information, highlight Store, and then press ENT to save the destination in the Address Book.) The Joyride™ system starts calculating a route and announces “I will begin navigating.“ If you do NOT know the name of the city in which the address is located— 1.
JoyRoute™ Navigation for Setting Destinations 4. At the City Name screen, look at the upper, right corner of the screen to view the number of city options found. Press to choose from the city choices you determine is correct, and then press ENT. Setting a destination using different methods 5. From the Enter Street Address edit boxes, enter a street address, and then press ENT. 6. At the Destination Found screen, highlight Calculate, and then press ENT to calculate a route.
JoyRoute™ Navigation for Setting a destination using crossroads Using Crossroads To set a destination using Crossroad (intersection) information— 1. From the Navigation map display, press MENU. 2. Press to choose Enter Destination, and then press ENT. 3. Press to select Cross Road, and then press ENT. If you know the name of the city in which the address is located— 1. Select ”Yes” when the system asks if you know the city name, and then press ENT. 2. Enter a city name, and then press ENT. 3.
JoyRoute™ Navigation for Setting Destinations 4. Enter the name of the first cross street, and then press ENT. 5. At the Street Found screen, press ENT. The second street name input form appears next. 6. Enter the name of the second street, and then press ENT. If you do not know the name of the second street, press ENT 7. At the Intersection Found screen, press ENT. 8. As prompted, highlight Calculate, and then press ENT to calculate a route to the destination.
JoyRoute™ Navigation for If you do not know the name of the city in which the address is located— 1.Select “No” when the system asks if you know the city name, and then press ENT. What if you don’t know the city name? 2. Enter the name of the first cross street, and then press ENT. 3. Enter the name of the second street, or if you do not know the name of the second street press ENT. 4.
Setting Destinations JoyRoute™ Navigation for If the Joyride™ system does not find a corresponding match in the database, the system displays a “No Matched Cross Road” error message. Using a Point of Interest (POI) To set a destination using an entry in the POI database— Using speech commands— • From Navigation main screen, press MENU. For faster contact name searching, say “Previous” or “Next” • Press to select Points of Interest, then say “Auto PC.” • Say “Next.
JoyRoute™ Navigation for Using the control panel— 1. From the Navigation main screen, press MENU. POI finds the 40 closest locations, noting distance and direction 2 Press to choose Enter Destination, and then press ENT. 3. Press to choose Points of Interest (POI), and then press ENT. 4. Press and select the method you want to use to locate a useful place. (Your choices are: POI from Car Position, POI from Destination, POI from City Name, and POI from Name.) 5.
Setting Destinations JoyRoute™ Navigation for Using the Address Book To set a destination using an entry in the Address book— Using speech commands— For faster contact name searching, say “Previous” or “Next” • From the Navigation main screen, say “Auto PC,” “Address Book.” • Then say, “Locate” followed by the Contact Name, if previously recorded. You can also say “Previous” or “Next” to advance to the next entry.
JoyRoute™ Navigation for Using the control panel— 1. Press MENU from the map display screen. 2. Press to select Address Book, and then press ENT. 3. Press to select a contact entry, and then press ENT. 4. A contact name displays. Press ENT to display the address. If the address is not the desired address, press to choose the desired address. Press to highlight Calculate, and then press ENT. The Joyride™ system starts calculating a route and announces “I will begin navigating.
Setting Destinations JoyRoute™ Navigation for • Say “Previous” or “Next.” • Say “Go There.” – OR – • Say “Calculate.” Using the control panel— 1. From the Navigation map display, press MENU. 2. Press to choose Enter Destination, and then press ENT. 3. Press to select Previous Destination, and then press ENT. 4. Press to select a previous destination from the list, highlight Calculate, and then press ENT. The Joyride™ system starts calculating a route and announces “I will begin navigating.
