Owner’s manual (Navigation) Mode d’emploi (Navigation) Benutzerhandbuch (Navigation) Manuale dell’utente (Navigazione) Gebruikershandleiding (Navigatie) Guía de usuario (Navegación) Ägarhandbok (Navigation) Manual do utilizador (Navegação) Brugervejledning (Navigation) MAX983HD All Rights Reserved.Copyright © 2008: Clarion Co., Ltd.
English 1. Preface Safety Precautions When using this navigation system, follow the precautions listed below. After reading this manual, be sure to keep it in a handy place (such as the glove box of your car). Warnings • This navigation system should not be used as a substitute for your own judgment. Any route suggestions made by this navigation system may never override any local traffic regulations, your own judgment, and/or knowledge of safe driving practices.
English About This Manual The following two manuals are provided to this system: ●Owner’s Manual (Audio, Visual, General & Installation) This manual (hereinafter referred to as “Audio Manual”) explains the functions and operation procedures of the AV features. In addition, the general precautions and other information on using this system are also explained in this manual.
1. Preface .......................................................................................................................... 3 Safety Precautions ......................................................................................................... 3 About This Manual ......................................................................................................... 4 Notes on Handling .........................................................................................................
English 2. Basic Operations See the Audio Manual for the procedure to turn the power on/off and the details of controls on the Operation Panel. Switching the Operation Mode To switch between the Navigation screen and Audio screen, press the [ NAVI] (Navi/AV) button. Menu Types and Operation This section explains the types of the typical menu screens on the touch panel and their operation. Destination menu Pressing the [MENU] button displays the Destination menu screen.
Menu Types and Operation Touching the [ ] key in the Destination menu or in the Navi Shortcut menu displays the Favourite list menu screen. Your favourite places can be registered in the Favourite list, and places often visited are automatically registered in the Frequent list. From the 3D List screen of the Favourite/Frequent list menu, you can enter a destination by an easy operation. From the 2D List screen, you can edit the list items by drag-and-drop operations. For details, see “7.
Menu Types and Operation English Navi Shortcut menu Touching the [NAVI] key from the Current Location Map screen displays the Navi Shortcut menu on top of the Map screen. Operate by touching the desired menu items or icons. [ ] key: Displays the Favourite list menu screen. [Dest] key: Displays the Destination menu screen of the navigation system. [Route] key: Displays the Route menu screen.
Menu Types and Operation After scrolling the map by touching the Map screen, touch the [OK] key on the screen to display the Location menu at the left side of the screen. You can set the location under the cursor at the centre of the screen as the destination or store it to the Address Book. [Back] key: [Nearby POI] key: Returns to the scrolled Map screen before touching the [OK] key. Displays the Category screen of the POIs in the vicinity of the location under the cursor.
English Map Screen Features Types of the map There are two types of map: the 2D map and the 3D map. Such as the method of scrolling the map, some operation are different depending on the map types. Moreover, you can display two types of maps at the same time on the divided screen, and can change the map orientation. Change the map appearance according to your preferences. ➜ “Scrolling the Map” (P. 16), “Changing the map appearance” (P.
Map Screen Features Indicators displayed on the Map screen are different according to the conditions at that time. This section explains the main indicators displayed on the Map screen. Indicators on the map of the current location 0 9 8 7 6 5 1 2 3 1 AV Shortcut key Displays the AV Shortcut menu. Letters displayed on the key vary to indicate the current mode of the AV feature. 2 Current street name Shows the name of the current street.
Map Screen Features English Indicators on the scrolled map Indicators are displayed after scrolling the map. During scrolling, only the scroll cursor is displayed on the map. 5 1 2 3 4 1 [Back] key 4 Latitude/longitude information Returns to the map of current location. Displays the latitude/longitude information of the location under the cursor. Whether this is displayed or not can be set. ➜ “Map Scrolling Information” (P. 47) 2 [OK] key Displays the Location menu.
Map Screen Features After a destination is set and travelling is started, the guidance route and various guidance information are displayed on the map. ➜ “Route Guidance Screen Features” (P. 30) 6 5 4 1 2 3 1 Small Turn by Turn Arrow display 4 Destination direction Displays the turning direction and distance to the next guidance point. Whether it is displayed or not can be set. ➜ “Map Guidance Settings” (P. 44) Indicates the direction to the destination from the current location.
Map Screen Features English Map symbols This navigation system indicates information such as roads and facilities using symbols and colours. Colour of the roads Motorways : (Yellow with red border) Main roads : (Red) Minor roads : (Yellow) Map symbols (examples) The following map symbols are displayed on the map.
Map Screen Features When the system receives RDS-TMC traffic information, detailed TMC traffic information on the route are displayed on the map. TMC traffic information is displayed on the map with symbols and congestion information colour. ➜ “5. Traffic Information” (P.
English Manipulating the Map Screen Scrolling the Map Zooming IN/OUT the map Touching the Map screen displays a cursor at the centre of the screen, and you can scroll the map. For the 2D map, touch the map to move the map to the touched position, and keep touching the map to scroll the map towards the touched direction. For the 3D map, touch the upper part of the map to scroll the map toward the touched direction, and touch the left or right part to rotate the map while touching.
Manipulating the Map Screen [3D] key: Changes to the 3D map using a viewing position above the vehicle while looking in the direction of the car heading. Note: To change the 3D angle, set the “3D Map Angle” as mentioned below. • 2D/2D Map [2D/2D] key: Displays two 2D maps right and left on the divided screen. This is convenient to view two maps with different scales. Note: To change the orientation or scale of the left map, set the “Left Map Heading” or “Left Map Scale” as mentioned below.
Manipulating the Map Screen English “Left Map Heading”: Changes the orientation of the left map. This control is available when the divided map screen is displayed. • [Heading Up] The map is displayed with the travelling direction pointing up. • [North Up] The map is displayed with north pointing up. “3D Map Angle”: Changes the angle of the 3D map. This control is available when the 3D map is displayed. • [Adjust] The angle control keys are displayed.
To start route guidance, operate the navigation system with the following procedure: ●Select the method of searching destination from the Destination menu screen, then search for the desired destination. Select a suitable searching method according to the place to search. ●Confirm the position of the place found with the Set Location menu screen or Place menu screen, then set the destination.
Outline of Destination Entering Procedures English 6. Enter the city name you wish to go to by touching the characters on the screen, then touch the [OK] key. [(Alphabet)] Scrolls the list to each initial letter. The total number of list items is displayed at the left of the screen. 8. Touch the [Street] key. The Street input screen is displayed. Note: You can omit the street name entry. By touching the [OK] key, proceed to step 13. [ ] Deletes the last entered character.
Outline of Destination Entering Procedures English 11.Touch the [House No.] key. The house number input screen is displayed. 14.Touch the [Start] key. The route guidance will be started. Note: You can omit the house number entry. By touching the [OK] key proceed to step 13. Note: In this screen, you can also select among other suggested routes with a different routing priority condition, obtain additional route information, and set waypoints. ➜ “Set Route menu” (P. 28) 12.
English 3. Entering the Destination Searching Your Destination from the Destination Menu You can search for a destination from the Destination menu by using various methods. Use a suitable searching method according to the place you wish to go to. Destination menu screen 1 Destination menu screen 2 1. Press the [MENU] button. The Destination menu screen is displayed. Touching the [ screen.
Searching Your Destination from the Destination Menu By Points of Interest (POI) For the operation procedure using the [Address], see “Setting destination by entering the address” (P. 19) Select the category of the place, narrow down the data by specifying the area or entering the name, and then select the place you wish to go to. By touching the [by Name] key, you can also search a place by simply entering the name. 1. Touch the [Points of Interest] key. 2. Touch your desired category.
Searching Your Destination from the Destination Menu English Going Home By Postal Code When your home address is registered, you can start route guidance to your home by a simple operation. You can search for destinations by entering the country name and the postal code of the place you wish to go to. Note: When your home address is not registered, register it by touching the [Home (Add New)] key. When the list of searching methods appears, register your home address by the desired method.
Searching Your Destination from the Destination Menu By Stored Routes You can search an entrance or exit of a motorway to set as the destination. 1. Touch the [ ] (Next) key. 2. Touch the [M-way Entrance/Exit] key. 3. Touch the [Country] key, then touch the country name, if necessary. 4. Touch the [Motorway] key. 5. Enter the name of the motorway, then touch the [OK] key. 6. From the displayed Motorway list, touch the desired motorway to select. 7. Select the [Entrance] or [Exit] key. 8.
English Searching Your Destination from the Map Screen You can search for a place by scrolling the map, and set it as the destination. 1. Scroll the map by touching the Map screen, and move the cursor to the place you wish to go to. Touch the [OK] key. ➜ “Scrolling the Map” (P. 16) 2. Confirm the location of the destination, then touch the [New Dest] key. 3. Touch the [Start] key. Note: When you search a place far from the current location, change the map scale to search more quickly.
You can enter a destination by selecting from the list of the registered favourite places or the places often visited. For detailed usage of the Favourite/Frequent list, see “Using Favourite/Frequent List” (P. 54) By Favourite By Frequent You can enter a destination by selecting a place from the Favourite list registered beforehand. 1. From the Destination menu or the Navi Shortcut menu, touch the [ ] key. The Favourite list screen is displayed.
