Owner’s manual & Installation manual DVD MULTIMEDIA STATION WITH TOUCH PANEL CONTROL Clarion Co., Ltd. All Rights Reserved.Copyright © 2006: Clarion Co., Ltd.
80QZ6070KA-00.0_EN.book Page 2 Monday, February 27, 2006 2:12 PM Thank you for purchasing the Clarion MAX667VD. English * * * * * Owner’s manual This owner’s manual is for the MAX667VD. Please read this manual thoroughly before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual.
280QZ6070KA-00.0_EN.book Page 3 Monday, February 27, 2006 2:12 PM ■ CD-R/CD-RW/DVD-R/DVD-RW Compatible ■ 5.1 Channel Decoder for DTS and Dolby Digital Ready ■ Optical Digital Output ■ 2-ZONE Control ■ iPod® Control “iPod” is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Expanding Systems Expanding audio features Expanding visual features TV Tuner CCD Camera CeNET CD Changer CeNET DVD Changer VTR etc.
280QZ6070KA-00.0_EN.book Page 4 Monday, February 27, 2006 2:12 PM English 2. PRECAUTIONS WARNING Owner’s manual For your safety, the driver should not watch the DVD video/TV/VTR or operate the controls while driving. Please note that watching and operating the DVD video/TV/VTR while driving are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard. 1.
280QZ6070KA-00.0_EN.book Page 5 Monday, February 27, 2006 2:12 PM / / Owner’s manual Operation panel / / English 3. CONTROLS / / / / [&] (POWER) [7] (OPEN/CLOSE) Sensor / / / / [ISR] [ADJ] Blink LED / / / [iPod] / [SRC] [CONT.
280QZ6070KA-00.0_EN.book Page 6 Monday, February 27, 2006 2:12 PM English 4. NOMENCLATURE Names of Buttons Owner’s manual Note: • Be sure to read this chapter while referring to the front diagrams for chapter “3.CONTROLS” on page 5 (unfold). • Press this button to mute the sound in the TUNER/TV/VISUAL modes. [R], [F] buttons • Press this button to turn on the power. Keep pressing this button more than 1 second to turn off the power.
280QZ6070KA-00.0_EN.book Page 7 Monday, February 27, 2006 2:12 PM English 5. OUTLINE OF BUTTON AND TOUCHKEY OPERATION Owner’s manual Turning the power on Engine ON position ∗1 & (POWER) System check The CeNET format utilized on this unit is provided with a system check function. When the system check function is performed under the following conditions, the power is automatically turned off. Press the [&] (POWER) button again. •When power is first turned on after initial installation.
280QZ6070KA-00.0_EN.book Page 8 Monday, February 27, 2006 2:12 PM TUNER mode operation English (Source menu) Owner’s manual ∗3 (Key Pad screen) ∗4 (Preset List screen) ∗Enters desired frequency. 1 0 7 9 0 ENT ∗5 ∗Selects desired station. (Title input screen) Note: ∗1:The operation button is [ & ](POWER) button in the description of operation per mode. ∗2:External equipment not connected with CeNET is not displayed. ∗3:When the TUNER mode is currently selected, touch [Back] key.
280QZ6070KA-00.0_EN.book Page 9 Monday, February 27, 2006 2:12 PM DVD Video mode operation English (DVD PLAYER mode screen)∗6 (Source menu) Owner’s manual ∗Screen during DVD mode when automobile moving. (Option menu) (DVD SETUP menu) Note: ∗6:When displaying movies in DVD video mode, touching the screen surface will cause the DVD PLAYER mode screen to be displayed.
280QZ6070KA-00.0_EN.book Page 10 Monday, February 27, 2006 2:12 PM Adjusting audio feature settings English (From any screen) Owner’s manual When a 5.1 ch Surround Decoder is connected (ADJUST mode menu) (AUDIO menu) (AUDIO EXT.
280QZ6070KA-00.0_EN.book Page 11 Monday, February 27, 2006 2:12 PM English Owner’s manual (AUDIO menu) (AUDIO EXT.
280QZ6070KA-00.0_EN.book Page 12 Monday, February 27, 2006 2:12 PM Adjusting the other system settings English (From any screen) Owner’s manual (ADJUST mode menu) (GENERAL menu) (MONITOR menu) (CLOCK) (CLOCK screen) (MONI ADJ) (Monitor Adjust screen) (Hour, Minute, a.m./p.m.) Bright Color Hue Dimmer ∗Switched by touching this key repeatedly. (“Hue” is not displayed when displaying PAL images.