JoyRoute™ Navigation for Using a City Center To set a destination using a city center— 1. From the Navigation main screen, press MENU. 2. Press to choose Enter Destination, and then press ENT. 3. Press to select City Center, and then press ENT. 4. Enter a city name in the edit box, and then press ENT to view a list of city names that correspond to your entry. Otherwise, press ENT to view a list of cities. 5. When you find the city center destination you want to use, press ENT. 6.
Setting Destinations JoyRoute™ Navigation for Using Longitude and Latitude To set a destination using longitude and latitude information— 1. From the Navigation main screen, press MENU. 2. Press to choose Enter Destination, and then press ENT. 3. Press to select Longitude / Latitude, and then press ENT. The Input Longitude screen appears next. 4. Press to enter the Longitude information in degrees, minutes, and seconds, and then press ENT. The Input Latitude screen appears next. 5.
JoyRoute™ Navigation for 6. At the confirmation screen, highlight Calculate, and then press ENT to calculate a route to the Longitude or Latitude position you entered. If you only wish to store the address, highlight Store, and then press ENT to save the information in your Address Book. The Joyride™ system starts calculating a route and announces “I will begin navigating. “ Using Home To calculate a route Home— To set up your Home destination, see Inputting Your Home Destination in Setting Destinations.
Setting Destinations JoyRoute™ Navigation for Using the control panel— 1. From the Navigation main screen, press MENU. 2. Press to select Enter Destination, and then press ENT. 3. Press to select Home. 4. Press ENT.
JoyRoute™ Navigation for 26
Navigation Display Modes JoyRoute™ Navigation for 4. Navigation Display Modes You have four display mode options for viewing animated route directions. • Map mode: Heading-Up • Map mode: North-Up • Turn-by-Turn mode • Freeway mode Upon setting a destination and calculating a route, the system will display and highlight the route on the map; the voice guidance instructions will tell you how to proceed, how far to the next turn, where to turn, and what streets on which to turn.
JoyRoute™ Navigation for Map Display Mode Options Press “*” to Zoom IN. Press “#” to Zoom OUT for a smaller view As described below, you can change various settings, to enable other useful information on the map during a calculated route. The options below are only a few of the several options. To change the map scale— Press the “*” or “#” keys on the keypad to set or change the viewing scale or say “AutoPC” and then “Zoom In” or “Zoom Out.
Navigation Display Modes JoyRoute™ Navigation for To change the map color— 1. Press MENU from the Navigation main screen, Press Settings, then press ENT. Shortcut: Press “4” to switch display from Day to Night 2. Press again to select Display Settings then press Day or Night. to select Display to set Map Color to Auto, 3. If you set the Map Color (Auto, Day or Night) to Auto, Day mode will remain until you turn on the driving lights. At this time Night mode will be active. 4.
JoyRoute™ Navigation for To view or hide the arrival time in the map display— 1. Press to select Settings, and then press ENT. 2. Press to select Display Settings. 3. Press to select Arrival Time, then press to set time On or Off. Tracing your Route To manage the trace display option— 1. Press to select Settings, and then press ENT. 2. Press to select Display Settings, and then press ENT. 3. Press to select Traces Display, and then press ENT. 4. Press to set Traces Display On or Off.
Navigation Display Modes JoyRoute™ Navigation for Turn-By-Turn Mode In Turn-By-Turn mode, you view pictograms of the next maneuver (turn) and the distance to the next turn or exit. See Quick Views. The guidance voice announces the road name to turn on and the estimated time of arrival. To preview a calculated route from the Turn-By-Turn screen— Using speech commands— • Say “Auto PC.” • Say “Next” or “Previous” (next or previous sequential, calculated maneuver). Using the control panel— 1.
JoyRoute™ Navigation for 32
Other Navigation Options JoyRoute™ Navigation for 5. Other Navigation Options Recalculating a Route Shortcut: Press “3” to re-calculate a route Navigation automatically re-calculates the route when the driver deviates more than 50 yards from the originally calculated route. To manually re-calculate a route— Press the “3” key on the keypad. Calculating an Alternate Route The Detour option allows you to calculate a different route from an existing calculated route. To calculate an alternate route— 1.
