VRX848RVD/VRX743R Owner’s manual / Mode d’emploi Bedienungsanleitung / Istruzioni per l’uso Gebruiksaanwijzing / Manual de instrucciones Bruksanvisning / Manual de instruções VRX848RVD RADIO/DVD MULTIMEDIA CENTER WITH CeNET CONTROL CENTRE MULTIMÉDIA DVD/RADIO AVEC COMMANDE CeNET RADIO/DVD-MULTIMEDIA-CENTER MIT CeNET-STEUERUNG CENTRO MULTIMEDIA RADIO/DVD CON CONTROLLO CeNET RADIO/DVD MULTIMEDIACENTER MET CeNET BEDIENING CENTRO DE MULTIMEDIA DE DVD/RADIO CON CONTROL CeNET RADIO/DVD MULTIMEDIACENTER MED CeNE
CAUTIONS: VRX848RVD This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AUTHORIZED service station”. To prevent direct exposure to the laser beam, do not try to open the enclosure.
: Manual indication : Stereo indication : AF (Alternative frequency) indication : REG (Regional programme) indication : TA (Traffic announcement) indication : MAGNA BASS-EX indication : INFO (Information) indication (DAB mode only) : TP (Traffic programme) indication : PTY (Programme type) indication : ALL indication : Scan indication : Repeat indication : Random indication : Preset channel indication Disc number indication ∗The disc numbers corresponding to the discs in the DVD or CD changer light.
Français [FRONT OPEN] [SENSOR] [DISP] [TA] Deutsch [s] [DIRECT] [OPEN] [ADJ] Italiano With the Front panel open / Avec le panneau avant / Bei geöffneter Frontklappe / Con pannello anteriore aperto Met het voorpaneel open / Con el panel frontal abierto / Med frontpanelen öppen / Com o painel frontal aberto Names of Buttons Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
English Color LCD Display Mode name Owner’s manual •Radio mode : FM1 CLASSICS Pch 1 (band/PTY name being received/preset No.) •DAB mode : M1 CLASSICS Pch 1 (band/PTY name being received/preset No.) •DVD changer mode: D2 T02 C002 01:08:20 (disc No./title No./chapter No./playback time) •DVD video mode : T01 C003 00:08:20 (title No./chapter No./playback time) •Video CD mode : T01 00:01:18 (track No./playback time) •MP-3 mode : F001 T001 00:04:07 (folderNo./track No.
English 6. OUTLINE OF BUTTON AND TOUCHKEY OPERATION Owner’s manual ∗2 ∗1 Engine ON position System check The CeNET format utilized on this unit is provided with a system check function. The operation panel’s system check menu is displayed under the following conditions: • When power is first turned on after initial installation. • When an external device is connected or disconnected. • When batteries are changed or otherwise when power is disconnected. • When reset button is pressed.
English (Radio mode screen) Owner’s manual (Next page) (SUB menu) (LIST screen) ∗3 ∗4 Notes: ∗1: The operation button is [OPEN] button in the description of operation per mode. ∗2: External equipment not connected with CeNET is not displayed. ∗3: Touch the [RTN] key to return to the previous screen. ∗4: Touch the [ESC] key to return to the main screen.
English (Radio mode screen) Owner’s manual (FUNCTION menu) ∗5 ∗6 ∗7 (DVD mode screen) ∗8 (SUB menu) Notes: ∗5: The FUNCTION menu screen displays icons for components connected to the main unit. The icons serve as touch keys for selecting play modes. ∗6: Pressing the [FUNC] button changes to the following play modes. ∗7: When displaying images in DVD mode, touching the screen surface will cause the menu screen to be displayed. (DVD mode is a function included only with the VRX848RVD.
English Owner’s manual (Next page) (ADJUST MODE menu) (DVD SETUP menu) (MONITOR menu) MONI ADJ PARENRTAL LEBEL VRX848RVD/VRX743R 13
English Owner’s manual (ADJUST MODE menu) When a 5.
English Owner’s manual (AUDIO MODE menu) (AUDIO EXT.
English 7. REMOTE CONTROL Remote control unit Owner’s manual Signal transmitter Operating range: 30˚ in all directions [BAND] [MUTE] [FUNC] [VOLUME] [P.TIME] [0-9] [DISP] [ ],[ ] [SEARCH MODE] [MENU] [RTN] [DVD TITLE] [SET UP] [ENT] [RPT] [ ],[ ] [TA] [SCN] [RDM] [AUDIO] [PBC] [SLOW] [ANGLE] [SUB TITLE] Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2.Insert the AA (SUM-3, IECR-6/1.