280QZ6070KA-00.0_EN.book Page 13 Monday, February 27, 2006 2:12 PM English 6. REMOTE CONTROL Remote control unit Owner’s manual Signal transmitter Operating range: 30˚ in all directions [BAND] [MUTE] [SRC] [VOLUME] [P.TIME] [0-9] [DISC SEL] [ ],[ ] [SEARCH MODE] [MENU] [RTN] [TOP MENU] [SET UP] [ENT] [ ],[ ] [ISR] [2-ZONE] [RPT] [SCN] [PBC] [RDM] [AUDIO] [SLOW] [ANGLE] [SUB TITLE] Inserting the Batteries 1. Slide the rear cover in the direction of the arrow, and remove it. 2.
280QZ6070KA-00.0_EN.book Page 14 Monday, February 27, 2006 2:12 PM English Functions of Remote Control Unit Buttons You can use the remote control unit to control the MAX667VD. When the 2-ZONE function is ON, the controls work upon the selected zone. Shared modes Owner’s manual [SRC] button • Press this button to turn on the power. Keep pressing this button more than 1 second to turn off the power. • Press this button to switch the modes such as TUNER mode, DVD PLAYER mode.
280QZ6070KA-00.0_EN.book Page 15 Monday, February 27, 2006 2:12 PM Functions of Remote Control Unit Buttons • Press to play tracks at random in CD and MP3/ WMA modes. • Keep pressing more than 1 second to play folders at random in MP3/WMA mode. [RTN] button • Press to switch to the menu screen while a Video CD is being played back. Press to switch to the previous screen display while the Menu screen is being displayed. However, it may occur that this button operation dose not work on some discs.
280QZ6070KA-00.0_EN.book Page 16 Monday, February 27, 2006 2:12 PM Functions of Remote Control Unit Buttons English Owner’s manual [0 - 9] buttons [RPT] button • Press to enter track numbers in the Key Pad screen. • Press to select the disc number in the Disc List screen. • Press to perform track repeat. • Keep pressing more than 1 second to perform disc repeat. • Other button operations in this mode are the same as those in DVD PLAYER mode.
280QZ6070KA-00.0_EN.book Page 17 Monday, February 27, 2006 2:12 PM English 7. CAUTIONS ON HANDLING Operation panel/Generalities • The operation panel will operate properly in a temperature range of 0 to 60°C. • Do not allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the set in any way. Doing so may result in damage. • Subjecting the operation panel to shocks may result in breakage, deformation or other damage.
280QZ6070KA-00.0_EN.book Page 18 Monday, February 27, 2006 2:12 PM English Handling Discs Owner’s manual Handling Storage • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters.
280QZ6070KA-00.0_EN.book Page 19 Monday, February 27, 2006 2:12 PM DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc contains either one film or four hours of music. This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Note: • The functions described in the section, “Features”, for example, the recorded language, subtitles, angles, etc. differ with the DVD video disc.
280QZ6070KA-00.0_EN.book Page 20 Monday, February 27, 2006 2:12 PM English Discs Owner’s manual Playable discs Discs that cannot be played back This DVD video player can play the following discs. This DVD video player cannot play back DVDAudio, DVD-RAM, Photo CDs, etc. Playable discs DVD video discs video CDs CD TEXT Audio CDs MP3 ID3 TAG WMA About CD Extra discs Note: • It may also not be possible to play back CDs recorded on a CD-R unit and CD-RW unit.
280QZ6070KA-00.0_EN.book Page 21 Monday, February 27, 2006 2:12 PM • “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. • “iPod” is for legal or rightholder-authorized copying only. Do not steal music. • Windows Media™, and the Windows® logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/ or other countries. MAX667VD 21 Owner’s manual • This product incorporates copyright protection technology that is protected by U.S.
280QZ6070KA-00.0_EN.book Page 22 Monday, February 27, 2006 2:12 PM English 9. OPERATIONS Basic Operations Owner’s manual Note: Be sure to read this chapter referring to the chapter “3. CONTROLS” on page 5. Caution CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Turning on and off the power Note: • Start the engine before using this unit.
