MAX668RVD.book Page 9 Thursday, May 18, 2006 9:47 AM TUNER mode operation English (Source menu) Owner’s manual ∗3 (Option Menu) (Preset List screen) (PTY Preset List screen) ∗Selects desired station. (PTY Item List screen) Note: ∗1:These images indicate the buttons to press or keys to touch. ∗2:External equipment not connected with CeNET is not displayed. ∗3:When the TUNER mode is currently selected, touch the [Back] key.
MAX668RVD.book Page 10 Thursday, May 18, 2006 9:47 AM DVD Video mode operation English (DVD PLAYER mode screen)∗4 (Source menu) Owner’s manual ∗Screen during DVD mode when motorcar moving. (Option menu) (DVD SETUP menu) Note: ∗4:When displaying movies in DVD video mode, touching the screen surface will cause the DVD PLAYER mode screen to be displayed.
MAX668RVD.book Page 11 Thursday, May 18, 2006 9:47 AM Adjusting audio feature settings English ●When no surround decoder is connected (From any screen) Owner’s manual (ADJUST mode menu) (AUDIO menu) (AUDIO EXT.
MAX668RVD.book Page 12 Thursday, May 18, 2006 9:47 AM English ●When the 5.1 ch Surround Decoder is connected (From any screen) Owner’s manual (ADJUST mode menu) (AUDIO EXT.
MAX668RVD.book Page 13 Thursday, May 18, 2006 9:47 AM Adjusting the other system settings English (From any screen) Owner’s manual (ADJUST mode menu) (GENERAL menu) (MONITOR menu) (MONITOR ADJ) (WALL COLOR) (Monitor Adjust screen) (WALL COLOR screen) Bright Color Hue Dimmer ∗Switched by touching this key repeatedly. ( “Hue” is not displayed when displaying PAL images.
MAX668RVD.book Page 14 Thursday, May 18, 2006 9:47 AM English 6. REMOTE CONTROL Remote control unit Owner’s manual Signal transmitter Operating range: 30˚ in all directions [BAND] [MUTE] [SRC] [VOLUME] [P.TIME] [0-9] [DISC SEL] [ ],[ ] [SEARCH MODE] [MENU] [RTN] [TOP MENU] [SET UP] [ENT] [ ],[ ] [TA] [2-ZONE] [RPT] [SCN] [PBC] [RDM] [AUDIO] [SLOW] [ANGLE] [SUB TITLE] Inserting the Batteries 1. Slide the rear cover in the direction of the arrow, and remove it. 2.
MAX668RVD.book Page 15 Thursday, May 18, 2006 9:47 AM You can use the remote control unit to control the MAX668RVD. When the 2-ZONE function is ON, the controls work upon the selected zone. Note: • The steering wheel remote control operations work upon the MAIN zone even when the SUB zone is selected. [SRC] button • Press this button to switch the modes such as TUNER mode, DVD PLAYER mode. [VOLUME] buttons • Increase and decrease volume. [MUTE] button • Turns mute on and off.
MAX668RVD.book Page 16 Thursday, May 18, 2006 9:47 AM Functions of Remote Control Unit Buttons English [MENU] button • Press to display menu stored on video disc. Owner’s manual [SET UP] button • Press to show the DVD SETUP menu screen during DVD video playback. [TOP MENU] button • Press to display the Top Menu screen stored on DVD video disc. Some discs do not display the top menu screen. [E], [e], [T], [t] buttons • Press to select button items on the menu screen of a DVD video.
MAX668RVD.book Page 17 Thursday, May 18, 2006 9:47 AM Functions of Remote Control Unit Buttons DVD changer mode [BAND] button • Press to switch discs. [P.TIME] button • Keep pressing more than 1 second to switch between the time progress and remaining time to be displayed. [DISC SEL] button • Press to show/hide the Disc List screen. [0 - 9] buttons • Press to enter track numbers in the Key Pad screen. • Press to select the disc number in the Disc List screen.
MAX668RVD.book Page 18 Thursday, May 18, 2006 9:47 AM English 7. CAUTIONS ON HANDLING Operation panel/Generalities Owner’s manual For a longer service life, be sure to read the following cautions. • The operation panel will operate properly in a temperature range of 0 to 60°C. • Do not allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the set in any way. Doing so may result in damage.