● Shared modes • Switches among radio, TV, etc. [BAND] button ∗ Can not turn power on or off. [MUTE] button • Turns mute on and off. [VOLUME] button • Increases and decreases volume. [DISP] button • Press to change display on information panel (MAIN ➞ SUB ➞ Clock Time) [TA] button • Press to return to the first chapter in DVD video mode. • Press to return to the first track in CD/MP-3 mode or video CD mode with the PBC function turned off. [P.
English Functions of Remote Control Unit Buttons [w], [z], [Å], [Î] buttons • Press to select menus and other items during DVD video playback. Owner’s manual [ENT] button ● CD changer mode [BAND] button • Press to switch discs. • Press to confirm numerics entered in the KEY PAD operation screen. [ [a], [d] buttons [0 - 9] buttons • Press to select the next higher or lower chapter number in DVD video mode.
Removing the DCP 1. Press the [FUNC] button for 1 second or longer to turn off the power. CAUTION Be sure to close the HOLD FLAP for safety when removing the DCP. Attaching the DCP 1. Insert the right side of the DCP into the main unit. 2. Insert the left side of the DCP into the main unit. [FUNC] button DCP [FRONT OPEN] button 2. Deeply push in [FRONT OPEN] button to unlock the front panel. ∗ If the front panel does not open fully, gently open it with your hand. DCP 3.
English 9. CAUTIONS ON HANDLING Liquid crystal panel/Generalities Owner’s manual For a longer service life, be sure to read the following cautions. • Be sure to store the liquid crystal panel inside the main unit when parking the car outdoors for long period of time. The liquid crystal panel will operate properly in a temperature range of 0 to 60˚C. • Don’t allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry.
Storage • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters. Ball-point pen Cleaning Roughness • Never stick labels on the surface of the disc or mark the surface with a pencil or pen.
English 10. DVD VIDEO SYSTEM (VRX848RVD only) Owner’s manual DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc contains either one film or four hours of music. DVD Video Features This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Notes: • The functions described in the section, “Features”, for example, the recorded language, subtitles, angles, etc. differ with the DVD video disc.
Discs TV color system Playable discs DVD video discs video CDs CD TEXT Audio CDs About MP3 playback Owner’s manual This DVD video player can play the following discs. English Playable discs This DVD player plays NTSC or PAL discs only and cannot be used for playback of SECAM discs. This unit can play back CD-R/CD-RW discs on which MP3 music data have been recorded. For a detailed information, see the page entitled “Listening to an MP3”. About the registered marks etc.
English 11. OPERATIONS Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Owner’s manual CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Note: • Use this unit after starting the engine. Adjusting the volume 1.
Opening and turning the liquid crystal panel Standing up the liquid crystal panel 1. Press the [OPEN] button and the liquid crystal panel comes out and stand up automatically. The liquid crystal panel’s maximum angle of inclination can be adjusted to match the installation configuration within the automobile. • Perform this with the panel in its closed position. 1. Deeply push in [FRONT OPEN] button to unlock the front panel. 2.
English Basic Operations Housing the liquid crystal panel Owner’s manual 1. Press the [OPEN] button and the liquid crystal panel is housed automatically. Note: • When leaving this unit unused for a long period of time or leaving your car, be sure to house the liquid crystal panel into the main unit. Turning the liquid crystal panel horizontal (Air conditioner operation mode) Adjusting the AUDIO Note: • When the separately-sold 5.
● Adjusting the TREBLE The treble gain and treble frequency (center frequency) can be adjusted as follows. 2-1. Touch the [TREBLE] key. 2-2. When the bass type selection screen is displayed, touch the key for the desirable type to select it. 2-3. Touch the [w] or [z] key to adjust to desirable level. GAIN : –6 to 6 (The factory default setting is “0”) FREQ.
English Basic Operations Owner’s manual ●Warning display when CCD camera is installed When a TV tuner (sold separately) is installed together with optional CCD camera, the following warning message is displayed during use of the CCD camera: “Make sure of safety around your vehicle” ∗ The factory default setting is “ON” 2-1. Touch the [CAMERA WARNING] key to switch between “ON” and “OFF”. ∗ When a CCD camera is connected to the MINI DIN 8P connector, go to ADJUST MODE and set “CONNECT” to “OTHERS”.
