Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Benutzerhandbuch & Installationshandbuch Manuale dell’utente e manuale di installazione Gebruikershandleiding en installatiehandleiding Manual de instrucciones y de instalación Ägar- & installationshandbok Manual do utilizador e manual de instalação Betjeningsvejledning og installationsvejledning MAX678RVD 2-DIN DVD MULTIMEDIA STATION WITH CeNET & 7-inch TOUCH PANEL CONTROL STATION MULTIMEDIA DVD 2 DIN AVEC COMMANDE PAR ECRAN TACTI
CAUTIONS: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AUTHORIZED service station”. To prevent direct exposure to the laser beam, do not try to open the enclosure.
Turning the power on & (POWER) System check The CeNET format utilized on this unit is provided with a system check function. When the system check function is performed under the following conditions, the power is automatically turned off. Press the [&] (POWER) button again. •When power is first turned on after initial installation. •When an external device is connected or disconnected. •When Reset button is pressed. ∗In addition to the above conditions, the or ∗2 1.
Deutsch [ ] (POWER) [ ] (OPEN/CLOSE) Italiano Sensor [TA] [ADJ] Nederlands Blink LED [VOICE] Español [SRC] [MAP] [BAND] [MENU] ● With the operation panel open / Avec le panneau de commande ouvert / Bei geöffnetem Bedienfeld / Con il pannello operativo aperto / Met het bedieningspaneel open / Con el panel de funcionamiento abierto / Med pekskärmen öppen / Com o painel de operação aberto / Med betjeningspanelet åbent Svenska [RESET] Português Dansk Note : Be sure to unfold this page and refer t
English Outline of Button and Touchkey Operation TUNER mode operation Owner’s manual (Source menu) (Option Menu) (Preset List screen) (PTY Preset List screen) •Selects desired station. (PTY Item List screen) Note: ∗1:These images indicate the buttons to press or keys to touch. ∗2:External equipment not connected with CeNET is not displayed.
English Outline of Button and Touchkey Operation DVD Video mode operation Owner’s manual (DVD PLAYER mode screen)∗3 (Source menu) ∗Screen during DVD mode when motorcar moving. (Option menu) (DVD SETUP menu) Note: ∗3:When displaying movies in DVD video mode, touching the screen surface will cause the DVD PLAYER mode screen to be displayed.
English Outline of Button and Touchkey Operation Adjusting audio feature settings ●When no surround decoder is connected Owner’s manual (ADJUST mode menu) (AUDIO menu) (AUDIO EXT.
English Outline of Button and Touchkey Operation ●When the 5.1 ch Surround Decoder is connected Owner’s manual (ADJUST mode menu) (AUDIO menu) (AUDIO EXT.
English Outline of Button and Touchkey Operation Adjusting the other system settings Owner’s manual (ADJUST mode menu) (GENERAL menu) (MONITOR menu) (MONITOR ADJ) (Monitor Adjust screen) (WALL COLOR) (WALL COLOR screen) Bright Color Hue Dimmer ∗Switched by touching this key repeatedly. (“Hue” is not displayed when displaying PAL images.
English Remote Control Remote control unit Owner’s manual Signal transmitter Operating range: 30˚ in all directions [BAND] [MUTE] [SRC] [VOLUME] [P.TIME] [0-9] [DISC SEL] [ ],[ ] [SEARCH MODE] [MENU] [RTN] [TOP MENU] [SET UP] [ENT] [ ],[ ] [TA] [2-ZONE] [RPT] [SCN] [PBC] [RDM] [AUDIO] [SLOW] [ANGLE] [SUB TITLE] Inserting the Batteries 1. Slide the rear cover in the direction of the arrow, and remove it. 2. Insert the AA (SUM-3, IECR-6/1.
You can use the remote control unit to control the MAX678RVD. When the 2-ZONE function is ON, the controls work upon the selected zone. Shared modes [SRC] button • Press this button to switch the modes such as TUNER mode, DVD PLAYER mode. [VOLUME] buttons • Increase and decrease volume. [MUTE] button • Turns mute on and off. [RTN] button • Returns to the previous screen from the list or menu screens. • Displays the menu screen when playing a Video CD.