280QZ6070KA-00.0_EN.book Page 23 Monday, February 27, 2006 2:12 PM Basic Operations 1. Press the [7] (OPEN/CLOSE) button. The operation panel will be opened or closed. Adjusting the AUDIO 1. Press the [ADJ] button, then touch the [AUDIO] key. Note: • The operation panel will close automatically when leaving it open for a while. • When the operation panel is open, the touch panel cannot be operated.
280QZ6070KA-00.0_EN.book Page 24 Monday, February 27, 2006 2:12 PM Basic Operations English Adjusting the BASS Owner’s manual The bass gain, bass frequency (center frequency) and bass Q can be adjusted as follows. 2-1. Touch the []] key of the BASS item. 3-1. When the AUDIO BASS screen is displayed, touch the [[] or []] key for the desirable type to adjust to a desirable level. GAIN : –6 to 8 (The factory default setting is “0”.) FREQ. : 50Hz, 80Hz, 120Hz (The factory default setting is “50Hz”.
280QZ6070KA-00.0_EN.book Page 25 Monday, February 27, 2006 2:12 PM Basic Operations Note: • The Color and Hue settings can be adjusted only in the DVD video, Video CD, TV/VTR, VISUAL and DVD changer modes, and only when the car is stopped and the parking brake is applied. • The Hue setting can be adjusted only when the NTSC mode is selected. The following warning message is displayed during use of the CCD camera: “Make sure of safety around your vehicle”. 2-1.
280QZ6070KA-00.0_EN.book Page 26 Monday, February 27, 2006 2:12 PM Basic Operations English Owner’s manual Front monitor lock Switching CONNECT (connect) When an external device is connected to the Visual terminal, lock the front monitor to show the visual input source. You can set this function only when the CONNECT item of the GENERAL menu is set to other than “NONE”. 1. Keep pressing the [ADJ] button more than 1 second to set the monitor lock.
280QZ6070KA-00.0_EN.book Page 27 Monday, February 27, 2006 2:12 PM Basic Operations Setting your Personal Code 1. Press the [ADJ] button, then touch the [GENERAL] key. 2. Keep pressing the [CONT.] button more than 2 seconds. The SET PERSONAL CODE screen appears. Note: • When a Personal Code is already set, the ERASE PERSONAL CODE screen will appear. Retry this operation after erasing the old Personal Code. 3.
0QZ6070KA-00.0_EN.book Page 28 Monday, February 27, 2006 2:12 PM Basic Operations English 2-ZONE Function Setting the 2-ZONE function * The factory default setting is “OFF”. About the 2-ZONE function Owner’s manual The 2-ZONE function is a function that outputs separate sounds/images from the MAIN zone and SUB zone (such as the optional rear monitor) by simultaneously operating two sources in the one center unit. Thereby, plural listeners are allowed to enjoy separate audio/ visual sources.
280QZ6070KA-00.0_EN.book Page 29 Monday, February 27, 2006 2:12 PM Basic Operations English Monitor image and sound with 2-ZONE ON/OFF ●With 2-ZONE function OFF Front monitor lock ON Front monitor lock OFF Visual connection [NAVI] (*1) Visual connection [OTHER] (*1) Visual connection [NAVI] (*1) Front monitor (main unit) Displays image of device connected to the Visual terminal. (*3) Displays image of device connected to the Visual terminal. Displays image of mode selected from the Source menu.
280QZ6070KA-00.0_EN.book Page 30 Monday, February 27, 2006 2:12 PM English Radio Operations Listening to the radio Owner’s manual 1. Press the [SRC] button, and touch the [TUNER] key. The TUNER mode screen is displayed. 2. Press the [BAND] button or touch the [Band] key to select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... 3. Press the [R] or [F] button to tune in the previous or next preset station.
280QZ6070KA-00.0_EN.book Page 31 Monday, February 27, 2006 2:12 PM Radio Operations Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. 1. Touch the [Band] key to select the desired band. (FM or AM) 2. Touch the [List] key. 3. Touch and hold the [AS] key for more than 2 seconds.
280QZ6070KA-00.0_EN.book Page 32 Monday, February 27, 2006 2:12 PM English DVD Video Player Operations Changing DVD System Settings Owner’s manual Note: • If the Setup operation is performed in the middle of DVD video play, the disc will restart from beginning. • The settings on the DVD SETUP menu cannot be set with the remote control unit. Selecting the DVD SETUP menu 1. Press the [SRC] button, and touch the [DVD PLAYER] key. The DVD PLAYER mode screen is displayed. 2.