2-ZONE: 2 (rear monitor lock) Adjusting the GENERAL 1. Press the [ADJ] button, then touch the [GENERAL] key to display the GENERAL setting menu. 2. Touch the item you wish to set. ∗ To switch to the next menu, touch the [z] key. ∗ When settings are completed, touch the [RTN] key, [ESC] key, or press the [ADJ] button. ● Setting the BEEP ∗ The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound.
English Basic Operations Radio Operations ●Setting the car speaker output for the cellular phone Listening to the radio Owner’s manual ∗ The factory default setting is “RIGHT”. ∗ To output the telephone calls, set the cellular phone interrupt to ON. 2-1. Touch the [z] key. 2-2. Touch the [TEL SP] key to select “LEFT” and “RIGHT”. • LEFT: Telephone calls can be heard on the left speaker connected to this unit. • RIGHT: Telephone calls can be heard on the right speaker connected to this unit.
1. Press the [BAND] button and select the desired band. (FM or AM (MW/LW)) 2. Tune into a station. ● Quick tuning: Press and hold the [a] or [d] button for 1 second or longer to tune in a station. ● Step tuning: Press the [a] or [d] button to manually tune in a station. Recalling a preset station A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically.
English RDS Operations RDS (Radio Data System) Owner’s manual This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received (PS) and can automatically switch to the broadcast station with the best reception as you move long distances (AF switching).
Auto store function for TP stations You can automatically store up to 6 TP stations into preset memory. If the number of TP that can be received is less than 6, broadcast stations already stored in memory are left without being overwritten. 1. With “TA” lit in the display, touch the [LIST] key in the MAIN screen to select the [AUTO STORE] key. Touch the [AUTO STORE] key for 2 seconds or more. 2. The TP stations with the good reception condition are stored into preset memory.
English RDS Operations Owner’s manual ●Cancelling PTY standby mode Touch the [SUB] key in the MAIN screen the [PTY] key appears in the display. Touch the [PTY] key and “ON” switches to “OFF”. The indicator “PTY” goes off and PTY standby mode is cancelled. ●Cancelling PTY interrupt broadcast Touch the [PTY] key (“ON” switches to “OFF”), during the PTY interrupt broadcast to display the subsidiary, the PTY interrupt is cancelled and the unit returns to PTY standby mode.
Switching the PTY display language 2. Touch the [z] key twice to select “PTY LANGUAGE”. Touch the desired language key to change the setting. 3. Touch the [RTN], [ESC] key, or press the [ADJ] button. Changing DVD System Settings Notes: • If the SETUP operation is performed in the middle of DVD video play, the disc plays from the beginning. • Various settings of the SETUP menu cannot be made with the remote control unit. Selecting the DVD SETUP menu 1. Touch the screen to show the menu screen. 2.
English DVD Video Player Operations (VRX848RVD only) Owner’s manual ●When watching through a conventional type of the rear view monitor (4:3) • N PS : The leftmost and rightmost areas of the screen are cut off. 2. Touch the key to select a desired language to set it. ∗ The factory default setting is “ENGLISH”. 3. Touch the [RTN] key ([ESC] key). Setting up the audio language This function allows displaying the important part of image fully on the screen.
Country Set up the country number for setting up of the parental level. 1. Following the steps 1 to 4 in “Selecting the DVD SETUP menu”, touch the [PARENTAL LOCALE] key. 2. Touch the ten-key(0 to 9) to input a 4-digit country code. SWITZERLAND SYRIAN ARAB REPUBLIC TURKEY UNITED ARAB EMIRATES UNITED KINGDOM Vatican City State YEMEN YUGOSLAVIA FAROE ISLANDS GIBRALTAR GREENLAND SVALBARD AND JAN MAYEN ISLANDS ∗ The factory default setting is “7166”(U.K).
English DVD Video Player Operations (VRX848RVD only) Owner’s manual Notes: • Never insert foreign objects into the disc insertion slot. • If the disc is not inserted easily, there may be another disc in the mechanism or the unit may require service. • 8 cm (single play) discs cannot be used. CAUTION With the screen open, a driver may not see the disc insertion slot. For your safety, insert a disc with the screen closed. Watching/Listening to a disc already inserted 1.
Skipping a chapter (searching) About chapter Chapter means a small segment to divide the data area of the disc. 1. Press the [a] / [d] button or touch the [å] / [∂] key during playback. Chapters are skipped, as many as the times the button is pressed, and playback starts. KEY PAD or Chapter down KEY PAD Stopping playback 1. Touch and hold the [s] key for 1 second or longer during playback. Playback stops. 2. To resume playback.