English Functions of Remote Control Unit Buttons [MENU] button • Press to display menu stored on video disc. Owner’s manual [SET UP] button • Press to show the DVD SETUP menu screen during DVD video playback. [TOP MENU] button • Press to display the Top Menu screen stored on DVD video disc. Some discs do not display the top menu screen. [E], [e], [T], [t] buttons • Press to select button items on the menu screen of a DVD video.
English Functions of Remote Control Unit Buttons Owner’s manual [RPT] button • Press to perform track repeat. • Keep pressing more than 1 second to perform disc repeat. [RDM] button • Press to play tracks of all discs at random. • Keep pressing more than 1 second to play folders of all discs at random. When SUB zone is selected SUB zone operations are supported, but button functions are limited as follows: Shared modes [VOLUME] buttons • Controls sound volume for MAIN zone source.
English 4. CAUTIONS ON HANDLING Owner’s manual Operation panel/Generalities For a longer service life, be sure to read the following cautions. • The operation panel will operate properly in a temperature range of 0 to 60qC. • Do not allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the set in any way. Doing so may result in damage.
English Handling Discs Storage • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters.
English 5. DVD VIDEO SYSTEM Owner’s manual DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc contains either one film or four hours of music. DVD Video Features This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Note: • The functions described in this section, for example, the recorded language, subtitles, angles, etc. differ depending on the DVD video disc.
English Discs Discs that cannot be played back This DVD video player can play the following discs. This DVD video player cannot play back DVDAudio, DVD-RAM, Photo CDs, etc. Playable discs DVD video discs video CDs CD TEXT Audio CDs MP3 ID3 TAG WMA About CD Extra discs Note: • It may also not be possible to play back CDs recorded on a CD-R unit and CD-RW unit. (Cause: disc characteristics, cracks, dust/dirt, dust/dirt on player’s lens, etc.
English 6. OPERATIONS Owner’s manual Basic Operations Note: • Be sure to read this chapter referring to the chapter “2. CONTROLS” (page 5). CAUTION CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Turning on and off the power Note: • Start the engine before using this unit. • Be careful about using this unit for a long time without running the engine.
English Basic Operations Opening/closing the operation panel Adjusting the AUDIO Note: • When the optional 5.1 ch Surround Decoder (DVH943N) is used, the following tone adjustments cannot be made. To adjust the tone, refer to the section “5.1 ch Surround Decoder Operations” (page 64). 1. Press the [ADJ] button, then touch the [AUDIO] key. Note: • The operation panel will close automatically when leaving it open for a while. • When the operation panel is open, the touch panel cannot be operated.
English Basic Operations Adjusting the BASS Owner’s manual The bass gain, bass frequency (centre frequency) and bass Q can be adjusted as follows. 2-1. Touch the []] key of the BASS item. 3-1. When the AUDIO BASS screen is displayed, touch the [[] or []] key for the desirable type to adjust to a desirable level. GAIN: –6 to 8 (The factory default setting is “0”.) FREQ.: 50Hz, 80Hz, 120Hz (The factory default setting is “50Hz”.) Q: 1, 1.25, 1.5, 2 (The factory default setting is “1”.
Changing the colour of the title and command bars in the screen * This screen can also be displayed directly by pressing and holding the [ADJ] button for more than 1 second. 2-2. Touch the [Auto], [Day] or [Night] key to set the colour mode (The factory default setting is “Auto”). “Auto”: The colour is changed according to the status of the car light: When the car light is off: light grey colour When the car light is on: dark grey colour “Day”: Set to the light grey colour.
English Basic Operations Turning on/off the motion of the background picture Owner’s manual 2-1. Touch the [ON] or [OFF] key of the MOTION item to set the function (The factory default setting is “ON”). Front monitor lock When an external device is connected to the Visual terminal, lock the front monitor to show the visual input source. Note: • This function is enabled only when the CONNECT item of the GENERAL menu is set to other than “NONE”. 1. Press the [MAP] button to set the monitor lock.