English Setting the Destination and Starting the Route Guidance Set Location menu Set Route menu From the Set Location menu displayed when setting the searched place as the destination, you can perform the following operations according to the conditions: When you enter the destination, the Set Route menu is displayed with the map showing the suggested routes.
Setting the Destination and Starting the Route Guidance English • [Simulation] Starts the simulation of the route guidance with moving the vehicle mark automatically. Touching the [G] key stops the simulation temporarily, and the [P] key restarts the simulation. Touching the [p] key stops the simulation, and returns to the previous screen. [Add Way Pt.] key: Adds waypoints to the suggested route displayed on the map.
English 4. Route Guidance After you have entered the destination and started the route guidance, you will be guided along the route by screen display and by voice. Route Guidance Screen Features As well as the Map screen, various guidance screens are displayed during the route guidance mode according to the situation. Press the [MAP] button to switch the screen among the following guidance screens. Intersection Map When you get near to approx.
Route Guidance Screen Features The screen is always divided into two displays and the Turn List on Route is displayed on the left display if Turn list on Route is activated. The Turn List contains the guidance points next to the vehicle position, and will change while travelling. When you get near to the next guidance point, the left display is automatically changed to the Intersection Map. You can set whether to display the Turn List screen or not. The factory setting is OFF.
English About the Voice Guidance After starting the route guidance, not only guidance by screen but also guidance by voice, such as the turning direction or the distance to the guidance point, will be given when you get near to the guidance point. You can set whether to use the voice guidance or not, and set the volume to be changed according to the vehicle speed. ➜ “Guidance Voice Settings” (P.
Changing/Editing the Route Settings Cancelling the route guidance Terminates the route guidance during the route guidance mode. 1. Touch the [Cancel Route] key. A confirmation message is displayed. This key is also provided on the Destination menu screen. 2. Touch the [Yes] key. The route guidance will be terminated, and the destination and route will be deleted. Resuming the cancelled route guidance Restores the previous route, and restarts the cancelled route guidance. 1. Touch the [Resume Route] key.
Changing/Editing the Route Settings English • [Delete]: Displays a confirmation screen. If you touch the [Yes] key, the destination/ waypoint is deleted. • [ ]: You can adjust the location of the destination/waypoint by scrolling the map. [(Route calculation condition icon)] You can change the conditions of route calculation. When you change a condition, the route is recalculated with the specified condition. When waypoints are specified, you can set the condition for each section of the route.
Changing/Editing the Route Settings Confirms various information of the current route. 1. Touch the [Route Information] key. The Route Information menu screen is displayed. [Route Info] Displays the list of route information. The main guidance points from the current location to the destination are displayed by the list format. When there is a lot of information items, you can scroll the list by touching the [D], [I], [i], [d] keys.
English Notes on the Route Guidance • When you enter the destination, be sure to stop the vehicle in a safe place. • The displayed route is only a suggested route. • Roads can change every day, and may have changed in geometries and traffic regulations from the date the map data is created. Be sure to follow the actual traffic regulations. • It may take a little time until the suggested route is displayed according to the situation.
English Notes on the Voice Guidance • The voice guidance may not match the actual roads or regulations. The cause of this can be that the actual roads and the data in the map database are different, or the vehicle speed. • If the content of the voice guidance does not match the actual roads or regulations, follow the information acquired from the actual traffic or road signs. • The voice guidance is activated only for intersections with certain conditions.
English 5. Traffic Information The RDS-TMC (Radio Data System-Traffic Message Channel) provides various information useful for driving using FM radio transmission. The system can receive RDS-TMC information, and can display the information on traffic conditions, congestion forecasts, and weather forecasts, etc. on the screen and on the map. By using RDS-TMC, you can obtain or confirm event information on congestions, road works, and suspension of traffic, etc. around the route and the vehicle position.
Displaying the Traffic Information Displaying traffic information on the map Confirms the traffic information on the current route. 1. Touch the [Traffic Info on Route] key. The TMC event list is displayed in order of distance from the current location on the current route. The time of the event received is displayed on the right side of the list. 2. Touch the desired event. Detailed information of the event is displayed. Touch the [I] / [i] key to Scroll the detailed information screen.
Displaying the Traffic Information English Displaying traffic information on the registered user location 1. Touch the [User Locations] key. The User Locations list and the map around the User Location is displayed. 2. Touch the desired User Location. The map moves, and you can identify the TMC event by the TMC traffic information symbol. You can edit/register a User Location by touching the desired list item. [(User Location name)] The Edit User Location screen is displayed.
Displaying the Traffic Information English TMC urgent information indication Diverted routes with traffic information considered When the system receives a TMC information of high urgency located within 10km from the vehicle position or within 50km on the route, the system displays the high urgency information automatically, with a priority higher than any other screen. To return to the Map screen, touch the [OK] key.
English 6. System Settings You can set various settings of the navigation system from the Setting menu. Setting menu screen 1 Setting menu screen 2 1. Press the [ ] (Set) button. The Setting menu screen is displayed. Touching the [ ] (Next) key displays the additional Setting menu screen. 2. Touch the desired menu item. For the operation procedure hereafter, see the explanation of each section. Note: • For details about the Screen Colour item, see “Setting the Screen Colour mode” (P.
When you touch the [General] key from the Setting menu, you can set various settings concerning the general features. Language setting Changing Skin You can change the language used by the system. As for “English”, you can also select the unit of distance (km/mile). You can change the screen design by using the skin data stored in the hard disk drive.
English Navigation Settings When you touch the [Navigation] key from the Setting menu, you can set various settings or confirm the information concerning the navigation function. Map Guidance Settings Guidance Voice Settings You can change settings concerning the screen route guidance. 1. Touch the [Map Guidance Settings] key. The Guidance Settings menu screen is displayed. 2. Touch the desired menu item to set. “Route Guidance” Turns ON/OFF the route guidance.
Navigation Settings Avoid Area Settings You can change the map appearance, such as the colours of the map, type of vehicle mark, etc. You can register areas you do not want to pass or areas that often get congested as an Avoid Area. When you register the Avoid Areas, you can set the system to calculate routes avoiding the registered areas. ➜ “Setting the conditions of the route calculation” (P. 34) Up to 10 Avoid Areas can be registered. You can edit the registered Avoid Areas.
Navigation Settings English TMC Traffic Information Settings 1. Touch the [TMC Traffic Info Settings] key. The TMC Traffic Info Setting menu screen is displayed. For details of the TMC settings , see “Setting TMC traffic information” (P. 40). Tracking Display Settings The system can display track data for one trip (from ACC ON to OFF) from the place of departure up to a distance of 100 km on the map.
Navigation Settings Navigation System Check You can set the information displayed on the scrolled map screen. 1. Touch the [Map Scrolling Information] key. The Map Scrolling Information menu screen is displayed. 2. Touch the [ON] or [OFF] key of each item. “Address Book Icons” Shows/hides detail information display for icons of locations registered in the Address Book while scrolling. “TMC Traffic Icons” Shows/hides detail information display for icons of TMC traffic information while scrolling.
English Audio Settings When you touch the [Audio] key from the Setting menu, you can set various setting concerning the audio features. For details, see the Audio Manual. Adjusting the Monitor Setting the Screen Colour mode The system has two Screen Colour mode: the Day mode and the Night mode. Each Screen Colour mode has the own dimmer level setting. To switch to the Day mode or Night mode manually, touch the [Day] or [Night] key of the “Screen Colour” item on the Setting menu.
English Registering/Editing the Data From the Stored Data menu, you can register the home address, addresses of facilities and places, routes, track data, and Avoid Areas. You can also edit the data registered. The registered places or routes can be set as the destination or as the current route. 1. Touch the [ ] (Next) key from the Setting menu. 2. Touch the [Stored Data] key to display the Stored Data menu. Home Location Registers your home address. You can edit the registered home address.
Registering/Editing the Data English [Store to Favourite] Registers the Stored Location to the Favourite list. Note: The Address Book can sorted by the registration number, name, icon, or group. So we recommend you set these items for your convenience. Stored Tracking By touching the [Stored Tracking], you can register/edit the Stored Tracking, or change settings for show/hide of the Stored Tracking. The operation procedures are the same as for the Tracking Display Settings of the Navigation settings.
English Importing Data Using the SD Card From the [Import Data] menu, you can import the downloaded data from the website. For more information about the installation method and the function, see the Clarion homepage. 1. Touch the [ ] (Next) key from the Setting menu. 2. Touch the [Import Data] key to display the Import Data menu. Note: When you perform the operation of data import, confirm that the SD card on which the relevant data is stored has been set to the SD card slot. To use the SD card 1.
English Service Options From the [Service Option] menu, you can perform the operation such as displaying a demonstration of the navigation system, backup or restore of stored data, and resetting to the factory settings. 1. Touch the [ ] (Next) key from the Setting menu. 2. Touch the [Service Option] key to display the Service Option menu. Demonstration Displays the demonstration of the route guidance. “Demo”: Touch the [Select] key, then touch the desired demonstration course to play.
From the Safety Camera menu, you can set the Safety Camera. 1. Touch the [ ] (Next) key from the Setting menu. 2. Touch the [Safety Camera] key to display the Safety Camera menu. 3. Touch the desired menu item to set. “Show Icon on Map”: Turns ON/OFF the Safety Camera Icon display on the map. “Warning & Sound”: Turns ON/OFF both of the warning indication and alarm sound when the vehicle gets near a Safety Camera location.