JoyRoute™ Navigation for 4. You can also use “Detour” speech command to calculate a new route. When you select Detour, the Detour indicator appears in the Map Display. Storing Current Destination Information For ready reference and input, you can store your current car location in the Joyride™ system Address Book using the Save Current Position option. To save your current position in the Address Book— Press and hold ENT for 1 second. – OR – 1. From the Navigation main screen, press MENU. 2.
Other Navigation Options JoyRoute™ Navigation for You can also save any address you select as a destination to Address Book by highlighting the Store button, and then pressing Enter. Clearing Route Information To clear the current route using the control panel— 1. From the Navigation main screen, press MENU. 2. Press to select Clear Route, and then press ENT.
JoyRoute™ Navigation for 36
Setting Preferences JoyRoute™ Navigation for 6. Setting Preferences Options in the Settings menu allow you to customize system settings and visual preferences you want to see and aid you while driving. From the Settings menu, you can modify route calculation criteria, change display settings, preview a route using the Demo Mode, change the voice scheme, check sensors, input home destination information, and view information about the program. These options are explained in further detail below.
JoyRoute™ Navigation for 4. Press to choose a setting, and then press ENT. Your choices here are: Fastest or Shortest. (“Fastest” means the program will calculate routes based on speed limits. “Shortest” means the program will calculate routes based on distance.) Most of these settings are recommendations only. The “fastest” may not appear to be fast. 5. When you are finished, press BACK repeatedly to return to the map display. To include or exclude road types— 1. Press MENU at the map display screen. 2.
Setting Preferences JoyRoute™ Navigation for 6. When you are finished, press BACK repeatedly to return to the map display screen. Setting Display Options To modify display settings— 1. Press MENU at the map display screen. 2. Press to select Settings, and then press ENT. 3. Press to select Display Settings, and then press ENT. 4. Press to select the display items you want to show or hide. (Your choices are Map Color, Road Name, Arrival Time, Traces Display, and Freeway Auto-Pop Up). 5.
JoyRoute™ Navigation for 6. When you are finished, press BACK repeatedly to return to the map display screen. Moving the Car Position The Move Car Position option allows you to calculate a destination by selecting an address stored in the Address Book database. The car is then moved to that address. You cannot activate Demo Mode or Move Car Position while the car is moving. To move the car position— 1. From the Navigation main screen, press MENU. 2. Press to select Settings, and then press ENT. 3.
Setting Preferences JoyRoute™ Navigation for Demo Mode The Demo option allows you to preview a route guidance calculation. When Demo Mode is turned on the Joyride™ system simulates the vehicle traveling along the route that you have calculated for demonstration purposes. To use Demo mode— 1. Calculate a route to a destination (see Setting Destinations in this chapter). 2. Press MENU at the map display screen. 3. Press to select Settings, and then press ENT. 4. Press to select Demo Mode. 5.
JoyRoute™ Navigation for Demo Mode on, the system will display an error message. In Demo mode, the screen displays a blinking Demo indicator. When Demo Mode is on, note that you cannot do the following— • Move the car position • Enter a destination • Save the current position • Return to the current position The system will prompt you to cancel Demo Mode if you attempt any of these operations. GPS will detect the current car position after exiting Demo mode.
Setting Preferences JoyRoute™ Navigation for Selecting a Voice Scheme You can set the number of times Voice Guidance announces an upcoming maneuver. To select a voice scheme— 1. From the Navigation main screen, press MENU. 2. Press to select Settings, and then press ENT. 3. Press to select Guidance Settings, and then press ENT. 4. Press to select Voice Scheme. 5. Press to change the setting to 2 Times or 3 Times. 6. Press BACK repeatedly until the main program appears.