English DVD Video Player Operations (VRX848RVD only) Searching with a chapter/title number Owner’s manual You can locate the beginning of the scene using the chapter numbers or title numbers recorded on the DVD-Video disc. 1. Touch the screen to display the menu screen. 2. Touch the [SRCH] key. Each time you touch the [SFT] key, you can switch between title number input “[T**]” and chapter number input “[C***]”. • Title A large segment to divide the data area of the disc.
Switching subtitles Off Subtitle 1 Subtitle 2 Subtitle X Switching angles On DVD discs in which video images have been recorded in two or more angles, you can switch among the angles during playback. This operation can be performed when the “Setting up the angle mark display” function (see P. 36) is set to “ON”. 1. Touch the screen. 2. Touch the [ ] (Angle mark) key during playback. Each time you touch the key, you can switch among angles. • Depending on the disc, up to 9 angles may be recorded.
English DVD Video Player Operations (VRX848RVD only) Owner’s manual Pausing playback Fast forward and fast backward 1. Press the [s] button. Playback stops. To resume playback, press the [s] button, and playback resumes from the scene where playback is stopped. 1. Press and hold the [a] or [d] button during playback. Press and hold the button, and the playback speed becomes 5-time faster first and then 20-time faster 3 seconds later. Release the button, and the normal speed is restored.
Skipping a track (searching) 1. Press the [a] or [d] button during playback. Tracks are skipped, as many as the times the button is pressed, and playback starts. • Press the [d] button, and playback starts from the beginning of the next track. • Press the [a] button, and playback starts from the beginning of the current track. When this button is pressed again within about 2 seconds, playback starts from the beginning of the previous track.
English DVD Video Player Operations (VRX848RVD only) Selecting a track on the LIST screen Owner’s manual This function allows you to select tracks from a displayed list. 1. Touch the [LIST] key. The list menu will appear. 2. Press the [w] or [z] button to change the track display. 3. Touch the desired track title key. The corresponding track will begin playback. • The titles will scroll when the selected track’s “ ” mark is touched. 4. Press the [RTN] key to return to the previous screen.
Regarding MP3 folder creation Up to 8 folder levels (including the root directory) can be created for MP3 files (items 1 – in the illustration). However, on this unit, folders created above the third level will be converted to 2 levels. 1 2 3 1 4 2 3 4 • Folders containing no MP3 files are not recognized. • Only folders containing tracks (1 to 4 in illustration) are given numbers and displayed on the list. Pausing playback 1. Press the [s] button or touch the [s] key during playback. Playback pauses.
English DVD Video Player Operations (VRX848RVD only) Owner’s manual Press the button, and the playback speed becomes 5-time faster first and then 20-time faster 3 seconds later. Release the button, and the normal speed is restored. • The same operation can be performed by touching the screen to display the menu screen, then touching the [å] or [∂] key. Selecting a folder/track on the LIST screen 1. Touch the [LIST] key during playback. Folders (tracks) are displayed. 2.
This function is available when a VTR, etc. is connected to the MINI DIN 8P connector. Note: • When an optional DVD (CD) changer is connected through the CeNET cable, this unit controls all DVD (CD) changer functions. This unit can control a total of 2 changers (CD and/or DVD). WARNING For your safety, the driver should not watch the VTR, etc. or operate the controls while driving. Please note that watching and operating the VTR, etc. while driving are prohibited by law in some countries.
English CD Changer Operations Owner’s manual When the panel is open: 1. Touch the [DISC], [TRACK], [ARTIST], or [USER] key to select the desired title. The selected titles except for the user title scroll once. Selecting with a track number Selecting a CD When the panel is closed: Each of the [DIRECT] buttons corresponds to a disc loaded into the magazine. ●Selecting a disc from 1 to 6 Press the corresponding [DIRECT] button (1 to 6) to select the desired disc.
TOP function * DISC [RANDOM]; disc random playback The disc random play selects and plays individual tracks or discs automatically in no particular order. 3. Touch the [RTN] key, return to the previous screen. ∗ Other various play functions This function continues on the disc until it is cancelled or the mode is changed. 1. Touch the [SUB] key. ∗ Use to display current play status, and also as the cancel key. 4. To cancel play, touch the [T.SCN] ([D.SCN], [T.RPT], [D.RPT], [T.RDM] or [D.RDM]) key. 2.
