Installation manual

1. Before You Begin
Prior to beginning the installation of the Ungo MS2100, be sure that you have
completely read and understand this installation manual.
Verify all the vehicle's functions work properly prior to installation (i.e.: power
windows, power door locks, climate controls, radio, etc.)
Check with the vehicle’s owner on the location of the status LED and valet
switch.
Protect the vehicle by using fender and seat covers.
Double-check the location before drilling. Make sure that there are no wire
looms, hoses, or other obstructions. Failure to verify can result in serious
damage to the vehicle.
Roll down a window(s) before beginning installation, to prevent getting locked
out of the vehicle.
Set the Polarity Jumper inside the main unit for the Parking Lights.
Warning: Probing wires with a Test Light can result in serious damage to the
vehicle's electrical system and/or deploy air bag system.
2. After The Installation is Complete
Verify all the vehicle's functions work properly after the installation (i.e.: power
windows, power door locks, climate controls, etc.).
Test all functions of the vehicle security system and make any changes to the
system parameters if necessary.
3. System Contents
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Remote Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
12-Pin Main Harness . . . . . . . . . . . . . . . . . . . . . . . . . .1
2-Pin Status LED Harness . . . . . . . . . . . . . . . . . . . . . . .1
2-Pin Valet Switch Harness . . . . . . . . . . . . . . . . . . . . . .1
3-Pin Door Lock Harness . . . . . . . . . . . . . . . . . . . . . . .1
4-Pin Shock Sensor Harness and Shock Sensor . . . . .1
14 Gauge wire with insulated female .250 connectors . .1
Window Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Owner's Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installation Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
-2-
ms2100.qxd 4/29/2003 3:51 PM Page 2