JoyRoute™ Navigation for Setting Voice Guide Type You can choose to listen to route instructions produced by pre-recorded wave files, hear a combination of wave files and TTS for road names shown in text on the map, or choose to have the TTS speech engine read text-based road names only. To select the voice guide type— 1. From the Navigation main screen, press MENU. 2. Press to select Settings, and then press ENT. 3. Press to select Guidance Settings, and then press ENT. 4. If necessary, press 5.
Setting Preferences JoyRoute™ Navigation for To check sensors and view the status of GPS-related equipment— 1. Press MENU at the map display screen. 2. Press to select Settings, and then press ENT. 3. Press to select Check Sensors, and then press ENT. 4. Press to scroll through the following information screens: Positioning, Check GPS, Check Speed, Check Gyro, and Check Connection (networks). 5. To set the GPS signal for vehicle Positioning, press speed pulse or GPS Only. to select GPS + gyro + 6.
JoyRoute™ Navigation for Inputting Your Home Destination Note: Your must first input Home to Address Book To quickly calculate a route home, you can pre-program a home address as a destination. GPS must first detect your current car position. Setting a Home destination To set the Home destination — 1. Press MENU at the map display screen. 2. Press to select Settings, and then press ENT. 3. Press to select Input Home, and then press ENT. Address book is launched and a contact or list of contacts display.
Setting Preferences JoyRoute™ Navigation for 5. Press to highlight Set To Home, and then press ENT. A “Set to Home” confirmation displays with an announcement. (To see Details only press .) 6. Press BACK to return to Navigation. Alternatively you can enter a destination using the Enter Destination, Street Address option menu and “Store” the address in Address Book. Now when you attempt to find the Home Address for setting “Home” it will already be in the Address Book.
JoyRoute™ Navigation for Training Speech Commands The first time you install Navigation, the system may prompt you to train new custom speech commands so that you can safely issue “hands free ”Navigation commands. To train speech commands during initial installation— 1. When prompted to train a word (i.e., Turn-by-Turn, Airport, Go There, Previous Destination, Gas Station, Arrival, Hospital, or Display Map) press ENT. 2. Wait for the prompting tone ( ). 3.
Setting Preferences JoyRoute™ Navigation for Viewing Information About the Program To view program copyright and software version information— 1. Press MENU at the map display. 2. Press to select Settings, and then press ENT. 3. Select About Navigation, and then press ENT. 4. Press to view program information. (Provide this information when calling for technical support.) The screen displays program version, local language, copyright, database, and navigation engine information. 5.
JoyRoute™ Navigation for FAQs and Troubleshooting 50 Q: A: Why does it take time for the navigation to work when it is first selected? When the navigation application is launched it will take approximately 2 minutes for initialization. Also, the navigation may require time for calibration. The user may need to drive for about 1/2 hour to complete the calibration. This will only be required the first time the system is launched or after the program is reinstalled.
FQA & Troubleshooting JoyRoute™ Navigation for Q: A: Why does night mode not work? Confirm that the display mode color is set to Auto and confirm illuminator is connected correctly (dealer may be required). Q: If everything was installed and all wiring has been confirmed and the system does not seem to work properly what can I do? First try to turn the ignition (ACC cycle) OFF and ON.
JoyRoute™ Navigation for Glossary Dead Reckoning - See GPS / Dead Reckoning Module. DOP - Dilution of Precision. A collection of GPS data: factors like relative positions of satellites in the sky, latitude and longitude, car location and time of day, that pinpoint an accurate destination point. Freeway Auto-Pop - Freeway mode automatically “pops up” when entering a freeway while following a calculated route.
JoyRoute™ Navigation for Glossary H-Up Heading-Up - The default map orientation that reflects the direction in which the vehicle is moving during a calculated route. See N-Up. N-Up North-Up -Map points North Up. Car icon moves in direction of travel. Move Car Position - A method of setting a destination by accessing an address from Address Book. POI - Point of Interest. A method of defining a destination using a Point of Interest (POI). POIs include gas stations, airports, hotels and restaurants.
JoyRoute™ Navigation for © Copyright Clarion Co.