Owner`s manual
Basic
Operations
Adjusting
the Z-Enhancer Plus
1.
Press the [Z+] button and select the Z-
Enhancer Plus mode to adjust.
2. Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the +
direction; turning it counterclockwise adjusts
in the - direction.
• When "B-BST 0"
is
selected, you can adjust
the bass
in
the range of
-3
to
3.
• When
"IMPACT
0"
is
selected,
you
can ad-
just the bass and treble
in
the range of
-3
to
3.
• When "EXCITE 0"
is
selected, you can adjust
the bass and treble
in
the range of
-3
to
3.
.When
"CUSTOM"
mode
is
selected, bass
gain, frequency and Q-curve, and treble gain
and frequency can
be
adjusted.
* Press and hold the [Z+] button for 1 second or
longer, then the setting parameter of bassi
treble will
be
initialized with a display
"Z+FLAT".
- B-BOOST
-IMPACT
- EXCITE
- CUSTOM
- Z+
OFF
bass emphasized
bass and treble
emphasized
bass and treble
emphasized mid de-
emphasized
user custom
no sound effect
Note:
•
If
the
rear
line level output is
set
to the full range
"REAR"
setting, "S-VOL" will
not
be
shown as a
selection.
Adjusting
the
bass
(Gain, Frequency, Q-curve)
This adjustment can be performed when the
Z-Enhancer Plus is set to "CUSTOM".
1.
Press the
[A-M]
button
and
select
"BASS".
2. Turning the [ROTARY] knob clockwise
emphasizes the bass; turning it
counterclockwise attenuates the bass.
*The factory default setting
is
"B<G 0>".
(Adjustment range:
-6
to +6)
3.
Press the
[~
....
]
or
[~~]
button to select
"B<F 60>".
Turn the [ROTARY] knob to select the
frequency.
*The factory default setting
is
"B<F 60>".
(Adjustment 60/100/200
Hz)
4. Press the
[~
....
]
or
[~~]
button to select
"B<Q 1>".
Turn the [ROTARY] knob to select the Q-
curve.
*The factory default setting
is
"B<O 1>".
(Adjustment 1
/1
.25/1
.5/2)
5.
When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting
the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
• When
"B-BOOST"
is
set
"S-VOL
0"
..
"B-BOOST"
..
"BAL
0"
..
"FAD
0"
..
Last
function
mode.
• When "IMPACT"
is
set
"S-VOL
0"
..
"IMPACT"
..
"BAL
0"
..
"FAD
0"
..
Last
function
mode.
.When
"EXCITE"
is
set
"S-VOL
0"
..
"EXCITE"
..
"BAL
0"
..
"FAD
0"
..
Last
function
mode.
• When "CUSTOM"
is
set
"S-VOL
0"
..
"BASS"
..
"TREBLE"
..
"BAL
0"
..
"FAD
0"
..
Last
function
mode.
.When
"Z+
OFF"
is
set
"S-VOL
0"
..
"BAL
0"
..
"FAD
0"
..
Last
function
mode.
16
M455A
Adjusting
the treble
(Gain, Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1.
Press the
[A-M]
button and select ''TREBLE''.
2.
Turning the [ROTARY] knob clockwise
emphasizes the treble; turning it
counterclockwise attenuates the treble.
*The factory default setting
is
"T<G 0>".
(Adjustment range:
-6
to +6)
3.
Press the
[~
....
]
or
[~~]
button to select
"T<F 10>".
Turn the [ROTARY] knob to select the
frequency.
*The factory default setting
is
"T
<F
10>".
(Adjustment 10 kHz/15 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.