Installation manual

-9-
12. System Programmable Parameters
12.1 Parameter Descriptions
1. Ignition Controlled Door Locking: Selects whether or not the doors will lock
when the ignition is turned On. Ignition Controlled Door Locks will automatically
lock the doors 10 seconds after the ignition is turned On. To prevent the keys
from being locked inside the vehicle; the security system will not lock the doors
if any of the doors is open when the ignition is turned On.
2. Ignition Controlled Door Unlocking: Selects whether or not the security
system the doors will unlock when the ignition is turned Off. Ignition Controlled
Door Unlocking can be configured to unlock all the doors or driver's door only.
3. Door Unlock Pulse: Selects between single or double door unlock pulse.
4. Door Lock Pulse Width: Selects between a 1-second or 3-second door lock
pulse.
5. Passive Locking: Selects whether or not the door locks will automatically lock
with Auto Rearming and Passive Arming.
6. Door Entry Delay with Passive Arming: Selects whether or not the door
trigger input will be delayed for 15 seconds, allowing access to the Override
switch. The door trigger is delayed only when the system arms passively.
1. Ignition Controlled Door Locking On Off
2. Ignition Controlled Door Unlocking On Off
3. Door Unlock Pulse Single Double
4. Door Lock/Unlock Pulse Width 1 Second 3 Seconds
5. Passive Locking Off On
6. Door Entry Delay w/ Passive Arming Off On
7. Ignore Dome Light Delay Off On
8. Auto Rearm Off On
9. Horn Honk / Alarming Output Pulsing Continuous
10. Trunk Disarm Feature Off On
11. Siren / Horn Chirps Siren Horn
12. Horn Output / Passenger Unlock Horn Output Passenger Unlock
13. Arming Chirps Normal Silent
Feature Button 1 (default) Button 2
ms2100.qxd 4/29/2003 3:51 PM Page 9