280QZ6070KA-00.0_EN.book Page 33 Monday, February 27, 2006 2:12 PM DVD Video Player Operations 4-2. Touch the key to select a desired language to set it. * The factory default setting is “ENGLISH”. Setting up the audio language 4-1. Touch the []] key of AUDIO LANGUAGE item. The AUDIO LANGUAGE menu is displayed. 4-2. Touch the key to select a desired language to set it. * The factory default setting is “ENGLISH”. Setting up the subtitle language 4-1. Touch the []] key of SUBTITLE LANGUAGE item.
280QZ6070KA-00.0_EN.
280QZ6070KA-00.0_EN.book Page 35 Monday, February 27, 2006 2:12 PM DVD Video Player Operations 4-1. Touch the [[] or []] key of PARENTAL LEVEL item. When you touch the [[] or []] key, PASSWORD input screen is displayed. 4-2. Touch the ten-key (0 to 9) to input a 4-digit password, and touch the [ENT] key. * The factory default setting of the password is “0000”. 4-3. Touch the [[] or []] key to select level 1 to 8, or 0 (no parental). * The factory default setting is “8”.
280QZ6070KA-00.0_EN.book Page 36 Monday, February 27, 2006 2:12 PM DVD Video Player Operations English Pausing play Owner’s manual 1. Press the [p] button or touch the [p] key to pause play. “PAUSE” appears in the display. 2. To resume disc play, press the [p] button again. Ejecting a disc 1. Press the [7] (OPEN/CLOSE) button to open the operation panel. 2. Press the [o] (EJECT) button to eject disc. “EJECT” appears in the display. The play mode then switches to the TUNER mode.
280QZ6070KA-00.0_EN.book Page 37 Monday, February 27, 2006 2:12 PM DVD Video Player Operations 1. Showing the DVD PLAYER mode screen, touch and hold the [p] key for more than 1 second during playback. Playback is stopped. 2. To resume playback, touch the [p] key. Playback resumes from the scene where playback is stopped. * When the Key Pad is displayed, direct operation of the button items is disabled.
280QZ6070KA-00.0_EN.book Page 38 Monday, February 27, 2006 2:12 PM DVD Video Player Operations English Skipping a chapter (searching) Owner’s manual About chapter Chapter means a small segment to divide the data area of the disc. 1. Press the [R] or [F] button during playback. Chapters are skipped, as many as the times the button is pressed, and playback starts. Current location Chapter down Chapter Chapter up • Pressing the [F] button starts playback from the beginning of the next chapter.
280QZ6070KA-00.0_EN.book Page 39 Monday, February 27, 2006 2:12 PM DVD Video Player Operations On discs in which two or more audios or audio languages have been recorded, you can switch among the audio languages during playback. 1. Showing the DVD PLAYER mode screen, touch the [Option] key. 2. Touch the [Audio] key during playback. • Each time you touch the key, you can switch among audio languages. • Depending on the disc, up to 8 audios may be recorded.
280QZ6070KA-00.0_EN.book Page 40 Monday, February 27, 2006 2:12 PM DVD Video Player Operations English Switching angles Owner’s manual On DVD discs in which video images have been recorded in two or more angles, you can switch among the angles during playback. This operation can be performed when the “Setting up the angle mark display” function (see page 32) is set to “ON”. 1. Touch the [ ] (Angle) key during playback. Each time you touch the key, you can switch among angles.
280QZ6070KA-00.0_EN.book Page 41 Monday, February 27, 2006 2:12 PM DVD Video Player Operations This operation allows searching with the track numbers recorded on the video CDs. 1. Touch the screen to display the VIDEO CD mode screen. 2. Touch the [Search] key. 3. Input the track number that you want to play back with [0] to [9] key. 4. Touch the [ENT] key. Playback starts from the scene of the input track number.
280QZ6070KA-00.0_EN.book Page 42 Monday, February 27, 2006 2:12 PM DVD Video Player Operations English Owner’s manual On/Off of Playback Control Skipping a track (searching) On Video CDs equipped with Play Back Control function, you can turn it on/off. 1. Press the [R] or [F] button during playback. Tracks are skipped, as many as the times the button is pressed, and playback starts. • Pressing the [F] button starts playback from the beginning of the next track.