English 7. Favourite/Frequent List Operations What is Favourite/Frequent List? The system has the following 3 shortcut lists: • Favourite list: You can register your favourite places. • Frequent list: Destinations frequently entered are automatically registered. • Recent Album list: Albums recently selected from the Music Search are automatically registered (see the Audio Manual for details).
Using Favourite/Frequent List English Favourite/Frequent menu 3D List screen 8 7 6 1 2 3 4 5 1 [N] [n] key 6 Icon Scrolls the list to display other icons. Up to 5 icons are displayed on the screen. Indicates the category of each registered place. For the rotating icon, the registered name is displayed at the upper left of the screen. By touching the desired icon, you can set the registered place as the destination. ➜ “Searching Your Destination from the Favourite/Frequent List” (P.
Using Favourite/Frequent List English 2D List screen 5 4 3 1 2 1 Icon 4 Trash/Folder Indicates the category of a registered place. The icon can be moved by touching and dragging it. Thus, you can change the location of the desired icon in the list, or drop the desired icon to the Trash icon to discard it or to the Folder icon to store it to the Favourite list. In the Favourite list screen, the Trash icon is displayed. You can discard the desired icon by dragging and dropping it to the Trash icon.
This system has a built in voice recognition function. You can perform fundamental operations by saying the corresponding voice commands. Note: • The supported languages by the voice command function are English, French, German, Italian, Dutch and Spanish. You can perform voice command operations after switching to a supported language. For details of switching languages, please see the “Language setting” (P. 43).
Voice Command Features English Example of voice command operation This section provides an example of the destination entry by inputting the location stored in the Address Book by voice. 1. Press the [VOICE] button. The Voice Command menu screen is displayed, and the announcement for the user to say the desired command and a beep sound are heard. The system enters the voice input waiting mode. 2. Say “Address book”.
The following table lists the fundamental command examples which can be input during the voice input wait mode entered by pressing the [VOICE] button, classified by the usage. Note: • You can omit the term enclosed by ( ). • Touching the [ ] key displays the voice commands usable at that operating condition. You can refer to them. ●Common voice commands available anytime during voice input These are the commonly usable commands in any condition during the voice input operation.
List of the Voice Commands (Navigation Features) English ●Voice commands for entering destination Say “(Find) Destination” ➜ then say the following command. Operation Sets the home address as the destination. Command “(My) Home” “(Go/Return to) (my) home”, “Set destination to (my) home” Enters from the Address Book. “(From) Address Book” Enters from the Nearby POI. “(From) Nearby POI” Enters from the Previous Destinations.
• When operating the system by voice, it is necessary to reduce the surrounding noises to be recognised correctly. Follow the following guidelines. • Close the windows. • Say commands clearly and correctly toward the microphone. • Refrain from other conversations while voice input. • After the announcement request to say commands is heard, say commands during the blue bar is displayed on the voice input listening time indication bar. The system returns to the previous screen when the blue bar runs out.
English 9. Others Troubleshooting Problem Cause Remedy RDS-TMC The provider of RDS-TMC is not automatically selected. The aerial is not connected. Confirm the connection of the aerial. [Manual] is selected on the Select TMC Provider screen. Select [Automatic]. The menu screen is not displayed. Certain keys/functions are not available for your safety during driving. Menu is displayed again when the vehicle is stopped in a safe place. Too many landmark icons are displayed on the map.
Error of the vehicle position When the vehicle travels, this system learns the distance and the direction advanced on the map from the travelling data and corrects the position accordingly. (distance coefficient/learning function). Therefore, some initial travelling data is required for proper operation. According to the travelling situation and condition of the GPS satellites, the position of the vehicle position mark and the actual vehicle position may be different, but this is not a malfunction.
Owner’s manual (Navigation) Mode d’emploi (Navigation) Benutzerhandbuch (Navigation) Manuale dell’utente (Navigazione) Gebruikershandleiding (Navigatie) Guía de usuario (Navegación) Ägarhandbok (Navigation) Manual do utilizador (Navegação) Brugervejledning (Navigation) MAX983HD All Rights Reserved.Copyright © 2008: Clarion Co., Ltd.
Käyttöturvallisuusohjeet VAROITUS • Tätä navigointijärjestelmää ei saa käyttää korvaamaan omaa harkintaasi. Mitkään navigointijärjestelmän antamat reittiehdotukset eivät koskaan saa ohittaa paikallisia liikennesääntöjä, omaa harkintaasi ja/tai turvallisen ajokäyttäytymisen tapoja.
Sikkerhetsregler Advarsel • Dette navigasjonssystemet bør ikke benyttes som en erstatning til Deres egne vurderinger og veivalg. Navigasjonssystemets anbefaling av rute må aldri benyttes dersom denne er i strid med eller tilsidesetter lokale trafikkreguleringer, deres egne vurderinger eller skjønn og/ eller gjeldende regler og praksis for sikker kjøring.
Bezpečnostní opatření Varování • Tento navigační systém by neměl nahrazovat váš vlastní úsudek. Bez ohledu na to, jakou trasu tento navigační systém navrhne, musíte vždy dodržovat dopravní předpisy, řídit se vlastním úsudkem a dodržovat zásady bezpečného řízení vozidla.
Bezpečnostné pokyny Varovanie • Tento navigačný systém by nemal nahrádzat’ váš vlastný úsudok. Bez ohl’adu na to, akú trasu tento navigační systém navrhne, musíte vždy dodržiavat’ dopravné predpisy, riadit’ sa vlastným úsudkom a dodržiavat’ zásady bezpečného riadenia vozidla.
Mjere opreza Upozorenje • Ovaj navigacijski sustav ne može se koristiti kao zamjena za vlastitu procjenu. Bilo kakvi smjerovi koje ovaj navigacijski sustav predloži ne mogu ni u kojem slučaju imati prednost pred lokalnom prometnom regulacijom, Vašom vlastitom procjenom i/ili znanjima o sigurnoj vožnji.
Varnostne informacije Opozorilo • Ta navigacijski sistem ne nadomešča presoje uporabnika. Katerokoli usmeritveno priporočilo, vsebovano v tem navigacijskem sistemu, ne more nikoli imeti prednosti pred lokalnimi prometnimi predpisi, pred osebno presojo uporabnika in/ali pred pravili varne vožnje.
Zasady bezpieczenstwa Ostrzeżenie • System nawigacyjny nie powinien stanowić dla użytkownika substytutu jego indywidualnej oceny sytuacji. Jakiekolwiek wskazówki dotyczące drogi generowane przez system nawigacyjny nie powinny nigdy zastępować użytkownikowi lokalnych przepisów drogowych, indywidualnej oceny sytuacji i/lub znajomości zasad bezpiecznej jazdy.
Biztonsági óvintézkedések Figyelmeztetés • A jelen navigációs rendszer nem helyettesíti az Ön ítélőképességét. A navigációs rendszer által adott bármilyen útvonaljavaslat nem pótolja a helyi közlekedési szabályokat, az Ön megítélését és/vagy az Ön biztonságos vezetését.
END USER LICENSE AGREEMENT PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY BEFORE USING THE NAVTEQ DATABASE NOTICE TO THE USER THIS IS A LICENSE AGREEMENT - AND NOT AN AGREEMENT FOR SALE - BETWEEN YOU AND NAVTEQ B.V. FOR YOUR COPY OF THE NAVTEQ NAVIGABLE MAP DATABASE, INCLUDING ASSOCIATED COMPUTER SOFTWARE, MEDIA AND EXPLANATORY PRINTED DOCUMENTATION PUBLISHED BY NAVTEQ (JOINTLY “THE DATABASE”).
accuracy, reliability, or otherwise. NAVTEQ does not warrant that the Database is or will be error free. No oral or written information or advice provided by NAVTEQ, your supplier or any other person shall create a warranty or in any way increase the scope of the limited warranty described above. The limited warranty set forth in this Agreement does not affect or prejudice any statutory legal rights that you may have under the legal warranty against hidden defects.
LIZENZVERTRAG FÜR ENDBENUTZER WICHTIG - BITTE LESEN SIE DIESEN LIZENZVERTRAG FÜR ENDBENUTZER VOR DER VERWENDUNG DER NAVTEQ DATENBANK SORGFÄLTIG DURCH. HINWEIS FÜR DEN BENUTZER DAS VORLIEGENDE DOKUMENT IST EIN LIZENZVERTRAG UND KEIN KAUFVERTRAG ZWISCHEN IHNEN UND NAVTEQ B.V. FÜR IHRE KOPIE DER NAVIGATIONSKARTENDATENBANK VON NAVTEQ, EINSCHLIESSLICH ZUGEHÖRIGER COMPUTERSOFTWARE, MEDIEN UND VON NAVTEQ HERAUSGEGEBENER SCHRIFTLICHER UNTERLAGEN ZUR ERLÄUTERUNG (GEMEINSAM "DIE DATENBANK").
Möglichkeiten stellen Ihr einziges Rechtsmittel gegen NAVTEQ dar. Soweit in diesem Abschnitt nicht ausdrücklich anderweitig festgelegt, macht NAVTEQ im Hinblick auf Richtigkeit, Genauigkeit, Zuverlässigkeit oder in anderer Hinsicht keine weiteren Gewährleistungen oder Zusicherungen bezüglich der Nutzung der Ergebnisse, die durch die Verwendung der Datenbank erzielt werden. NAVTEQ gewährleistet nicht, dass die Datenbank ohne jeglichen Fehler ist oder sein wird.