English Basic Operations Switching CONNECT (connect) When you connect your mobile phone to this unit using a separately sold cable, you can listen to your telephone calls on your car speakers. • The factory default setting is “OFF”. Make the following settings when an external device is connected to the Visual terminal. 3-1. Touch the []] key to display the next menu screen. 3-2. Touch the [ON], [OFF] or [MUTE] key of the TEL SWITCH item to set to “ON”, “OFF” or “MUTE”.
English Basic Operations Setting the anti-theft function (CATS) Owner’s manual “CATS” is the acronym of “Clarion Anti-Theft System”. When you set a PIN code (called as “Personal Code”), a theft is prevented by disabling the operation of the unit at the theft. In addition, set the BLINK LED function in the GENERAL menu to [ON] to improve the effect of the CATS function (see page 26). Setting your Personal Code 1. Press the [ADJ] button, then touch the [GENERAL] key. 2.
English Basic Operations 2-ZONE Function Setting the 2-ZONE function • The factory default setting is “OFF”. The 2-ZONE function is a function that outputs separate sounds/images from the MAIN zone and SUB zone (such as the optional rear monitor) by simultaneously operating two sources in the one centre unit. Thereby, plural listeners are allowed to enjoy separate audio/visual sources.
English Basic Operations Monitor image and sound with 2-ZONE ON/OFF ●With 2-ZONE function OFF Owner’s manual Front monitor lock ON Front monitor lock OFF Visual connection [RGB]/ [COMPOSITE] (*1) Visual connection [OTHERS] (*1) Visual connection [RGB]/ [COMPOSITE] (*1) Visual connection [OTHERS] (*1) Front monitor (main unit) Displays image of device connected to the Visual terminal. (*3) Displays image of device connected to the Visual terminal.
Listening to the radio ●LOCAL SEEK If you keep touching the [X] or [x] key more than 1 second, the Local Seek tuning is carried out. The broadcast stations with good reception sensitivity are automatically selected. • When the Local Seek tuning starts, “LO SEEK” appears on the screen. Manual tuning 2. Press the [BAND] button or touch the [Band] key to select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1... 3.
English Radio Operations Owner’s manual Recalling a preset station Manual memory There are total of 24 preset positions (6-FM1, 6FM2, 6-FM3, 6-AM (MW/LW)) to store individual radio stations in memory. There are 2 ways available to recall the preset station. ●Using the [R] or [F] button 1. Press the [BAND] button to select the desired band (FM or AM (MW/LW)). 2. Press the [R] or [F] button to recall the previous or next stored station. ●Using the Preset List screen 1. Touch the [List] key. 1.
English RDS Operations AF function This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received (PS), and can automatically switch to the broadcast station with the best reception as you move long distances (AF switching). Also, if a traffic announcement or programme type information is broadcast from an RDS station, no matter what mode you are in, this broadcast is received.
English RDS Operations Manually tuning a regional station in the same network Owner’s manual Note: • This function can be used when a regional broadcast of the same network is received. • This function is enabled only when the AF function is ON, and the REG function is OFF. 1. Touch the [List] key on the RDS mode screen. 2. Touch your desired Preset key to call out a regional station. 3. Each time you touch the same Preset key, this unit switches from a local station to the other on the same network.
Preset number PTY item ENGLISH Contents 1 News News 2 Info Information 3. Touch your desired Programme Type key to select. 4. Touch the [Preset] key to display the Preset screen. Keep touching your desired Preset key on the Preset screen more than 2 seconds to store the selected programme type into the preset channel memory. • The 29 types of PTY listed below can be selected.
English RDS Operations Emergency broadcast Owner’s manual If an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears on the screen and the emergency broadcast can be heard. ●Cancelling an emergency broadcast 1. Touch the [Option] key on the RDS mode screen to display the RDS menu. 2. Touch the [OFF] key of the AF item. The emergency broadcast reception is cancelled.
English DVD Video Player Operations Note: • If the Setup operation is performed in the middle of DVD video play, the disc will restart from beginning. • The settings on the DVD SETUP menu cannot be set with the remote control unit. Selecting the DVD SETUP menu 1. Press the [SRC] button, and touch the [DVD PLAYER] key. The DVD PLAYER mode screen is displayed. 2. Touch the [Option] key to display the Option menu. 3. Touch the [Setup] key to display the DVD SETUP menu.