280QZ6070KA-00.0_EN.book Page 43 Monday, February 27, 2006 2:12 PM DVD Video Player Operations Other various play functions 1. Touch the [Option] key. 2. Touch the touch key of the function you want to play. [Track Scan] : track scan playback This operation scans and plays back all tracks recorded on the disc, the first 10 seconds for each. * “T.SCN” is displayed on the screen. [Track Repeat] : track repeat playback This operation plays back tracks recorded on the CD repeatedly. * “T.
280QZ6070KA-00.0_EN.book Page 44 Monday, February 27, 2006 2:12 PM DVD Video Player Operations English Precautions when creating an MP3 disc Owner’s manual ●File extensions 1. Always add a file extension “.MP3” or “.mp3” to an MP3 file, and “.WMA” or “.wma” to a WMA file by using single byte letters. If you add a file extension other than specified or forget to add these file extension, the file cannot be played.
280QZ6070KA-00.0_EN.book Page 45 Monday, February 27, 2006 2:12 PM DVD Video Player Operations Skipping a track (searching) 1. Press the [R] or [F] button during playback. Tracks are skipped, as many as the times the button is pressed, and playback starts. • Press the [F] button starts playback from the beginning of the next track. • Press the [R] button starts playback from the beginning of the current track.
280QZ6070KA-00.0_EN.book Page 46 Monday, February 27, 2006 2:12 PM DVD Video Player Operations English Displaying CD titles 1. Touch the [Option] key. 1. Touch the [Title] key. 2. Touch the [X] key of the Folder, Track, Album, Artist or Title item to cause the respective display to scroll once. Owner’s manual Other various play functions 2. Touch the touch key of the function you want to play.
280QZ6070KA-00.0_EN.book Page 47 Monday, February 27, 2006 2:12 PM Title list play Titles up to 10 characters long can be stored in memory and displayed for Radio stations, CD, TV stations, and CDs in the CD changer. The numbers of titles that can be entered for each mode are as follows. You can display a list of titles, then select the CD track, disc or broadcast station to listen to from that list.
280QZ6070KA-00.0_EN.book Page 48 Monday, February 27, 2006 2:12 PM Other Functions English Owner’s manual Changing over monitor display size Internal amplifier cancel function Note: • This function is not available while you are driving. • Switch to the DVD PLAYER (DVD video or video CD)/VISUAL/DVD changer/TV mode you see. This function is used to disable the internal amplifier when an external amplifier is connected. 1. Touch the screen to display the mode menu, then touch “Display size” key ([F.
280QZ6070KA-00.0_EN.book Page 49 Monday, February 27, 2006 2:12 PM English 10.OPERATIONS OF ACCESSORIES iPod Operations Note: • Note that iPod versions higher than those noted above may not be playable. • The unit will not operate, or may operate improperly with unsupported versions. • First and second generation iPod and iPod shuffle cannot be used. Controlling the iPod ●Selecting the iPod mode 1. Connect the iPod to the connector. 2. Press the [iPod] button.
280QZ6070KA-00.0_EN.book Page 50 Monday, February 27, 2006 2:12 PM iPod Operations English Owner’s manual Note: • The title display (*) shows, from top level down, the SONG title, ARTIST name, and ALBUM title. Press the operation display to scroll the SONG title. ●Operation display Play/Pause icon(p) display Track No.
280QZ6070KA-00.0_EN.book Page 51 Monday, February 27, 2006 2:12 PM iPod Operations TOP function The TOP function resets the player to play the first track of the tracks. 1. Press the [BAND] button to play back the first track of the current list. * To play back all of the tracks in the Songs list from the first track, keep pressing the [BAND] button more than 1 second. Selecting a list item from a list screen 1.
280QZ6070KA-00.0_EN.book Page 52 Monday, February 27, 2006 2:12 PM English VISUAL Operations This function is available when a VTR, etc. is connected to the visual terminal. WARNING Owner’s manual For your safety, the driver should not watch the VTR, etc. or operate the controls while driving. Please note that watching and operating the VTR, etc. while driving are prohibited by law in some countries.