CONTRAT DE LICENCE POUR L’UTILISATEUR FINAL VEUILLEZ LIRE ATTENTIVEMENT CE CONTRAT DE LICENCE A L’USAGE DE L’UTILISATEUR FINAL AVANT D’UTILISER LA BASE DE DONNEES NAVTEQ NOTE POUR L’UTILISATEUR CECI EST UN CONTRAT DE LICENCE – ET NON UN CONTRAT DE VENTE – ENTRE VOUS ET LA SOCIETE NAVTEQ B.V.
donne aucune garantie et ne fait aucune déclaration concernant l’utilisation ou les résultats de l’utilisation de la Base de données en ce qui concerne son exactitude, sa précision, sa fiabilité ou toute autre qualité. NAVTEQ ne garantit pas que la Base de données est ou sera exempte de toute erreur.
CONTRATTO DI LICENZA ALL'UTENTE FINALE LEGGERE ATTENTAMENTE IL PRESENTE CONTRATTO DI LICENZA PER L’UTENTE FINALE PRIMA DI UTILIZZARE IL DATABASE NAVTEQ NOTA PER L’UTENTE QUESTO È UN CONTRATTO DI LICENZA – E NON UN CONTRATTO DI VENDITA – FRA LEI (UTENTE FINALE) E LA NAVTEQ B.V.
e nessun consiglio fornito da NAVTEQ, dal Suo fornitore o da qualsiasi altra persona costituiranno una garanzia o in qualsiasi modo un ampliamento dell’ambito della garanzia limitata sopra descritta. La garanzia limitata accordata in questo contratto non incide né pregiudica alcun diritto derivante dalla legge, che Lei possa vantare in relazione alla garanzia legale contro i difetti occulti.
GEBRUIKSRECHTOVEREENKOMST MET EINDGEBRUIKERS LEES DEZE GEBRUIKSRECHTOVEREENKOMST GOED DOOR VOORDAT U DE NAVTEQ DATABASE GEBRUIKT KENNISGEVING AAN DE GEBRUIKER DIT IS EEN GEBRUIKSRECHTOVEREENKOMST - EN GEEN KOOPOVEREENKOMST – TUSSEN U EN NAVTEQ B.V. MET BETREKKING TOT UW EXEMPLAAR VAN DE NAVTEQ WEGENKAARTDATABASE, INCLUSIEF VERWANTE COMPUTERSOFTWARE, DRAGERS EN BIJBEHOREND SCHRIFTELIJK MATERIAAL TER UITLEG ZOALS DIT DOOR NAVTEQ WORDT UITGEGEVEN (TEZAMEN ‘DE DATABASE’).
Overeenkomst. Het voorgaande is NAVTEQ’s totale aansprakelijklheid en uw enige verhaalsmogelijkheid jegens NAVTEQ. Behoudens voorzover uitdrukkelijk bepaald in dit artikel, verleent NAVTEQ geen enkele garantie met betrekking tot het gebruik van de Database of de resultaten die u met behulp van de Database kunt verkrijgen, in de zin van foutloosheid, nauwkeurigheid, betrouwbaarheid of anderszins. NAVTEQ garandeert niet dat de Database foutloos is of zal zijn.
CONTRATO DE LICENCIA PARA USUARIOS FINALES ANTES DE UTILIZAR LA BASE DE DATOS NAVTEQ LEA DETENIDAMENTE EL PRESENTE CONTRATO DE LICENCIA PARA USUARIOS FINALES NOTIFICACIÓN PARA EL USUARIO EL PRESENTE ES UN CONTRATO DE LICENCIA - Y NO UN CONTRATO DE COMPRAVENTA ENTRE USTED Y NAVTEQ B.V.
garantía, ni hará representaciones con respecto al uso de resultados o al uso de la Base de datos en términos de perfección, exactitud, fiabilidad u otros conceptos. NAVTEQ no garantiza la perfección presente ni futura de la Base de datos. Ninguna información o recomendación, oral o escrita, que haya sido suministrada por NAVTEQ, por su proveedor o por cualquier otra persona, constituirá garantía ni, en ninguna otra forma, contemplará una ampliación de la limitación de garantía anteriormente expuesta.
SLUTBRUGERLICENSAFTALE LÆS VENLIGST DENNE SLUTBRUGERLICENSAFTALE OMHYGGELIGT INDEN DU BEGYNDER AT BRUGE NAVTEQ DATABASE MEDDELELSE TIL BRUGEREN DETTE ER EN LICENSAFTALE - OG IKKE EN SALGSAFTALE- MELLEM DIG OG NAVTEQ B.V. VEDRØRENDE DIN KOPI AF NAVTEQ NAVIGABLE MAP DATABASE HERUNDER TILKNYTTET COMPUTERSOFTWARE, MEDIER OG SUPPLERENDE TRYKT MATERIALE UDGIVET AF NAVTEQ (”DATABASEN”). VED AT BRUGE DATABASEN, ACCEPTERER DU ALLE VILKÅR OG BETINGELSER I DENNE SLUTBRUGERLICENSAFTALE (”SLUTBRUGERLICENSAFTALEN”).
af den herover beskrevne begrænsede garanti. Den i slutbrugerlicensaftalens anførte begrænsede garanti har ingen indflydelse på eller skader nogen lovfæstede rettigheder, du måtte have i henhold til den lovfæstede garanti mod skjulte mangler. Hvis du ikke købte Databasen direkte fra NAVTEQ, har du måske lovfæstede rettigheder mod den person, fra hvilken du købte Databasen, udover de herunder af NAVTEQ afgivne rettigheder i overensstemmelse med bestemmelserne i din jurisdiktion.
ACORDO DE LICENÇA DO UTILIZADOR FINAL QUEIRA POR FAVOR LER ATENTAMENTE ESTE ACORDO DE LICENÇA DO UTILIZADOR FINAL ANTES DE UTILIZAR A BASE DE DADOS NAVTEQ AVISO PARA O UTILIZADOR O PRESENTE DOCUMENTO É UM ACORDO DE CONCESSÃO DE LICENÇA - E NÃO UM ACORDO PARA EFEITOS DE VENDA - ENTRE O UTILIZADOR E A NAVTEQ B.V.
substituição da cópia da Base de Dados que não esteja a funcionar devidamente. Se os referidos esforços não conduzirem a um desempenho da Base de Dados que esteja em consonância com as garantias aqui explicitadas, o utilizador poderá optar entre receber uma quantia racional a título de reembolso pelo preço pago pela Base de Dados ou rescindir o presente Acordo. As opções mencionadas constituem responsabilidade integral da NAVTEQ o único meio de recurso do utilizador em relação à NAVTEQ.
LICENSAVTAL FÖR SLUTANVÄNDARE LÄS DETTA LICENSAVTAL FÖR SLUTANVÄNDARE NOGGRANT INNAN NI ANVÄNDER NAVTEQ DATABAS MEDDELANDE TILL ANVÄNDARE DETTA ÄR ETT LICENSAVTAL - OCH INTE ETT AVTAL FÖR FÖRSÄLJNING - MELLAN ER OCH NAVTEQ B.V. FÖR ERT EXEMPLAR AV NAVTEQ NAVIGABLE MAP DATABAS, INKLUDERANDE TILLHÖRANDE PROGRAMVARA, MEDIA OCH TRYCKT MANUAL UTGIVEN AV NAVTEQ (GEMENSAMT BENÄMNDA "DATABASEN").
rättighet som Ni kan ha enligt i lag föreskriven garanti mot dolda fel. Om Ni inte anskaffade Databasen direkt från NAVTEQ kan Ni ha ytterligare lagstadgade rättigheter gentemot den person från vilken Ni anskaffade Databasen, utöver de rättigheter som Ni erhållit från NAVTEQ enligt denna bestämmelse, i enlighet med lagen i Er jurisdiktion. NAVTEQs ovanstående garanti påverkar inte sådana lagstadgade rättigheter och Ni kan utöva sådana rättigheter i tillägg till garantierna i detta avtal.
LISENSAVTALE FOR SLUTTBRUKERE VENNLIGST LES DENNE LISENSAVTALEN FOR SLUTTBRUKERE NØYE FØR DU TAR DATABASEN NAVTEQ I BRUK MERKNAD TIL BRUKEREN DETTE ER EN LISENSAVTALE - OG IKKE EN AVTALE OM SALG - MELLOM DEG OG NAVTEQ B.V. FOR DIN KOPI AV 'THE NAVTEQ NAVIGABLE MAP DATABASE', INKLUDERT TILKNYTTET DATAPROGRAMVARE, MEDIER OG FORKLARENDE TRYKT DOKUMENTASJON UTGITT AV NAVTEQ (SAMLET KALT “DATABASEN”). VED Å BRUKE DATABASEN, GODTAR DU ALLE VILKÅRENE I DENNE LISENSAVTALEN FOR SLUTTBRUKERE (“AVTALEN”).
defekter. Hvis du ikke kjøpte Databasen direkte fra NAVTEQ, kan du ha lovfestede rettigheter i forhold til den personen du kjøpte Databasen fra, i tillegg til de rettigheter NAVTEQ har gitt deg med dette dokumentet, i henhold til lovverket i din rettskrets. Ovenstående garanti fra NAVTEQ skal ikke påvirke slike lovfestede rettigheter og du skal ha rett til å gjøre dem gjeldende i tillegg til de garantirettigheter du har fått i dette dokumentet.