English DVD Video Player Operations Setting up the disc menu language Owner’s manual 4-1. Touch the []] key of MENU LANGUAGE item. The MENU LANGUAGE menu is displayed. 4-2. Touch the key to select a desired language to set it. • The factory default setting is “ENGLISH”. Setting up the audio language 4-1. Touch the []] key of AUDIO LANGUAGE item. The AUDIO LANGUAGE menu is displayed. 4-2. Touch the key to select a desired language to set it. • The factory default setting is “ENGLISH”.
Country LEBANON Input code 7666 7683 LIECHTENSTEIN 7673 LUXEMBOURG 7685 MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF 7775 MALTA 7784 MONACO 7767 NETHERLANDS 7876 (NETHERLANDS ANTILLES) 6578 NORWAY 7879 OMAN 7977 POLAND 8076 PORTUGAL 8084 QATAR 8165 You can change the level of parental lock (audiovisual restriction). This function allows cutting scenes that are unfavourable for children or replacing them automatically with other scenes prepared in advance.
English DVD Video Player Operations Owner’s manual Basic Operations Pausing play Loading a disc 1. Press the [p] button or touch the [p] key to pause play. “PAUSE” appears in the display. 2. To resume disc play, press the [p] button again. 1. Press the [7] (OPEN/CLOSE) button to open the operation panel. 2. Insert a disc into the centre of the insertion slot with the label side facing up. The disc plays automatically after loading. Note: • Never insert foreign objects into the disc insertion slot.
Operating the DVD menu Watching a DVD-Video You can select the button items displayed in the DVD menu by directly touching it. If the button items are hard to select correctly, you can also operate them by displaying Key Pad on the screen. After disc loading, the play mode is automatically engaged. • When playback is not started, press the [p] button or touch the [p] key. • Button operation may differ depending on the story of the disc.
English DVD Video Player Operations Owner’s manual Stopping playback Skipping a chapter (searching) 1. Showing the DVD PLAYER mode screen, touch and hold the [p] key for more than 1 second during playback. Playback is stopped. 2. To resume playback, press the [p] button. Playback resumes from the scene where playback is stopped. ●About chapter Chapter means a small segment to divide the data area of the disc. 1. Press the [R] or [F] button during playback.
Searching with a chapter/title number * If the input title/chapter number does not exist or searching with a title/chapter number is not allowed, the screen image will not change. 4. Touch the [Back] key. Scan playback Scans and plays back all chapters recorded on the DVD-Video, the first 10 seconds for each. 1. Showing the DVD PLAYER mode screen, touch the [Option] key. 2. Touch the [Chapter Scan] key, then touch the [Back] key. The message “C.SCN” will be displayed.
English DVD Video Player Operations Owner’s manual Switching among languages Switching angles On discs in which two or more audios or audio languages have been recorded, you can switch among the audio languages during playback. 1. Showing the DVD PLAYER mode screen, touch the [Option] key. 2. Touch the [Audio] key during playback. • Each time you touch the key, you can switch among audio languages. • It may take time to switch among audios.
Watching a video CD Note: • There are two types of Video CDs, and these differ in some operations and functions. For the operations and functions of a Video CD, see the documents attached to the Video CD. Showing the V-CD menu (for Video CD discs with PBC) * This key does not function on some discs. 1. Touch the screen to display the VIDEO CD mode screen, then touch the [Menu] key during playback. The Video CD menu appears. * The displayed contents may differ, depending on the Video CD software. 2.
English DVD Video Player Operations Searching with a track number Owner’s manual This operation allows searching with the track numbers recorded on the video CDs. 1. Touch the screen to display the VIDEO CD mode screen. 2. Touch the [Search] key. 3. Input the track number that you want to play back with [0] to [9] key. 4. Touch the [ENT] key. Playback starts from the scene of the input track number.
English DVD Video Player Operations Other various play functions 1. Press and hold the [R] or [F] button during playback. The playback speed becomes 5-time faster first and then 20-time faster 3 seconds later. Releasing the button resumes the normal speed playback. 1. Touch the [Option] key. Owner’s manual Fast forward and fast backward Searching with a track number This operation allows searching using the track numbers recorded on the CDs. 1. Touch the [Search] key. 2.