MAX668RVD.book Page 19 Thursday, May 18, 2006 9:47 AM Storage • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters.
MAX668RVD.book Page 20 Thursday, May 18, 2006 9:47 AM English 8. DVD VIDEO SYSTEM DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc contains either one film or four hours of music. Owner’s manual DVD Video Features This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Note: • The functions described in the section, “Features”, for example, the recorded language, subtitles, angles, etc.
MAX668RVD.book Page 21 Thursday, May 18, 2006 9:47 AM Discs that cannot be played back This DVD video player can play the following discs. This DVD video player cannot play back DVDAudio, DVD-RAM, Photo CDs, etc. Playable discs DVD video discs video CDs CD TEXT Audio CDs MP3 ID3 TAG WMA About CD Extra discs Note: • It may also not be possible to play back CDs recorded on a CD-R unit and CD-RW unit. (Cause: disc characteristics, cracks, dust/dirt, dust/dirt on player’s lens, etc.
MAX668RVD.book Page 22 Thursday, May 18, 2006 9:47 AM English 9. OPERATIONS Basic Operations Owner’s manual Note: • Be sure to read this chapter referring to the chapter “2. CONTROLS” on page 5. CAUTION CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Turning on and off the power Note: • Start the engine before using this unit.
MAX668RVD.book Page 23 Thursday, May 18, 2006 9:47 AM Basic Operations 1. Press the [7] (OPEN/CLOSE) button. The operation panel will be opened or closed. Adjusting the AUDIO 1. Press the [ADJ] button, then touch the [AUDIO] key. Note: • The operation panel will close automatically when leaving it open for a while. • When the operation panel is open, the touch panel cannot be operated.
MAX668RVD.book Page 24 Thursday, May 18, 2006 9:47 AM Basic Operations English Adjusting the BASS Owner’s manual The bass gain, bass frequency (centre frequency) and bass Q can be adjusted as follows. 2-1. Touch the []] key of the BASS item. 3-1. When the AUDIO BASS screen is displayed, touch the [[] or []] key for the desirable type to adjust to a desirable level. GAIN : –6 to 8 (The factory default setting is “0”.) FREQ. : 50Hz, 80Hz, 120Hz (The factory default setting is “50Hz”.) Q: 1, 1.25, 1.
MAX668RVD.book Page 25 Thursday, May 18, 2006 9:47 AM Basic Operations * This screen can also be displayed directly by pressing and holding the [ADJ] button for more than 1 second. 2-2. Touch the [AUTO], [DAY] or [NIGHT] key to set the colour mode (The factory default setting is “AUTO”). “AUTO” : The colour is changed according to the status of the car light: When the car light is off: light grey colour When the car light is on: dark grey colour “DAY” : Set to the light grey colour.
MAX668RVD.book Page 26 Thursday, May 18, 2006 9:47 AM Basic Operations English Warning display when CCD camera is installed Owner’s manual 2-1. Touch the [ON] or [OFF] key of the CAMERA WARNING item to turn this function on or off (The factory default setting is “ON”). The following warning message is displayed during use of the CCD camera: “Make sure of safety around your vehicle”. Switching the VTR system between NTSC and PAL Note: • This setting is applied only to the VISUAL/VTR input mode.
MAX668RVD.book Page 27 Thursday, May 18, 2006 9:47 AM Basic Operations When you connect your mobile phone to this unit using a separately sold cable, you can listen to your telephone calls on your car speakers. • The factory default setting is “OFF”. Note: • This function is not available when the Clarion navigation system (NAX963HD) is connected. • When the navigation system is connected, use the monitor lock function. Locking the monitor locks the screen size in F.
MAX668RVD.book Page 28 Thursday, May 18, 2006 9:47 AM Basic Operations English Performing the system check 3-1. Touch the [C] key to display the next menu screen. Owner’s manual 3-2. Touch the []] key of the SYSTEM CHECK item. The available operation mode is listed in white letters. 4. Enter the same Personal Code again for confirmation, then touch and hold the [ENT] key for more than 2 seconds. The entered Personal Code will be set, and it will return to the previous screen.