SMLOUVA O POSKYTNUTÍ LICENCE KONCOVÉMU UŽIVATELI PROSÍME, PŘEČTĚTE SI PEČLIVĚ TUTO SMLOUVU O LICENCI KONCOVÉHO UŽIVATELE ŘRED TÍM, NEŽ POUŽIJETE DATABÁZI NAVTEQ OZNÁMENÍ UŽIVATELI TOTO JE SMLOUVA O LICENCI – A NIKOLI SMLOUVA O PRODEJI – MEZI VÁMI A SPOLEČNOSTÍ NAVTEQ B.V. NA VAŠI KOPII DATABÁZE NAVIGOVATELNÝCH MAP NAVTEQ, VČETNĚ SOUVISEJÍCÍHO PROGRAMOVÉHO VYBAVENÍ, NOSIČŮ A VYSVĚTLUJÍCÍ TIŠTĚNÉ DOKUMENTACE PUBLIKOVANÉ SPOLEČNOSTÍ NAVTEQ (SOUHRNNĚ „DATABÁZE“).
která můžete mít ze zákonného ručení proti skrytým vadám. Pokud jste nenabyl(a) Databázi od NAVTEQ přímo, můžete mít zákonná statutární práva vůči osobě, od níž jste Databázi nabyl(a), dodatkem ke zde uvedeným právům zaručovaným společností NAVTEQ, podle zákona Vaší jurisdikce. Výše uvedená záruka společnosti NAVTEQ se nedotkne takových zákonných práv a můžete taková práva uplatňovat dodatkem k záručním právům zde uděleným.
LOPPUKÄYTTÄJÄN KÄYTTÖOIKEUSSOPIMUS TÄMÄ KÄYTTÖOIKEUSSOPIMUS ON LUETTAVA HUOLELLISESTI ENNEN NAVTEQTIETOKANNAN KÄYTTÖÄ TIEDOKSI KÄYTTÄJÄLLE TÄMÄ ON KÄYTTÄJÄN JA NAVTEQ B.V:N VÄLINEN KÄYTTÖOIKEUSSOPIMUS - EI MYYNTISOPIMUS - JOKA KOSKEE KÄYTTÄJÄN HANKKIMAA TIEKARTTATIETOKANNAN KOPIOTA, MUKAAN LUKIEN SIIHEN KUULUVA TIETOKONEOHJELMISTO, TIETOVÄLINEET JA NAVTEQIN JULKAISEMA KIRJALLINEN OPASTUSAINEISTO (YHDESSÄ ”TIETOKANTA”).
mahdollisesti takaa käyttäjälle. Jos käyttäjä ei ole hankkinut tietokantaa suoraan NAVTEQilta, hänellä saattaa olla NAVTEQin takaamien oikeuksin lisäksi kansallisen lainsäädännön takaamia oikeuksia siihen henkilöön nähden, jolta hän on hankkinut tietokannan. Edellä esitetty NAVTEQin takuu ei vaikuta näihin lakisääteisiin oikeuksiin ja käyttäjä voi vedota niihin edellä myönnettyjen takuuoikeuksien lisäksi.
This system contains software that is licensed to Manufacturer by an affiliate of Microsoft Corporation pursuant to a license agreement. Any removal, reproduction, reverse engineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Map Coverage 07Q4 Country Western Europe Eastern Europe Detailed Coverage (%) Austria Belgium, Netherlands, Luxemburg Denmark Finland France, Andorra, Monaco Germany Ireland Italy, San Marino, Vatican city state Norway Portugal Spain Sweden Switzerland, Liechtenstein United Kingdom Croatia Czech Republic Bulgaria Estonia Greece Hungary Latvia Lithuania Poland Romania Slovakia Slovenia 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% 41.0% 54.0% 14.0% 29.
Owner’s manual (Audio, Visual, General & Installation) Mode d’emploi (Audio, vidéo, fonctionnement général et installation) Benutzerhandbuch (Lyd visuel, generelt og installation) Manuale dell’utente (Audio, video, generali e installazione) Gebruikershandleiding (Audio, visueel, algemeen en installatie) Guía de usuario (Imagen, sonido, general e instalación) Ägarhandbok (Ljud, Sikt, Allmänt & Installation) Manual do utilizador (Áudio, Visual, Geral e Instalação) Brugervejledning (Audio, Video, Allgemein und
English 1. Preface Safety Precautions WARNING • For your safety, the driver should not watch the DVD video/TV/VTR or operate the controls while driving. Please note that watching and operating the DVD video/TV/VTR while driving are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard. • Do not disassemble or modify this unit. It may cause an accident, fire, or electric shock.
English About This Manual The following two manuals are provided to this system: ● Owner’s Manual (Audio, Visual, General&Installation) (This Book) Owner’s manual This manual (hereinafter referred to as “Audio Manual”) explains the functions and operation procedures of the AV features. In addition, the general precautions and other information on using this system are also explained in this manual.
Notes on Handling ● Important Cleaning the unit ● Cleaning the cabinet Use a soft, dry cloth and gently wipe off the dirt. For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth. Do not use benzene, thinner, car cleaner, etc., as these substances may damage the cabinet or cause the paint to peel. Also, leaving rubber or plastic products in contact with the cabinet for long periods of time may cause stains.
English Notes on Data Stored in This System If you transfer or resell this unit to a third party or abandon this unit, note the following matters, deal with them under your own appropriate management. Owner’s manual ● For your privacy protection Initialize (delete) all data (address data, etc.) including private information stored in the hard disk and the memory by the procedures described in this manual. For details, see “Resetting to the Factory Settings” (P. 72). About the registered marks etc.
About the registered marks etc. English Gracenote® End User Licence Agreement Version 20061005 Owner’s manual This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”).
English Contents 1. Preface................................................................................................................................... 3 Owner’s manual Safety Precautions ...........................................................................................................................3 About This Manual ...........................................................................................................................4 Notes on Handling.............................
English 2. Basic Operations Name and Function of the Controls Owner’s manual Name of the Controls [ NAVI] (Navi/AV) [7 OPEN/CLOSE] Sensor [ [ INFO] ] (Set) Blinking LED [VOICE] [+], [–] (Volume) [MENU] [MAP] [SRC] (Source) [R], [F] (Search) [OUT] (Zoom Out) [IN] (Zoom In) Function of the Controls [ NAVI] (Navi/AV) button • Press this button to switch the screen between the Navigation mode screen and AV mode menu screen.
Name and Function of the Controls English Owner’s manual [MAP] button • Press this button to display the Map screen of the current location in any mode. • Keep pressing this button more than 1 second to display the Turn-by Turn/Compass screen in any mode. [OUT] (Zoom Out) button • Press this button to decrease the map scale and to show a wider area of the map when the map is displayed. Keep pressing this button to enter the Free Zoom mode.
English Menu Types and Operation This section explains the types of the typical menu screens on the touch panel and their operation. AV Shortcut menus Pressing the [SRC] (Source) button when the AV feature is turned on displays the Source menu screen. You can change the media sources or control the 2Zone function by touching the desired menu item. ➜ “Selecting Media Source” (P. 18), ➜ “2Zone Function” (P. 19).
English Turning the Power ON/OFF Owner’s manual Note: • Start the engine before using this unit. • Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery. Turning the power on 1. Start the engine. The illuminations on this unit light up and the power is automatically turned on.
Open the operation panel when setting/ejecting a disc or SD card. The angle of the operation panel can be adjusted depending on the mounting angle of the unit or light coming into the car. • Do not move the operation panel forcibly or do not apply strong force to the operation panel. • When the operation panel is operating, be careful not to get your hand or finger caught between the operation panel and main unit or its mechanical parts. • The driver should not operate the operation panel while driving.
English Switching the Operation Mode To switch between the Navigation screen and Audio screen, press the [ NAVI] (Navi/AV) button. Turning the Audio OFF Owner’s manual You can turn off all of the AV features. 1. Keep pressing the [SRC] (Source) button more than 1 second. The AV features are turned off. ● Turning the AV features on 1. Press the [SRC] (Source) button. The AV features are turned on, and the system resumes the last status of the AV features.
Playable discs This DVD player can play the following discs. DVD video discs Audio CDs About CD Extra discs A CD Extra disc is a disc in which a total of two sessions have been recorded. The first session is Audio session and the second session is Data session. Your personally-created CDs with more than second data sessions recorded cannot be played on this DVD player. Note: • When you play a CD Extra disc, only the first session will be recognised.
Setting/Ejecting a Disc English Setting a disc Storage Owner’s manual • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters. Cleaning • To remove finger marks and dust, use a soft cloth and wipe in a straight line from the centre of the disc to the circumference. • Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean discs.
In this system, SD cards are used for playing back MP3/WMA music data, importing/exporting data (Skin, Image, Album Information, Extra POI), and backing up/restoring the user data (Stored Locations, system settings, etc.). Owner’s manual Note: • Use the SD memory cards formatted in FAT16 or VFAT format. The SDHC cards are cannot be used. Setting an SD card 1. Press the [7 OPEN/CLOSE] button to open the operation panel. 2.
