Owner`s manual

Radio Operations
Seek
tuning
1. Press the [BND] button and select the
desired band (FM or AM).
* If "MANU" is lit in the display, press and hold
the [BND] button for 1 second or longer.
"MANU"
in the display goes off, and seek
tuning is now available.
2. Press the [~ ..... ] or [~~] button to
automatically seek a station.
When the
[~~] button is pressed, the station
is sought in the direction of higher frequencies;
if the
[~ ..... ] button is pressed, the station is
sought in the direction of lower frequencies.
Manual tuning
There are 2 manual tuning methods available:
Quick tuning and step tuning.
When you are
in the step tuning mode, the
frequency changes one step at a time.
In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [BND] button and select the
desired band (FM or AM).
* If "MANU" is not lit in the display, press and
hold the [BND] button for 1 second or longer.
"MANU" is lit
in the display and manual tuning
is now available.
2. Tune in a station.
.Quick tuning:
Press and hold the [~ ..... ] or [~~] button for
1 second or longer to tune
in a station.
• Step tuning:
Press the [~ ..... ] or [~~] button to manually
tune
in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exist to store individual radio
stations
in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
1. Press the [BND] button and select the
desired band (FM or AM).
2. Press the corresponding [DIRECT] button to
recall the stored station.
* Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
18 M455A
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned
in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Press the [BND] button and select the
desired band (FM or AM).
2. Press and hold the [PIA] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station
in memory.
1. Press the [PIA] button.
2. When a desired station is tuned in, press the
[PIA] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [PIA] button
for
2 seconds or longer, otherwise the auto store
function is engaged
and the unit starts storing
stations.
Instant station recall (ISR)
Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even
operates with the unit
in other modes.
.ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Press and hold the [ISR] button for 2 seconds
or longer.
• Recalling a station with ISR
In any mode, press the [ISR] button to turn on the
radio function and tune the selected radio station.
"ISR" appears in the display. Press the [ISR]
button again to return to the previous mode.
Note:
• Radio operations are disabled during ISR mode.
Press one
of the [DIRECT] buttons to return to
the previous mode.