MAX668RVD.book Page 29 Thursday, May 18, 2006 9:47 AM Basic Operations About the 2-ZONE function Note: • The TUNER mode cannot be specified for the SUB zone. • The 2-ZONE function is disabled when the following equipments are connected: • 5.1 channel surround decoder (DVH943N) • DAB tuner (DAH923) • The steering wheel remote control operations work upon the MAIN zone even when the SUB zone is selected.
MAX668RVD.book Page 30 Thursday, May 18, 2006 9:47 AM Basic Operations English Monitor image and sound with 2-ZONE ON/OFF ●With 2-ZONE function OFF Front monitor lock ON Front monitor lock OFF Owner’s manual Visual connection [OTHERS] (*1) Visual connection [RGB]/ [COMPOSITE] (*1) Visual connection [OTHERS] (*1) Visual connection [RGB]/ [COMPOSITE] (*1) Front monitor (main unit) Displays image of device connected to the Visual terminal.
MAX668RVD.book Page 31 Thursday, May 18, 2006 9:47 AM Listening to the radio ●LOCAL SEEK If you keep touching the [X] or [x] key more than 1 second, the Local Seek tuning is carried out. The broadcast stations with good reception sensitivity are automatically selected. • When the Local Seek tuning starts, “LO SEEK” appears on the screen. Manual tuning 2. Press the [BAND] button or touch the [Band] key to select the radio band.
MAX668RVD.book Page 32 Thursday, May 18, 2006 9:47 AM Radio Operations English Owner’s manual Recalling a preset station Manual memory There are total of 24 preset positions (6-FM1, 6FM2, 6-FM3, 6-AM (MW/LW)) to store individual radio stations in memory. There are 2 ways available to recall the preset station. ●Using the [R] or [F] button 1. Press the [BAND] button to select the desired band (FM or AM (MW/LW)). 2. Press the [R] or [F] button to recall the previous or next stored station.
MAX668RVD.book Page 33 Thursday, May 18, 2006 9:47 AM AF function This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received (PS), and can automatically switch to the broadcast station with the best reception as you move long distances (AF switching).
MAX668RVD.book Page 34 Thursday, May 18, 2006 9:47 AM RDS Operations English Manually tuning a regional station in the same network Owner’s manual Note: • This function can be used when a regional broadcast of the same network is received. • This function is enabled only when the AF function is ON, and the REG function is OFF. 1. Touch the [List] key on the RDS mode screen. 2. Touch your desired Preset key to call out a regional station. 3.
MAX668RVD.book Page 35 Thursday, May 18, 2006 9:47 AM RDS Operations News News 2 Info Information PTY item Preset number PTY item ENGLISH Contents 3 Pop M Pop music 4 Sport Sport ENGLISH Contents 5 Classics Classics News News 6 Easy M Easy listening music Affairs Current Affairs Info Information * The PTY select mode is cancelled automatically if you do not touch the screen for 7 seconds. ●Cancelling PTY standby mode 1. Touch the [Option] key on the RDS mode screen. 2.
MAX668RVD.book Page 36 Thursday, May 18, 2006 9:47 AM RDS Operations English Emergency broadcast Owner’s manual If an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears on the screen and the emergency broadcast can be heard. ●Cancelling an emergency broadcast 1. Touch the [Option] key on the RDS mode screen to display the RDS menu. 2. Touch the [OFF] key of the AF item. The emergency broadcast reception is cancelled.
MAX668RVD.book Page 37 Thursday, May 18, 2006 9:47 AM Changing DVD System Settings Selecting the DVD SETUP menu 1. Press the [SRC] button, and touch the [DVD PLAYER] key. The DVD PLAYER mode screen is displayed. 2. Touch the [Option] key to display the Option menu. 3. Touch the [Setup] key to display the DVD SETUP menu. Set up the screen size according to the rear view monitor which is connected to this unit. 4-1.