English Selecting Media Source You can change the media source to be played from the Source menu screen. Owner’s manual 1. Press the [SRC] (Source) button to display the Source menu screen. 2. Touch the desired Source key you wish to change to. The system is switched to the corresponding source mode. When you pressed the [SRC] (Source) button from the AV mode, the corresponding AV mode menu screen will be displayed. When you pressed it from the Navigation mode, the previous screen will be displayed.
Setting the 2Zone function The 2Zone function is a function that assigns separate source output to the Front zone (this unit) and Rear zone (the optional rear monitor) by simultaneously playing two sources in this system. Therefore, the rear passengers are allowed to enjoy a different video source from the source played on the monitor of this unit.
English 3. Operations of Basic Features Radio Operations Owner’s manual In addition to the ordinal tuner functions, this unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data.
Radio Operations ● From the AV Shortcut menu Manual memory 1. Select the desired band by touching the [Band] key. 2. Select the desired station with the seek tuning, manual tuning, or preset tuning. 3. Touch and hold one of the Preset key for more than 2 seconds to store the current station into the preset memory. Manual tuning There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time.
Radio Operations English Preset scan Owner’s manual The Preset Scan receives the stations stored in the preset memory in order. This function is useful when searching for the desired station in memory. 1. Touch the [PS] key to start the Preset Scan. The unit starts scanning each station for 7 seconds sequentially. 2. When the desired station is tuned in, touch the [PS] key again to continue receiving that station.
Radio Operations English PTY (Programme Type) function The AF function switches to a different frequency on the same network in order to maintain optimum reception. This function enables you to listen to a broadcast of the specified programme type when the broadcast starts, even if the system operates in a mode other than the Tuner mode. • Some countries do not yet have PTY broadcast. • In the TA standby mode, a TP station has priority over a PTY broadcast station. Switching ON/OFF the AF function 1.
Radio Operations English PTY seek PTY item Owner’s manual 1. Touch the [Option] key. 2. Touch the [Preset] or [Item] key of the PTY Select item. 3. Touch your desired Programme Type key. 4. Touch a Seek key. If you touch the [K] key or [x] button, this unit seeks a PTY broadcast moving up the frequencies. If you touch the [k] key or [X] button , it seeks moving down the frequencies. • If no station with the selected PTY broadcast can be received, the unit returns to the previous mode.
Multi-story function This unit provides the following functions in addition to the high image quality and sound quality of DVD video. When a DVD video contains more than one story for a film, you can select the story you wish to enjoy. The operation procedures vary with the disc; observe the instructions for selecting a story provided during playback. Note: • The functions described in this section differ depending on the DVD video disc. Refer to the instructions provided with the DVD video.
DVD Video Operations English ● When a DVD video disc is already set Owner’s manual 1. Press the [SRC] (Source) button to display the Source menu screen. 2. Touch the [DVD/CD] key to select the DVD Video mode. The system changes to the DVD Video mode, and starts playback from the previous position. Changing the DVD System Settings Note: • If the Setup operation is performed in the middle of DVD video play, the disc will restart from the beginning.
DVD Video Operations You can set up so that the angle mark appears on scenes where the angles can be switched. 1. Touch the [Angle] key. 2. Touch the [ON] or [OFF] key to turn the Angle function “ON” or “OFF”. • The factory default setting is “OFF”. 3. Touch the [Back] key. ● When watching through a wide type of the rear view monitor (16:9) Setting up the disc menu language Wide: 1. Touch the [Menu Language] key. 2. Touch the desired Language key you wish to set.
DVD Video Operations English Setting up the country code Country Owner’s manual Set up the country number for setting up of the parental level. 1. Touch the [Locale] key. 2. Touch the ten-key (0 to 9) to input a 4-digit country code (see the following table). • The factory default setting is “7166” (U.K.). 3. Touch the [OK] key.
DVD Video Operations You can change the screen size to suit to the playback film. • This operation cannot be performed from the AV Shortcut menu screen. 1. Showing the DVD Video mode screen, touch the [ ] key. 2. Touch the [Wide], [Cinema], or [Normal] key to set the desired screen size. • The factory default setting is “Wide”. Wide: The image is expanded so that the rectangle of the image fits to the screen. The aspect ratio of the image may be changed.
DVD Video Operations English Owner’s manual ● Operating the DVD menu (Key Pad) Slow playback When the menu items are hard to select correctly, you can also operate them by displaying the Key Pad panel. • When the Key Pad is displayed, Direct Touch operation of the button items is disabled. 1. Press the [OUT] (Zoom Out) or [IN] (Zoom In) button. The Cursor-Key Pad panel is displayed on the screen. • Touching the [Num] key changes the panel to the Numeric-Key Pad. 1.
DVD Video Operations Scans and plays back all chapters recorded on the disc, the first 10 seconds for each. • This operation cannot be performed from the AV Shortcut menu screen. 1. Showing the DVD video mode screen, touch the [Option] key. 2. Touch the [Chapter] key of the Scan item, then touch the [Back] key. The “C.SCN” will be displayed. After scan playback of all chapters on the disc, chapter scanning through the same disc is performed again.
DVD Video Operations English Owner’s manual • Depending on the disc, switching may be completely impossible or impossible on some scenes. • It may take time to switch among audios. 3. Touch the [Back] key to return to the previous screen. Switching subtitles On DVD discs in which two or more subtitle languages have been recorded, you can switch among the subtitle languages during playback. • This operation cannot be performed from the AV Shortcut menu screen. 1.
This system can play MP3/WMA data recorded on a disc or saved in an SD card. Precautions when preparing a disc/ SD card What is MP3/WMA? ● Logical format (File system) MP3 and WMA are the audio compression methods which have penetrated into PC users and become a standard format. MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. WMA is an audio compression method developed by Microsoft Corporation.
MP3/WMA Operations English Selecting the MP3/WMA mode Owner’s manual The MP3/WMA mode is actually separated in CD mode or SD Card mode, and the selecting methods differ depending on the media source. MP3/WMA mode screen Folder name Track list pane Selecting the CD mode 1. Set a disc which the MP3/WMA data is recorded to the DVD player. The system will automatically read the disc data, change to the CD mode (MP3/WMA mode), and start playback after a while. ➜ “Setting/Ejecting a Disc” (P.
MP3/WMA Operations Displaying Tag information of a track 1. Touch the [List] key to display the Folder list screen. 2. Touch the desired Folder key. The Track list screen appears. 3. Touch the desired track key you wish to display the Tag information, then touch the [ ] key displayed at the right of the Track key. The Tag information of specified track is displayed. Fast forward and fast backward 1. Keep pressing the [R] or [F] (Search) button during playback. The playback speed becomes 10-times faster.
MP3/WMA Operations English Other various play functions Owner’s manual • This operation cannot be performed from the AV Shortcut menu screen. 1. Touch the [Option] key. The Option menu screen is displayed. 2. Touch a touch key of the function you want to play. Folder scan playback: Touch the [Folder] key of the Scan item. • This operation scans and plays back the first tracks of all folders in the disc/card, the first 10 seconds for each. • “F.SCN” is displayed on the information pane.
● About the track information of the recorded data When the track information can be obtained from the Album Information data, this data is used as the track information. If not, the album title is named using the recording date and a consecutive number (such as “2008. 6. 10-001”), and the track title is named such as “Track 01”. You can edit this information in the Music Catcher mode. ➜ “Editing album/track information” (P.
Audio CD Operations English Owner’s manual Audio CD operations Displaying track information of a track Selecting a track to play 1. Touch the [List] key to display the Track list screen. 2. Touch the desired track key you wish to display the track information, then touch the [ ] key displayed at the right of the Track key. The track information of specified track is displayed. • This operation cannot be performed from the AV Shortcut menu screen. 1.
Audio CD Operations With the factory default setting, all tracks on a CD are automatically recorded when the first time setting the disc into the DVD player. You can also change this setting to the setting of which the recording is not performed automatically, but it is performed manually. • This operation cannot be performed when all the tracks on the CD is already recorded. 1. Set the audio CD you wish to record into the DVD player. The Audio CD mode screen is displayed. 2. Touch the [REC] key.
English Music Catcher Operations What is the Music Catcher? Owner’s manual The audio data recorded from the audio CDs are stored in the Music Catcher. By selecting the Music Catcher mode, you can manage the great number of recorded audio data efficiently, and can play back these data. Music Catcher mode screen Album/Playlist title Track list pane ● Recordable number of albums or tracks • • • • Up to 500 albums can be recorded. Up to 99 tracks can be included in an album.
Music Catcher Operations Displaying information registered for the album/playlist/track 1. Display the item key of the album/playlist/ track you wish to display information. • Touch the [List/Edit] key to display the Album list screen or Playlist screen. • Moreover, touch desired Album/Playlist key to display the Track list screen. • Touch the [c] or [C] key to scroll the list. 2. Touch the [ ] key displayed at the right of the desired item key. The information of specified item is displayed.
Music Catcher Operations English Editing album/track information Owner’s manual You can edit album/track information from the information screens. ➜ “Displaying information registered for the album/playlist/track” (P. 41) Note: • This operation is disabled while recording a CD or loading/ejecting a disc. To edit the information of the album/tracks currently recording, once exit the Music Catcher mode, then enter again after the recording completes. 1.
