Installation manual

-5-
5.4 Valet/Override Switch
Prior to drilling the hole for the valet switch, make sure the switch is well hidden and
can't be easily hit. Also, verify there is adequate space behind the valet switch to
accommodate for the depth of the switch.
5.5 Status LED
Mount the status LED so that it is visible from both sides of the vehicle, if possible.
Make sure there is adequate space behind the LED to accommodate for the depth
of the LED.
6. Remote Transmitter Layout
Auxiliary 1
Arm/Lock
Disarm/Unlock
No Function
ms2100.qxd 4/29/2003 3:51 PM Page 5