English DVD Video Player Operations Listening to an MP3/WMA Owner’s manual This unit is an ID3 Tag compatible model. This unit supports the ID3 TAGs of the Version 2.4, 2.3, 1.1 and 1.0. In displaying, this unit gives priority to the Version 2.3 and 2.4 TAGs. After disc loading, the play mode is automatically engaged. What is MP3/WMA? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. WMA is an audio compression method developed by Microsoft Corporation.
Skipping the current folder Up to 8 folder levels (including the root directory) can be created for MP3/WMA files (items 1 – in the illustration). However, on this unit, folders created above the third level will be converted to 2 levels. 1. Press the [BAND] button during playback. The tracks of the current folder are skipped and playback starts from the first track of the next folder. Selecting a folder/track on the LIST screen 1 2 1 3 4 2 4 3 Pausing playback 1.
English DVD Video Player Operations Other various play functions 1. Touch the [Option] key. Owner’s manual 2. Touch the touch key of the function you want to play. [Track Scan]: track scan playback This operation scans and plays back all tracks recorded on the disc, the first 10 seconds for each. • “T.SCN” is displayed on the screen. [Folder Scan]: folder scan playback This operation plays back the first tracks of all folder on the MP3/WMA disc, the first 10 seconds for each. • “F.
English Other Functions Title list play Titles up to 10 characters long can be stored in memory and displayed for CD, TV stations, and CDs in the CD changer. The numbers of titles that can be entered for each mode are as follows. You can display a list of titles, then select the CD track, disc or broadcast station to listen to from that list.
English Other Functions Owner’s manual Changing over monitor display size Internal amplifier cancel function • The factory default setting is “[F.WIDE]”. This function is used to disable the internal amplifier when an external amplifier is connected. • The factory default setting is “OFF”. 1. Press the [ADJ] button. 2. Touch the [AUDIO EXT.] key. 3. Touch the [ON] or [OFF] of the AMP CANCEL item to turn the internal amplifier on or off. 4. Touch the [Back] key to return to the previous screen.
English 7. ACCESSORIES This unit can be used to control a connected Apple iPod (iPod Mini, fourth generation, iPod nano, iPod with video). Note: • Note that iPod versions higher than those noted above may not be playable. • The unit will not operate, or may operate improperly with unsupported versions. • First, second and third generation iPod and iPod shuffle cannot be used. Controlling the iPod ●Selecting the iPod mode 1. Connect the iPod to the connector. 2. Touch the [iPod] key on the Source menu.
English iPod Operations Owner’s manual Note: • The title display (*) shows, from top level down, the SONG title, ARTIST name, and ALBUM title. Press the operation display to scroll the SONG title. ●Operation display Play/Pause icon(p) display Track No. Clock time Play mode (*1) Song title/ Artist name/ Album title (*2) Progress/ Volume indicator Play time Remaining time Note: *1 Displays status of Repeat, Shuffle play.
Viewing video data in the iPod (only for the iPod with video features) TOP function The TOP function resets the player to play the first track of the tracks. 1. Press the [BAND] button to play back the first track of the current list. Note: • Do not connect the iPod to this unit when a Video Playlists item is selected on the iPod. * To play back all of the tracks in the Songs list from the first track, keep pressing the [BAND] button more than 1 second. Selecting a list item from a list screen 1.
English VISUAL Operations This function is available when a VTR, etc. is connected to the visual terminal. Owner’s manual WARNING For your safety, the driver should not watch the VTR, etc. or operate the controls while driving. Please note that watching and operating the VTR, etc. while driving are prohibited by law in some countries.
English CD Changer Operations Switching to a next disc (Disc Up function) Other various play functions 1. Touch the [Option] key. Owner’s manual The disc up function plays from the first track (track No.1) of the next disc. 1. Press the [BAND] button. The disc changes to the next disc. Searching with a track number * This function is available only for the current disc. 1. Touch the [Search] key. 2. Input the track number that you want to play back with [0] to [9] key. 3. Touch the [ENT] key.
