Owner`s manual
CD Operations
Random
play
Random play selects and plays individual tracks
on a disc in no particular order. This function
continues automatically until it is cancelled.
1.
Press the
[ROM]
button.
2.
To
cancel the random play, press the [ROM]
button again.
Operations Common
to
Each Mode
Setting
the
clock
1.
Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2.
Press the
[~
.....
] or
[~~]
button to select
"CLOCK".
3.
Press the
['-11
] button.
4.
Press the
[~
.....
] or
[~~]
button to select the
hour or the minute.
5.
Turn the [ROTARY] knob to set the correct
time.
*The clock is displayed
in
12-hour format.
6.
Press the
['-11
].
button to store the time into
memory.
7.
Press the [T] button to return to the previous
mode.
Note:
•
You
cannot
set
the clock when
it
is displayed with
only the ignition on.
If
you drain
or
remove the
boat's battery
or
take
out
this unit, the clock is reset.
While setting the clock,
if
anotherbutton
or
operation is selected, the clock
set
mode is
canceled.
Turning the screen
saver
function
on
or
off
This unit is provided with the screen saver
function which allows you to show various kinds
of patterns and characters
in
the Operation
Status indication area of the display in a random
order.
You
can turn on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
*The factory default setting
is
"OFF".
1.
Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
20
M455A
2.
Press the
[~
.....
] or
[~~]
button to select
"SCRN SVR".
3.
Press the
['-11]
button.
4.
Turn the [ROTARY] knob to select the
setting. Each time you turn the [ROTARY]
knob, the setting changes
in
the following
order:
OFF
-.
SS
-.
MESSAGE
5.
Press the
['-11
] button to store the setting.
6.
Press the [T] button to return to the previous
mode.
Entering
MESSAGE INFORMATION
Message up to 30 characters long can be stored
in
memory and displayed for any mode.
*The factory default setting is
"WELCOME
TO
CLARION".
1.
Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2.
Press the
[~
.....
] or
[~~]
button to select
"INPUT".
3.
Press the
['-11]
button.
4.
Press
the
[BND]
button
to
clear
the
old
message.
5.
Press the
[~
.....
] or
[~~]
button to move the
cursor.
6.
Press the [OISP] button to select a character.
Each time you press the [OISP] button, the
character changes in the following orders:
Numbers
-.
Symbols
-.
Capital
letters
-.
Numbers
...
7.
Turn the [ROTARY] knob to select the
desired character.
8.
Repeat step 5 to 7 to enter up to 30
message characters.
9.
Press and hold the
['-11
] button for 2 seconds
or longer to store the message in memory
and cancel the input message.
1O.Press the [T] button to return to the previous
mode.