MAX668RVD.book Page 38 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations English Setting up the disc menu language Owner’s manual 4-1. Touch the []] key of MENU LANGUAGE item. The MENU LANGUAGE menu is displayed. 4-2. Touch the key to select a desired language to set it. • The factory default setting is “ENGLISH”. Setting up the audio language 4-1. Touch the []] key of AUDIO LANGUAGE item. The AUDIO LANGUAGE menu is displayed. 4-2. Touch the key to select a desired language to set it.
MAX668RVD.book Page 39 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations Input code 7666 7683 LIECHTENSTEIN 7673 LUXEMBOURG 7685 MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF 7775 MALTA 7784 MONACO 7767 NETHERLANDS 7876 (NETHERLANDS ANTILLES) 6578 NORWAY 7879 OMAN 7977 POLAND 8076 PORTUGAL 8084 QATAR 8165 ROMANIA 8279 SAN MARINO 8377 SAUDI ARABIA You can change the level of parental lock (audiovisual restriction).
MAX668RVD.book Page 40 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations English Owner’s manual Basic Operations Pausing play Loading a disc 1. Press the [p] button or touch the [p] key to pause play. “PAUSE” appears in the display. 2. To resume disc play, press the [p] button again. 1. Press the [7] (OPEN/CLOSE) button to open the operation panel. 2. Insert a disc into the centre of the insertion slot with the label side facing up. The disc plays automatically after loading.
MAX668RVD.book Page 41 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations When the Key Pad becomes difficult to view in the menu display, you can move it to the other side of the screen. * The displayed contents differ depending on the DVD software. Key PAD • Example showing DVD menu display Operating the DVD menu You can select the button items displayed in the DVD menu by directly touching it.
MAX668RVD.book Page 42 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations English Slow playback Owner’s manual 1. Press the [p] button or touch the [p] key, then press and hold the [F] button. While pressing the button, slow playback continues at the speed 1/3 times the normal playback. Releasing the button resumes the normal playback. • Slow playback cannot be performed in the backward direction. In addition, audio cannot be reproduced during slow playback.
MAX668RVD.book Page 43 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations On discs in which two or more audios or audio languages have been recorded, you can switch among the audio languages during playback. 1. Showing the DVD PLAYER mode screen, touch the [Option] key. 2. Touch the [Audio] key during playback. • Each time you touch the key, you can switch among audio languages. • Depending on the disc, up to 8 audios may be recorded.
MAX668RVD.book Page 44 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations English Switching angles Owner’s manual On DVD discs in which video images have been recorded in two or more angles, you can switch among the angles during playback. This operation can be performed when the “Setting up the angle mark display” function (see page 37) is set to “ON”. 1. Touch the [ ] (Angle) key during playback. Each time you touch the key, you can switch among angles.
MAX668RVD.book Page 45 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations This operation allows searching with the track numbers recorded on the video CDs. 1. Touch the screen to display the VIDEO CD mode screen. 2. Touch the [Search] key. 3. Input the track number that you want to play back with [0] to [9] key. 4. Touch the [ENT] key. Playback starts from the scene of the input track number.
MAX668RVD.book Page 46 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations English Owner’s manual On/Off of Playback Control Skipping a track (searching) On Video CDs equipped with Play Back Control function, you can turn it on/off. • The factory default setting is “ON”. 1. Touch the screen to display the VIDEO CD mode screen. 2. Each time you touch the [PBC] key, you can switch between on and off. When the PBC is turned on or off, the disc plays from the beginning.
MAX668RVD.book Page 47 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations 1. Touch the [Option] key. Listening to an MP3/WMA What is MP3/WMA? 2. Touch the touch key of the function you want to play. [Track Scan] : track scan playback This operation scans and plays back all tracks recorded on the disc, the first 10 seconds for each. * “T.SCN” is displayed on the screen. [Track Repeat] : track repeat playback This operation plays back tracks recorded on the CD repeatedly. * “T.
MAX668RVD.book Page 48 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations English Owner’s manual ●Logical format (File system) 1. When writing an MP3/WMA file on a disc, please select “ISO9660 level 1 or level 2 (without including expansion format)” as the writing software format. Normal playback may not be possible if the disc is recorded on another format. 2.