280QZ6070KA-00.0_EN.book Page 53 Monday, February 27, 2006 2:12 PM CD Changer Operations English Switching to a next disc (Disc Up function) Other various play functions 1. Touch the [Option] key. Owner’s manual The disc up function plays from the first track (track No.1) of the next disc. 1. Press the [BAND] button. The disc changes to the next disc. Searching with a track number * This function is available only for the current disc. 1. Touch the [Search] key. 2.
280QZ6070KA-00.0_EN.book Page 54 Monday, February 27, 2006 2:12 PM English DVD Changer Operations Owner’s manual Only basic operations of DVD changer can be performed from the unit. Use the remote control unit to perform the following functions. • Scan, Repeat, Random functions • Video CD Playback function ON/OFF • DVD Setup function, Audio, Subtitle, Angle setting function For details on operations other than those described below, see the pages of “DVD Video Player Operations”.
280QZ6070KA-00.0_EN.book Page 55 Monday, February 27, 2006 2:12 PM TV Operations A total of 12 TV stations can be stored (6-TV1 and 6-TV2). There are 2 ways available to recall the preset station. ●Using the [R] or [F] button 1. Press the [BAND] button or touch the [Band] key to select the desired TV band. (TV1 or TV2) 2. Press the [R] or [F] button to recall a stored TV station. ●Using the Preset List screen 1. Touch the screen to display the menu, then touch the [List] key. 2.
280QZ6070KA-00.0_EN.book Page 56 Monday, February 27, 2006 2:12 PM TV Operations English Owner’s manual Auto store Setting the TV area Auto store selects 6 TV stations automatically and stores each one into a preset memory. If 6 stations cannot be received with good reception, previously stored station remain and only the strong stations are stored into memory. 1. Touch the [Band] key to select the desired TV band. (TV1 or TV2) 2. Touch the [List] key. 3.
280QZ6070KA-00.0_EN.book Page 57 Monday, February 27, 2006 2:12 PM 5.1 ch Surround Decoder control function This section describes operation procedures of setting functions. For details on each function, refer to the owner’s manual supplied with the 5.1 ch Surround Decoder. * Requires an optional amplifier. Note: • The 2-ZONE mode is disabled when the DVH940 is connected. 1. Press the [ADJ] button to display the ADJUST menu.
280QZ6070KA-00.0_EN.book Page 58 Monday, February 27, 2006 2:12 PM 5.1 ch Surround Decoder Operations English ●FILTER This function is used to select filter frequencies that suit the speakers that are used. Owner’s manual * This function is not available for speakers whose SPEAKER SEL setting is set to “OFF”. 3-1. Touch the []] key of the FILTER item to show the submenu. 3-2. Touch the [[] or []] key of the FRONT HPF, CENTER HPF, SURROUND HPF or SUB WOOFER LPF item to adjust.
280QZ6070KA-00.0_EN.book Page 59 Monday, February 27, 2006 2:12 PM 5.1 ch Surround Decoder Operations DSF effect ON/OFF 1. Press the [ADJ] button, and touch the [AUDIO] key. 1. Press the [ADJ] button, and touch the [AUDIO] key. 2. Touch the []] key of the P.EQ item to display the submenu. 3. Touch the key for the desirable type to select. The P.EQ adjustment contents are as follows: [SIGNAL]: This function selects “MUSIC” or “P. NOISE”. * The factory default setting is “P.NOISE”.
280QZ6070KA-00.0_EN.book Page 60 Monday, February 27, 2006 2:12 PM 5.1 ch Surround Decoder Operations English Selecting the Dolby PL II (Dolby Pro Logic II ) type Owner’s manual * The factory default setting is “OFF”. * This setting is disabled when both the CENTER SP and SURROUND SP items of the SPEAKER SEL setting are set to “OFF”. 1. Press the [ADJ] button, and touch the [AUDIO] key. 2. Touch the []] key of the Dolby PL II item. 3. Touch the key for the desirable type to select. 4.
280QZ6070KA-00.0_EN.book Page 61 Monday, February 27, 2006 2:12 PM English 11.IN CASE OF DIFFICULTY GENERAL Cause Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power and open the operation panel. Press the [RESET] button for about 2 seconds with a thin rod.
280QZ6070KA-00.0_EN.book Page 62 Monday, February 27, 2006 2:12 PM TV/VTR (When connecting an optional TV tuner, etc.) English Problem Cause Measure The parking brake is not engaged. Check that the parking brake is engaged. The display is dark. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0°C or lower. Set to an appropriate temperature (25°C or so) and check it again.