English TV Operations Owner’s manual TV functions Manual tuning To watch TV, requires a TV tuner. When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the channel changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BAND] button or touch the [Band] key to select the desired band.
Setting the TV diver 1. Touch the [Band] key to select the desired TV band. (TV1 or TV2) 2. Tune in the desired TV station to be stored. 3. Touch the [List] key. 4. Touch and hold one of the Preset key for more than 2 seconds to store the current station into the preset memory. You can change the reception setting for the TV antenna connected to the TV tuner. Auto store Auto store selects 6 TV stations automatically and stores each one into a preset memory.
English Digital Radio/DAB Operations Owner’s manual About DAB programmes Seek tuning The DAB (Digital Audio Broadcasting) system transmits several programmes on one frequency simultaneously, by compressing audio signals. • A DAB station has multiple programmes on one frequency. • The group of programmes, which is transmitted on a single frequency is called “ensemble”. • Some DAB stations have several ensembles and broadcast diversified programmes.
Storing a programme to preset memory PTY This function enables you to listen to the selected programme type, regardless of the function mode. • DAB and RDS have the same PTY. • You can select one PTY from DAB or RDS. • PTY broadcast are not yet available in all countries. • In the information standby mode, INFO stations have priority over PTY stations. • In the TA standby mode, TP stations have priority over PTY stations.
English NAVI Operations (NAX973HD/NAX963HD, etc.) Owner’s manual NAVI functions NAVI operation Note: • Hereafter in this section, the Navigation system will be called as “NAVI”. • When the Clarion NAVI NAX963HD is connected, the following functions are available: Changes between the NAVI display and the Audio/Visual (hereinafter, refered as “AV”) display.
English NAVI Operations (NAX973HD/NAX963HD, etc.) [MENU] button • When in the NAVI mode, the MENU screen of the NAVI mode is displayed. Owner’s manual Connecting Other Company’s Image Equipment The RGB type or composite type images from the other company’s equipment can be displayed on this unit. Be sure to perform this setting after connecting the RGB type or composite type image equipment to the RGB terminal. 1. Press the [ADJ] button, and touch the [GENERAL] key. 2.
English 5.1 ch Surround Decoder Operations Owner’s manual This function is available when an optional 5.1 ch Surround Decoder (DVH943N) is connected. When the 5.1 ch Surround Decoder is connected through the CeNET cable, the 5.1 ch Surround Decoder Control unit (DVC923, optional) cannot be used. ●SPEAKER SEL (speaker selection) This function determines centre speaker, surround speaker and subwoofer connection. 3-1. Touch the []] key of the SPEAKER SEL item to show the submenu.
* This function is not available for speakers whose SPEAKER SEL setting is set to “OFF”. 3-1. Touch the []] key of the FILTER item to show the submenu. 3-2. Touch the [[] or []] key of the FRONT HPF, CENTER HPF, SURROUND HPF or SUBWOOFER LPF item to adjust. [FRONT HPF]: This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THRGH (through). “THRGH” is the default value. [CENTER HPF]: This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz.
English 5.1 ch Surround Decoder Operations DSF mode Owner’s manual DSF effect ON/OFF • The factory default setting is “OFF”. 1. Press the [ADJ] button, and touch the [AUDIO] key. 2. Touch the []] key of the STATUS item. 3. Touch the [ON] or [OFF] key of the DSF item to turn the function ON or OFF. 4. Touch the [Back] key to return to the previous screen. Note: • If the DSF effect is set to OFF, the adjustment made in “DSF” is not reflected in the music source. Selecting the DSF type 1.
English 5.1 ch Surround Decoder Operations Selecting the Dolby PLII (Dolby Pro Logic II) type * This setting is disabled when both the CENTER SP and SURROUND SP items of the SPEAKER SEL setting are set to “OFF”. 1. Press the [ADJ] button, and touch the [AUDIO] key. 2. Touch the []] key of the Dolby PLII item. 3. Touch the key for the desirable type to select. 4. Touch the [Back] key to return to the previous screen. 3-1. Touch the []] key of the BAL/FAD item.
English 8. TROUBLESHOOTING Owner’s manual GENERAL Problem Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power and open the operation panel. Press the reset button with a thin rod. Display is not accurate.