MAX668RVD.book Page 49 Thursday, May 18, 2006 9:47 AM DVD Video Player Operations 1. Touch the [Option] key. Owner’s manual Other various play functions 1. Press the [BAND] button during playback. The tracks of the current folder are skipped and playback starts from the first track of the next folder. English Skipping the current folder Selecting a folder/track on the LIST screen 1. Touch the [List] key during playback. Folder List screen is displayed. 2.
MAX668RVD.book Page 50 Thursday, May 18, 2006 9:47 AM English Other Functions Owner’s manual Entering titles Title list play Titles up to 10 characters long can be stored in memory and displayed for CD, TV stations, and CDs in the CD changer. The numbers of titles that can be entered for each mode are as follows. You can display a list of titles, then select the CD track, disc or broadcast station to listen to from that list.
MAX668RVD.book Page 51 Thursday, May 18, 2006 9:47 AM Other Functions This function is used to disable the internal amplifier when an external amplifier is connected. • The factory default setting is “OFF”. 1. Press the [ADJ] button. 2. Touch the [AUDIO EXT.] key. 3. Touch the [ON] or [OFF] of the AMP CANCEL item to turn the internal amplifier on or off. 4. Touch the [Back] key to return to the previous screen. 1. Touch the screen to display the mode menu, then touch “Display size” key ([F.WIDE], etc.
MAX668RVD.book Page 52 Thursday, May 18, 2006 9:47 AM English 10.OPERATIONS OF ACCESSORIES iPod Operations Owner’s manual This unit can be used to control a connected Apple iPod (third generation version 2.2 or higher, iPod Mini, fourth generation, iPod nano, iPod with video). Note: • Note that iPod versions higher than those noted above may not be playable. • The unit will not operate, or may operate improperly with unsupported versions.
MAX668RVD.book Page 53 Thursday, May 18, 2006 9:47 AM iPod Operations Play/Pause icon(p) display Track No. Clock time Play mode (*1) Song title/ Artist name/ Album title (*2) Progress/ Volume indicator Play time Remaining time Note: *1 Displays status of Repeat, Shuffle play. 1 : 1-track Repeat A : All Repeat S : Song Shuffle A : Album Shuffle *2 When a Podcast or Audio Book which has two or more chapters is played back, the chapter title and chapter number are displayed.
MAX668RVD.book Page 54 Thursday, May 18, 2006 9:47 AM iPod Operations English Owner’s manual Fast forward and fast backward 1. Press and hold the [R] or [F] button during playback. The playback speed becomes 5-time faster first and then 20-time faster 3 seconds later. Releasing the button resumes the normal speed playback. TOP function The TOP function resets the player to play the first track of the tracks. 1. Press the [BAND] button to play back the first track of the current list.
MAX668RVD.book Page 55 Thursday, May 18, 2006 9:47 AM English VISUAL Operations This function is available when a VTR, etc. is connected to the visual terminal. WARNING Switching to the VISUAL mode Note: • For your safety, the MAX668RVD has a safety function which turns off the picture when the car is moving, so only the audio can be heard. The picture can only be watched when the car is stopped and the parking brake is applied. The visual terminal can be used to change the input audio level.
MAX668RVD.book Page 56 Thursday, May 18, 2006 9:47 AM CD Changer Operations English Switching to a next disc (Disc Up function) Other various play functions 1. Touch the [Option] key. Owner’s manual The disc up function plays from the first track (track No.1) of the next disc. 1. Press the [BAND] button. The disc changes to the next disc. Searching with a track number * This function is available only for the current disc. 1. Touch the [Search] key. 2.
MAX668RVD.book Page 57 Thursday, May 18, 2006 9:47 AM Note: • When the DVD changer (VCZ628) is connected via optical cable, no sound will be output if AUDIO OUT is switched to ANALOG on the changer’s “GENERAL SETUP” menu. • Set the “TV TYPE” of the DVD changer’s “GENERAL SETUP” menu to the same setting as that set in the “Switching the VTR system between NTSC and PAL” of this unit. Selecting a disc from the list 1. Touch the [List] key. 2.