Music Catcher Operations Displaying the Music Search screen 1. Touch the [Search] key. The Music Search screen is displayed. • This screen can also be opened by touching [Music Search] key from the Destination menu screen. Note: • This operation is disabled while recording the first track of a CD or loading/ejecting a disc. 1. Touch the [Albums] key on the Music Search screen. The Album list is displayed with the order of recorded date. 2. Touch the desired Album key you wish to play back.
Music Catcher Operations English Owner’s manual Searching by Genre Searching by Playlist 1. Touch the [Genres] key on the Music Search screen. The Genre list is displayed. 2. Touch the desired Genre key you wish to search data. The Artist list of the specified genre is displayed. • Touch the [c] or [C] key to scroll the list. 3. Touch the desired Artist key you wish to search data. The Album list of the specified artist is displayed with the order of recorded date.
Music Catcher Operations 7. 8. Editing a Playlist You can edit the playlist from the information screens. ➜ “Displaying information registered for the album/playlist/track” (P. 41) 1. Select the playlist you wish to edit information using the Music Search function. 2. Touch the [List/Edit] key to display the Playlist list screen. From this screen, you can perform the following operations. 3. Touch the [ ] key displayed at the right of the desired Playlist key.
English Using Recent Album List What is Recent Album list? Owner’s manual The Recent Album list is one of the following 3 shortcut lists: (see the Navigation Manual for details of the Favourite list and Frequent list) • Favourite list: You can register your favourite places. • Frequent list: Destinations frequently entered are automatically registered. • Recent Album list: Albums recently selected from the Music Search are automatically registered.
English 4. Operations of Accessories TV Tuner Operations TV Tuner mode screen Watching TV requires a TV tuner. When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. Touching the TV screen displays the following TV Tuner mode screen. Preset key pane ● About the VTR input terminal The TV tuner has a VTR input terminal to which 1 external device can be connected.
TV Tuner Operations English Basic operations Watching TV Owner’s manual Note: • For your safety, this system has a safety function which turns off the picture when the car is moving, so only the audio can be heard. The picture can only be watched when the car is stopped and the parking brake is applied. 1. Touch the screen to display the TV Tuner mode screen. 2. Touch the [Band] key to select the desired TV band (TV1 or TV2). Every touching this key toggles the TV band between TV1 and TV2. 3.
TV Tuner Operations Auto store Auto store selects 6 TV stations automatically and stores each one into a preset memory. If 6 stations cannot be received with good reception, previously stored stations remain and only the strong stations are stored into memory. 1. Touch the screen to display the TV Tuner mode screen. 2. Touch the [Band] key to select the desired TV band (TV1 or TV2). 3. Touch and hold the [AS] key for more than 2 seconds.
English AUX Operations This function is available when the TV tuner is not connected via CeNET, and a visual device, such as VTR, is connected to this unit by using the RCA pin lead. WARNING Owner’s manual • For your safety, the driver should not watch the VTR, etc. or operate the controls while driving. Please note that watching and operating the VTR, etc. while driving are prohibited by law in some countries.
This unit can be used to control a connected Apple iPod (for the information on the compatible models, see the Clarion homepage (http://www.clarion.com)). Use the optional connector cable to connect the iPod. Notes regarding use of Apple iPod • After the iPod has been connected to this unit, the iPod’s buttons are disabled for operation.
iPod Operations English Controlling the iPod Operation keys Owner’s manual [MENU] key ([Menu] key on the AV Shortcut menu) • Displays the iPod Menu screen which is used to access to the list screens of the Albums, Tracks, Artists, Genres, Playlists, Podcasts, Composers, and Audiobooks stored in the iPod. [R], [F] key ([X], [x] key on the AV Shortcut menu) • Use to perform track search operation. Touch and hold the key to enable fast-forward or fastbackward. [6] key • Use to perform playback and pause.
iPod Operations Selecting the track of starting playback 1. Displaying the Track List screen, touch the desired Track key you wish to play. The system starts playback from the specified track. • Touch the [c] or [C] key to scroll the list. 2. Touch the [Back] key to return to the previous screen. Displaying the track information 1. Displaying the Track List screen, touch the desired Track key you wish to display information. • Touch the [c] or [C] key to scroll the list. 2.
iPod Operations English iPod Menu operation You can specify the album to play by narrowing the following categories: Owner’s manual Albums: The album list of all the albums recorded in the iPod is displayed. Artists: You can narrow the albums to be listed by specifying the artist name. Genres: You can narrow the albums to be listed by specifying the genre and artist name. Composers: You can narrow the albums to be listed by specifying the composer name.
iPod Operations English Note: • The [Video] key is displayed only when a fifth generation iPod is connected to the unit. Owner’s manual 3. Play back your desired video data or slideshow data from the iPod. The specified video data will be displayed on the information pane. 4. Touch the information pane. The video data will be displayed on the whole screen. Note: • “Audio Only” is displayed when the motorcar is moving. 5. To return to the iPod mode screen, touch the screen. 6.
English Telephone Operations Owner’s manual This function is enabled when the optional Bluetooth Interface Box is connected to this unit via CeNET. The following functions are available: • Listening to your telephone calls on the car speakers. • Making a call using the Ten-Key pad screen, or using the Phone Book or Dialled/Received/Missed calls records in the selected mobile phone.
Telephone Operations This system can generate a ring tone if the ring tone of the mobile phone cannot be used. You can adjust the volume of the ring tone in 8 levels. • The factory default setting is “0”(OFF) 1. Touch the [–] or [+] key of the Ring Tone Volume item to adjust the volume level. Setting the telephone features 1. Touch the [Phone Settings] key to display the Phone Settings screen.
Telephone Operations English Owner’s manual • Touch the [Private] key to talk using the mobile phone cancelling the hands-free function. To return to the hands-free mode, touch the [HFS] key. • Touch the [Mic Mute] key to turn off the microphone so that the sound does not be heard by the partner. 4. When the call is finished, touch the [ ] key to hang up. The display returns to the Telephone mode screen.
If the optional CCD rear camera is installed in this system, the rear view image is displayed on the screen when the gear lever is put in the reverse gear position. In addition, this system can display guidelines on the camera image, which helps you to perceive the size of the vehicle. Note: • The CCD camera image is not displayed on the rear monitor. You can adjust the position of the guidelines so that the size of the vehicle is represented. 1.
English Rear Monitor Operations By installing the optional rear monitor in this system, the rear passengers can enjoy visual sources played on the main unit (this unit). Moreover, they can enjoy the visual sources different from the media sources played on the main unit by using the 2Zone function. ➜ “2Zone Function” (P. 19) Owner’s manual Note: • When 2Zone function is turned on, use the optional infrared headphone systems to listen to the Rear zone sound.
English Remote Control Operations You can use the optional remote control unit to control the AV features of this unit. Name of the Buttons Owner’s manual Signal transmitter Operating range: 30° in all directions [SUBTITLE] [AUDIO] [ANGLE] [MENU] [TOP MENU] [E], [e], [T], [t] [ENT] [RETURN] [SOURCE] [BAND] [–], [+] [6] [R], [F] Inserting the Battery 1. Slide the rear cover in the direction of the arrow, and remove it. 2.
Remote Control Operations English Functions of the Buttons • When the 2Zone function is ON, the controls work upon the Rear zone only. Owner’s manual [AUDIO] button • Press to set the Audio language. (in DVD Video mode) [SUB TITLE] button • Press to display subtitles. (in DVD Video mode) [ANGLE] button • Press to set the Angle function of the DVD video when the Angle mark is displayed. (in DVD Video mode) (Available only when the Angle function on the DVD Setup menu is set to ON.
English 5. System Setting You can set various settings of this system from the Setting menu. Owner’s manual Setting menu screen 1 Setting menu screen 2 1. Press the [ ] (Set) button. The Setting menu screen is displayed. Touching the [ ] (Next) key displays the additional Setting menu screen. 2. Touch the desired menu item. For the operation procedure hereinafter, see the explanation of each section. Note: • For details about the Screen Colour item, see “Setting the Screen Colour mode” (P.
General Settings English Owner’s manual “Time Zone”: Sets the time zone. You can select from the list of 74 regions including the [Auto] key. When you select the [Auto] key, the clock is automatically switched to the time zone of the country at the vehicle position. Changing Skin You can change the screen design by using the skin data stored in the hard disk drive. 1. Touch the [Select] key of the “Skin Change” item. 2. Touch the desired item key you wish to set.
General Settings English 1. Enter your Personal Code currently set. When the correct Personal Code is entered, the unit will restart from the initial startup screen. Owner’s manual Note: • When you enter a wrong Personal Code, the message “Code incorrect” is displayed and the Personal Code entry is prohibited for a while.
When you touch the [Navigation] key from the Setting menu, you can set various setting concerning the navigation system. For details, see the Navigation Manual. When you touch the [Audio] key from the Setting menu, you can set various settings concerning the audio features. Adjusting the balance/fader e 1. Touch the [Edit] key of the BAL/FAD item. 2. Touch the [E] or [e] key to adjust the fader level. • The factory default setting is “0”.