English Owner’s manual DVD Changer Operations TV Operations Only basic operations of DVD changer can be performed from the unit. Use the remote control unit to perform the following functions. • SCAN, REPEAT, RANDOM function • V-CD PBC function ON/OFF • DVD SETUP function, AUDIO, SUBTITLE, ANGLE setting function For details on operations other than those described below, see DVD player Operation. For details on DVD changer precautions, refer to the supplied owner’s manual.
Recalling a preset station 1. Press the [BAND] button and select the desired TV band (TV1 or TV2). A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall. There are 2 ways available to recall the preset station. ●Using the [DIRECT] button 1. Press the [BAND] button and select the desired TV band. (TV1 or TV2) 2. To recall a stored TV station, press the desired [DIRECT] button to select that station.
English TV Operations Owner’s manual Auto store Setting the TV area Auto store selects 6 TV stations automatically and stores each one into a preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. 1. Press the [BAND] button and select the desired TV band. (TV1 or TV2) 2. Touch the screen to display the menu, then touch [LIST] key. 3. Touch and hold the [AS] key for 2 seconds or longer.
Manual tuning The Digital Audio Broadcasting (hereinafter referred to as “DAB”) system transmits several programmes on one frequency simultaneously, by compressing audio signals. ∗ The group of programmes, which is transmitted on a single frequency is called “ensemble”. ∗ Some DAB stations have several ensembles and broadcast diversified programmes. ∗ The number of programmes and the contents which an ensemble provides depend on the broadcast stations and times.
English Digital Radio/DAB Operations Service scan Owner’s manual This function scans through each receivable programme in a DAB station being received for 10 seconds sequentially. This is useful when you want to search for a desired programme. 1. Press the [FUNC] button to receive a DAB station. 2. Press the [LIST] key in the MAIN screen and press the [S.SCN] key. The unit starts scanning each programme for 10 seconds sequentially. 3.
PTY When the INFORMATION programme selected in the “INFO SEL” display of the adjustment mode starts, the unit switches to the selected INFORMATION programme automatically. This function enables you to listen to the selected programmes type, irrespective of the function mode. ∗ For details on “Information select”, refer to the section “Information select”. 1.
English Digital Radio/DAB Operations PTY seek Owner’s manual 1. Touch the [SUB] key in the MAIN screen. Touch the [PTY SELECT] key, and then touch the [PRESET] key or [ITEM] key. The PTY select mode is turned on. 2. Select a desired PTY. 3. Press the [d] or [a] of button. If you press the [d] button, the unit seeks a PTY broadcast moving up the frequencies; if you press the [a] button, it seeks moving down the frequencies.
NAVI functions ∗ If the operation of this unit is interrupted by a NAVI operation, audio is switched to OFF. ∗ If the operation of this unit is interrupted by a NAVI operation when the panel is closed, the subLCD display is turned to “NVG”. Setting Clarion NAVI as external input equipment Be sure to perform this setting after connecting NAX943DV. ∗ The factory default setting is “NONE”. 1. When the panel is open, press the [ADJ] button to show the adjustment selection display. 2. Touch the [GENERAL] key.
English Connecting Other Company’s Image Equipment Owner’s manual RGB type or composite type images from other company’s equipment can be displayed on this unit. Be sure to perform this setting after connecting the RGB type or composite type image equipment to the RGB terminal. 1. When the panel is open, press the [ADJ] button to show the adjustment selection display. 2. Touch the [GENERAL] key. Touch the [CONNECT] key to select the following items: 3.
Title list play ∗ You can not display a title list with the unit in Seek, Preset Scan, Auto store (TV) mode. Cancel those operation modes before to display a title list. 1. Touch the screen (TV mode only). 2. Touch the [LIST] key to display the LIST screen. A title list is displayed. The following functions can be carried out in a title list display. ●TUNER: The title or frequency of stations stored in preset buttons 1 to 6 or frequency is displayed. (When receiving FM, the PS.
English 5.1 ch Surround Decoder Operations Owner’s manual 5.1 ch Surround Decoder control function ●Dolby PL II CONTROL This function is available when a 5.1 ch Surround Decoder (DVH943) is connected. When the 5.1 ch Surround Decoder (DVH943, sold separately) is CeNET connected, the 5.1 ch Surround Decoder Control unit (DVC923, sold separately) cannot be used. This section describes operation procedures only. For other details, refer to the owner’s manual supplied with the 5.