English TV/VTR (When connecting an optional TV tuner, etc.) Problem Cause Measure The parking brake is not engaged. Check that the parking brake is engaged. The display is dark. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0qC or lower. Set to an appropriate temperature (25qC or so) and check it again. The headlight of the vehicle The display is made dark at night to prevent the is lit.
English 9. ERROR DISPLAYS Owner’s manual If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem. DVD Player Display Cause Measure ERROR 2 A disc is caught inside the This is a failure of DVD deck’s mechanism and CD deck and is not ejected. consult your store of purchase. ERROR 3 A disc cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc.
English 10.SPECIFICATIONS LCD Monitor Frequency Range: 87.50 MHz to 108.00 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 32 dB Frequency Response (r3 dB): 30 Hz to 15 kHz Screen Size: 7-inch wide type 156.2 mm Width u 82.
English INSTALLATION AND WIRE CONNECTION MANUAL INSTALLATION MANUAL 1. BEFORE STARTING 1. This set is exclusively for use in cars with a negative earth 12 V power supply. 2. Read these instructions carefully. 3. Be sure to disconnect the battery “-” terminal before starting. This is to prevent short circuits during installation. (Figure 1) Car battery Figure 1 2.
Dashboard 5. Use the included screws for installation. Using other screws can cause damage. (Figure 4) Chassis Chassis INSTALLATION MANUAL 1. Prepare all articles necessary for installing the main unit before starting. 2. This model features an operation panel that slides forward. On some types of cars, the operation panel may make contact with the dashboard or gear lever, in which cause it cannot be installed.
English 5. INSTALLING THE MAIN UNIT INSTALLATION MANUAL This unit is designed for fixed installation in the dashboard. 1. When installing the main unit in NISSAN vehicles, use the parts attached to the unit and follow the instructions in Figure 6. When installing the main unit in TOYOTA vehicles, use the parts attached to the vehicle and follow the instructions in Figure 7. 2. Wire as shown in Section 7 (see page 77). 3.
English Installing the Main Unit in a TOYOTA Vehicle Install by using parts attached to the vehicle. (Screws marked ★ are attached to the vehicle.) INSTALLATION MANUAL Main Unit 8-Hexagonal screw (M5 × 8) Centre Panel (* 2) Mounting bracket (1 pair for the left and right sides) *3 Figure 7 Note: *2: Some panel openings are too small for the unit depending on the vehicle type and model. In such a case, trim the upper and lower sides of the panel frame by about 0.5 to 1.
English 6. CAUTIONS ON WIRING INSTALLATION MANUAL 1. Be sure to turn the power off before wiring. 2. Be particularly careful where you route the wires. Keep them well away from the engine, and exhaust pipe, etc. Heat may damage the wires. 3. If the fuse should blow, check to see if the wiring is correct. If a fuse is blown, replace it with a new one of the same amperage rating as the original (15A FUSE). 4. To replace the fuse, remove the old fuse of the power supply lead and insert the new one.
English 7. WIRE CONNECTION INSTALLATION MANUAL Note: • Before installing, be sure to disconnect the negative cable of the car battery. • In the optional devices, the RCA Pin and the Connector cable are separately-sold items. Steering wheel remote control input terminal iPod Optical output terminal TV tuner input terminal Connector cable (CCA-670) CCD terminal (* 1) Radio antenna jack (or) CeNET terminal iPod with video Connector cable (CCA-673) Connect to the video of visual input terminal.
English Power supply lead INSTALLATION MANUAL B-2 B-3 B-5 B-4 B-1 B-6 1 B-7 B-8 A-7 A-8 ∗3 2 A-6 ∗1 No.
Parking brake lamp + lead to battery ●How to attach the electro-tap 1. Place the Parking brake lead at the stopper, and fold it back in the direction of the arrow. Parking brake Electro-tap Parking brake signal lead 2. Pass the Parking brake signal lead through, and fold it back in the direction of the arrow.
English 8.
Clarion Co., Ltd. 2007/2 (HUN-YI) All Rights Reserved. Copyright © 2007: Clarion Co., Ltd.