English Adjusting the Monitor Setting the Screen Colour mode Owner’s manual The system has two Screen Colour modes: the Day mode and the Night mode. Each Screen Colour mode has the own dimmer level setting. To switch to the Day mode or Night mode manually, touch the [Day] or [Night] key of the Screen Colour item on the Setting menu. When the [Auto] key is selected, the Screen Colour mode is automatically switched according to whether the illumination of the vehicle is turned off or on.
English User Settings When you touch the [User] key from the Setting menu, you can register User Profiles to personalise Favourite/Frequent/Recent Album list data. • Up to 4 User Profiles can be registered. Owner’s manual Registering the User Profile 1. Touch the desired [(Add New)] key you wish to register. A confirmation screen is displayed. 2. Touch the [Yes] key. The Name entry screen is displayed. 3. Enter desired name of the User Profile by touching the characters on the screen.
User Settings English 7. When editing User Profile completes, touch the [Back] key to return to the previous screen. Owner’s manual Deleting the User Profile Note: • You cannot delete the current User Profile. Delete it after switching to another User Profile. 1. Touch the [Delete] key of the Delete User item. The Delete User screen is displayed. 2. Touch the desired User Profile key you wish to delete. A confirmation screen is displayed. 3. Touch the [Yes] key to delete the selected User Profile.
English Setting Stored Data From the Stored Data menu, you can register/edit various data used in the navigation system. For details, see the Navigation Manual. Owner’s manual Importing Data Using the SD Card From the Import Data menu, you can import the downloaded data from the website. For more information about the installation method and the function, see the Clarion homepage. 1. Touch the [ ] (Next) key from the Setting menu. 2. Touch the [Import Data] key to display the Import Data menu.
Importing Data Using the SD Card English Extra POI Owner’s manual You can import the Extra POI data stored in the SD card into the hard disk drive. Touch the [Import] key of the “Extra POI” item, then operate according to the displayed messages. To delete the data imported to the hard disk drive, touch the [Delete] key. Safety Camera You can import the location database of Safety Cameras stored in the SD card to the hard disk drive.
English Service Options From the Service Option menu, you can perform the operation such as displaying a demonstration of the navigation system, backup or restore of stored data, and resetting to the factory settings. Owner’s manual 1. Touch the [ ] (Next) key from the Setting menu. 2. Touch the [Service Option] key to display the Service Option menu.
From the Safety Camera menu, you can set the Safety Camera. Note: • These settings are enabled when the Safety Camera data is stored in the hard disk. ➜ “Safety Camera” (P. 71) MAX983HD 73 Owner’s manual 1. Touch the [ ] (Next) key from the Setting menu. 2. Touch the [Safety Camera] key to display the Safety Camera menu. 3. Touch the desired menu item to set. “Show Icon on Map”: Turns ON/OFF the Safety Camera Icon display on the map.
English 6. Others Voice Command Operations Owner’s manual This system has built in voice recognition function. You can perform fundamental operations by saying the corresponding voice commands. • For details of the operations, see the Navigation Manual. List of the Voice commands (AV features) The following table lists the fundamental command examples available to control the AV features. Note: • You can omit the term enclosed by ( ).
Problem Cause English Troubleshooting Remedy General Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power and open the operation panel. Press the Reset button with a thin rod. Display is not accurate.
Troubleshooting English Problem Cause Remedy TV Tuner (When the optional TV tuner is connected) Owner’s manual The image is not displayed. The parking brake is not engaged. Check that the parking brake is engaged. The display is dark. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0°C or lower. Set to an appropriate temperature (25°C or so) and check it again.
Problem Cause English Error Messages Remedy DVD Player A disc is caught inside the DVD player and is not ejected. This is a failure of DVD player’s mechanism. Please consult your store of purchase. DISC ERROR A disc cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc. A disc is loaded up-sidedown inside the DVD player and does not play. Eject the disc then reload it properly.
Video Output Mode: Microstrip flat aerial Dimension: 30.4 (W) u 11.7 (H) u 35.5 (D) mm Impedance: 50 Ohm Video output: 1.0 r0.2 Vp-p (output impedance 75 :) Navigation System GPS receiving frequency: 1575.42 MHz, C/A Code Sensibility: –130 dBm or better Number of GPS channels: 15 channels FM Tuner Frequency Range: 87.50 MHz to 108.
English INSTALLATION AND WIRE CONNECTION MANUAL INSTALLATION AND WIRE CONNECTION MANUAL Safety Precautions Before use CAUTION WARNING • Confirm the battery voltage of the vehicle to be installed. This unit is designed only for vehicles with DC 12V power supply. • Disconnect the negative terminal of the battery before connecting wires, otherwise an electric shock, injury by short circuit may occur.
Safety Precautions English Wire connection notes WARNING INSTALLATION AND WIRE CONNECTION MANUAL • Loom all cables according to the instruction manual so as not to hinder operation. • Wire the connecting cables away from high temperature areas. If the coatings of the cables melt, it may cause an accident/ fire by a short circuit. Take care when wiring in the engine compartment.
1 8 3 9 Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . 1 GPS antenna . . . . . . . . . . . . . . . . . . . . . . . 1 Power supply lead . . . . . . . . . . . . . . . . . . . 1 Vehicle signal lead . . . . . . . . . . . . . . . . . . 1 RCA pin lead . . . . . . . . . . . . . . . . . . . . . . . 1 Microphone for voice control . . . . . . . . . . 1 5 4 0 7 8 9 0 ! @ ! INSTALLATION AND WIRE CONNECTION MANUAL 7 6 1 2 3 4 5 6 2 @ Microphone extension lead . . . . . . . . . . .
English Installing the Main Unit Cautions on Installation INSTALLATION AND WIRE CONNECTION MANUAL 1. Prepare all parts necessary for installing the main unit before starting. 2. This model features an operation panel that slides forward. On some types of cars, the operation panel may make contact with the dashboard or gear lever, in which cause it cannot be installed.
Installing the Main Unit English Installing the Main Unit INSTALLATION AND WIRE CONNECTION MANUAL This unit is designed for fixed installation in the dashboard. 1. When installing the main unit in NISSAN vehicles, use the parts attached to this unit. When installing the main unit in TOYOTA vehicles, use the parts attached to the vehicle. 2. Wire as shown in the section “Wire Connection”. 3. Reassemble and secure the unit in the dashboard and set the face panel and centre panel.
Installing the Main Unit English Installing the main unit in a TOYOTA Vehicle Install by using parts attached to the vehicle. (Screws marked ★ are attached to the vehicle.) INSTALLATION AND WIRE CONNECTION MANUAL Main Unit 8–Hexagonal screw (M5 u 8) Centre Panel (* 1) Mounting bracket (1 pair for the left and right sides) (* 2) Note: *1: Some panel openings are too small for the unit depending on the vehicle type and model.
WARNING Note: • The supplied GPS antenna is for installing inside the vehicle. Do not install it outside the vehicle. • Install the GPS antenna more than 50 cm away from the main unit, other audio devices such as CD player, and a radar detector. If it is installed near these devices, GPS reception may be impaired. • It is recommended that the GPS antenna is sited towards the centre of the road where GPS signal interruption is minimised.
English Installing the Microphone for Voice Control Note: • Wipe off the dirt of the mounting surface before installing the microphone. INSTALLATION AND WIRE CONNECTION MANUAL 1. 2. 3. 4. 5. Stick the double-sided tape to the bottom face of the microphone. Attach the microphone on a flat surface of the steering column or dashboard close to the driver. Turn the microphone towards the mouth of the person who operates the system. Connect the microphone extension lead to the microphone as required.
English Wire Connection WARNING INSTALLATION AND WIRE CONNECTION MANUAL • Disconnect the negative terminal of the battery before connecting wires, otherwise an electric shock, injury by short circuit may occur. • Be sure to read the section "Wire Connection Notes" before installation or connection operations. Note: • For the optional devices, use the RCA pin cable and other connector cables sold separately.
Wire Connection English Power supply lead INSTALLATION AND WIRE CONNECTION MANUAL B-2 B-3 B-5 B-4 B-1 B-6 1 B-7 B-8 A-7 A-8 A-6 10A ∗1 No.
Wire Connection English Connecting to the CCD camera for vehicle Connect the CCD camera for vehicle to the CCD camera terminal on the main unit. For detailed information, refer to the instruction sheet or manual for the CCD camera. Notes on wire connection When connecting the plugs and sleeves, be sure to insert the plug until it locks securely. After completing connections, fasten the leads using lead clamps and tapes. Cut 5 mm.
Wire Connection English Example of relay usage Use a special installation kit (relay lead kit), sold separately, prepared specifically for your model. For applicable models, consult the dealer where you purchased this unit. INSTALLATION AND WIRE CONNECTION MANUAL Note: • When connecting the main power supply lead (yellow) of the main unit, connect it to a spare terminal of this unit.
Owner’s manual (Audio, Visual, General & Installation) Mode d’emploi (Audio, vidéo, fonctionnement général et installation) Benutzerhandbuch (Lyd visuel, generelt og installation) Manuale dell’utente (Audio, video, generali e installazione) Gebruikershandleiding (Audio, visueel, algemeen en installatie) Guía de usuario (Imagen, sonido, general e instalación) Ägarhandbok (Ljud, Sikt, Allmänt & Installation) Manual do utilizador (Áudio, Visual, Geral e Instalação) Brugervejledning (Audio, Video, Allgemein und