●SPEAKER GAIN This function sets speaker output level. DSF mode ∗ This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF. DSF effect ON/OFF 3-1. Touch the [SPEAKER GAIN] key to show the submenu. 3-2. Touch the [FRONT L], [CENTER], [FRONT R], [SURROUND R], [SURROUND L] or [SUB WOOFER] key to set respective item. 3-3. Touch the key to make adjustments in the range –10 dB to +10 dB in 1 dB step increments. The default value is “0 dB”.
English 5.1 ch Surround Decoder Operations Setting and storing P.EQ Properties Owner’s manual 1. Press the [ADJ] button and touch the [AUDIO] key. 2. Touch the [P.EQ] key to show the P.EQ adjusting display. 3. Touch the key for the desirable type to select it. The P.EQ adjustment contents are as follows: ●SIGNAL ∗ The factory default setting is “P.NOISE”. This function selects “P. NOISE” or “MUSIC”. ●SPEAKER SELECT ∗ The factory default setting is “FRONT”.
Problem Cause English 12. IN CASE OF DIFFICULTY Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Note: When the reset button is pressed, turn off the ACC power.
English Problem TV Owner’s manual 64 Cause Measure The image is not displayed. The parking brake is not pulled. Check that the parking brake is applied. The display is dark. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0˚C or less. Set to an appropriate temperature (25˚C or so) and check it again. The headlight of the vehicle is lit.
English 13. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. DVD PLAYER CD CHANGER Owner’s manual Cause Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc.
English FM Tuner LCD Monitor Owner’s manual 14. SPECIFICATIONS Frequency Range: 87.5 MHz to 108.
English Installation and Wire connection manual ■ Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. BEFORE STARTING ............................................................... PACKAGE CONTENTS ........................................................... GENERAL CAUTIONS ............................................................ CAUTIONS ON INSTALLATION .............................................. INSTALLING THE MAIN UNIT ................................................. REMOVING THE MAIN UNIT ..................
English 3. GENERAL CAUTIONS Installation and Wire connection manual 1. Do not open the case. There are no user serviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized CLARION service centre. 2. Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol, etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently. 4. CAUTIONS ON INSTALLATION 1.
English 5. INSTALLING THE MAIN UNIT ■ Universal Mount Notes: 1) Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details. 2) Fasten the front stopper securely to prevent the main unit from coming loose.
English ■ Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles) Installation and Wire connection manual This unit is designed for fixed installation in the dashboard. If the vehicle is equipped with a factory-installed radio, install the main unit with the parts and screws marked (∗). (Figure 8) If the vehicle is not equipped with a factoryinstalled radio, obtain an installation kit to install the main unit in the following procedure. 1. Remove the screws from both side of the main unit.
pull the main unit out by the hook plate. (Insert both the right and left edges of the hook plate.) (Figure 9) Note: Keep the hook plate. You cannot remove the main unit without disengaging the hook plate. Instrument panel Universal mounting bracket 2-Hook plate Main Unit Spring Outer escutcheon A B Figure 9 7. CAUTIONS ON WIRING 1. Be sure to turn the power off before wiring. 2. Be particularly careful where you route the wires. Keep them well away from the engine, and exhaust pipe, etc.
English 8.
English Installation and Wire connection manual B-2 B-3 B-5 B-4 B-1 B-6 1 B-7 B-8 A-7 A-8 ∗3 2 A-6 ∗1 A-5 A-4 3 4 ∗2 5 ∗1 No.
English ■ Connecting the Accessories • Connection to the external amplifier The external amplifier can be connected unless the 5.1ch Surround Decoder is connected. For detailed information, refer to the instruction manual of the 5.1ch Surround Decoder. Installation and Wire connection manual • Connection to the CCD camera for vehicle The CCD camera for vehicle can be connected to CCD terminal. For detailed information, refer to the instruction sheet or manual for the CCD camera.
English 9.
English ■ Sample System 2 VRX848RVD/VRX743R AV adapter cable (CCA-389, sold separately) Installation and Wire connection manual MINI DIN 8P connector VTR (Glay) Front Speakers RCA video cable (included the TV tuner) RCA cable (sold separately) TV Tuner Rear Speakers 4-Channel Amplifier (APA4320) RCA cable (included the DVH943) CeNET cable (included the DVH943) RCA cable (sold separately) Center speaker built-in amplifier (SRK602) (Black) 5.