280QZ6070KA-00.0_EN.book Page 63 Monday, February 27, 2006 2:12 PM English 12.ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem. Owner’s manual DVD Player Display Cause Measure ERROR 2 A disc is caught inside the This is a failure of DVD deck’s mechanism and CD deck and is not ejected. consult your store of purchase. ERROR 3 A disc cannot be played due to scratches, etc.
280QZ6070KA-00.0_EN.book Page 64 Monday, February 27, 2006 2:12 PM LCD Monitor Frequency Range: 87.00 MHz to 108.00 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 32 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Screen Size: 7-inch wide type 156.2 mm Width × 82.
280QZ6070KA-00.0_EN.book Page 65 Monday, February 27, 2006 2:12 PM English INSTALLATION AND WIRE CONNECTION MANUAL INSTALLATION AND WIRE CONNECTION MANUAL 1. BEFORE STARTING 1. This set is exclusively for use in cars with a negative ground 12 V power supply. 2. Read these instructions carefully. 3. Be sure to disconnect the battery “-” terminal before starting. This is to prevent short circuits during installation. (Figure 1) Car battery Figure 1 2.
280QZ6070KA-00.0_EN.book Page 66 Monday, February 27, 2006 2:12 PM English 4. CAUTIONS ON INSTALLATION INSTALLATION AND WIRE CONNECTION MANUAL 1. Prepare all articles necessary for installing the main unit before starting. 2. This model features an operation panel that slides forward. On some types of cars, the operation panel may make contact with the dashboard or shift lever, in which cause it cannot be installed.
280QZ6070KA-00.0_EN.book Page 67 Monday, February 27, 2006 2:12 PM 3. Reassemble and secure the unit in the dashboard and set the face panel and center panel. INSTALLATION AND WIRE CONNECTION MANUAL This unit is designed for fixed installation in the dashboard. 1. When installing the main unit in NISSAN vehicles, use the parts attached to the unit and follow the instructions in Figure 6.
280QZ6070KA-00.0_EN.book Page 68 Monday, February 27, 2006 2:12 PM Installing the Main Unit in a TOYOTA Vehicle English Install by using parts attached to the vehicle. (Screws marked ★ are attached to the vehicle.) INSTALLATION AND WIRE CONNECTION MANUAL Main Unit 8–Hexagonal screw (M5 × 8) Center Panel (* 2) Mounting bracket (1 pair for the left and right sides) *3 Figure 7 Note: * 2 Some panel openings are too small for the unit depending on the vehicle type and model.
280QZ6070KA-00.0_EN.book Page 69 Monday, February 27, 2006 2:12 PM 5. Connect the CeNET extension cable fully and securely until it locks. When the CeNET extension cable is pulled, hold the slide cap part and pull it towards you. (Figure 9) * When the CeNET extension cable is extended or branches, use extension cable CCA-520 (2.5 m) or CCA-521 (0.6 m), or Y-adapter CCA-519 (each of them is sold separately).
280QZ6070KA-00.0_EN.book Page 70 Monday, February 27, 2006 2:12 PM English 7. WIRE CONNECTION Note: • Before installing, be sure to disconnect the negative cable of the car battery. • In the optional devices, the RCA Pin and the Connector cable are separately-sold items.
280QZ6070KA-00.0_EN.
280QZ6070KA-00.0_EN.book Page 72 Monday, February 27, 2006 2:12 PM Connecting the Accessories English ●Connection to the external amplifier The external amplifier can be connected unless the 5.1 ch Surround Decoder is connected. For detailed information, refer to the instruction manual of the 5.1 ch Surround Decoder. INSTALLATION AND WIRE CONNECTION MANUAL ●Connection to the CCD camera for vehicle The CCD camera for vehicle can be connected to CCD terminal on the main unit.
280QZ6070KA-00.0_EN.book Page 73 Monday, February 27, 2006 2:12 PM English 8.
280QZ6070KA-00.0_EN.
Owner’s manual & Installation manual DVD MULTIMEDIA STATION WITH TOUCH PANEL CONTROL Clarion Co., Ltd. All Rights Reserved.Copyright © 2006: Clarion Co., Ltd.