MAX668RVD.book Page 58 Thursday, May 18, 2006 9:47 AM TV Operations English 1. Press the [BAND] button or touch the [Band] key to select the desired band. (TV1 or TV2) Owner’s manual * If “MANU” is not displayed in the display, keep pressing the [BAND] button more than 1 second. “MANU” appears and manual tuning is now available. 2. Tune into a station. Quick tuning: Touch and hold the [X] or [x] key for more than 1 second to tune in a station.
MAX668RVD.book Page 59 Thursday, May 18, 2006 9:47 AM Seek tuning The DAB (Digital Audio Broadcasting) system transmits several programmes on one frequency simultaneously, by compressing audio signals. • A DAB station has multiple programmes on one frequency. • The group of programmes, which is transmitted on a single frequency is called “ensemble”. • Some DAB stations have several ensembles and broadcast diversified programmes.
MAX668RVD.book Page 60 Thursday, May 18, 2006 9:47 AM Digital Radio/DAB Operations English Storing a programme to preset memory Owner’s manual 1. Touch the [Band] key to select the desired band (M1, M2 or M3). 2. Receive the programme you wish to store by performing the seek tuning, etc. 3. Touch the [List] key. 4. Touch and hold the desired preset key for more than 2 seconds to store the current programme.
MAX668RVD.book Page 61 Thursday, May 18, 2006 9:47 AM NAVI operation Note: • Hereafter in this section, the Navigation system will be called as “NAVI”. • When the Clarion NAVI NAX963HD is connected, the following functions are available: Changes between the NAVI display and the Audio/Visual (hereinafter, refered as “AV”) display. • Showing the NAVI display • Operation by using the panel side buttons • NAVI guidance voice interruption • When the NAVI (NAX963HD) is being used… • If the 5.
MAX668RVD.book Page 62 Thursday, May 18, 2006 9:47 AM NAVI Operations (NAX963HD, etc.) English [MENU] button • When in the NAVI mode, the MENU screen of the NAVI mode is displayed. Owner’s manual Connecting Other Company’s Image Equipment The RGB type or composite type images from the other company’s equipment can be displayed on this unit. Be sure to perform this setting after connecting the RGB type or composite type image equipment to the RGB terminal. 1.
L010.fm Page 63 Thursday, May 18, 2006 10:11 AM ●SPEAKER SEL (speaker selection) This function determines centre speaker, surround speaker and sub woofer connection. 3-1. Touch the []] key of the SPEAKER SEL item to show the submenu. This section describes operation procedures of setting functions. For details on each function, refer to the owner’s manual supplied with the 5.1 ch Surround Decoder. 3-2.
MAX668RVD.book Page 64 Thursday, May 18, 2006 9:47 AM 5.1 ch Surround Decoder Operations English ●FILTER This function is used to select filter frequencies that suit the speakers that are used. Owner’s manual * This function is not available for speakers whose SPEAKER SEL setting is set to “OFF”. 3-1. Touch the []] key of the FILTER item to show the submenu. 3-2. Touch the [[] or []] key of the FRONT HPF, CENTER HPF, SURROUND HPF or SUB WOOFER LPF item to adjust.
MAX668RVD.book Page 65 Thursday, May 18, 2006 9:47 AM 5.1 ch Surround Decoder Operations DSF effect ON/OFF 1. Press the [ADJ] button, and touch the [AUDIO] key. 2. Touch the []] key of the P.EQ item to display the submenu. 3. Touch the key for the desirable type to select. The P.EQ adjustment contents are as follows: [SIGNAL]: This function selects “MUSIC” or “P. NOISE”. • The factory default setting is “P.NOISE”. [SPEAKER SELECT]: This function selects “FRONT”, “CENTER” or “SURROUND”.
MAX668RVD.book Page 66 Thursday, May 18, 2006 9:47 AM 5.1 ch Surround Decoder Operations English Selecting the Dolby PLII (Dolby Pro Logic II ) type • The factory default setting is “OFF”. Owner’s manual * This setting is disabled when both the CENTER SP and SURROUND SP items of the SPEAKER SEL setting are set to “OFF”. 1. Press the [ADJ] button, and touch the [AUDIO] key. 2. Touch the []] key of the Dolby PLII item. 3. Touch the key for the desirable type to select. 4.
MAX668RVD.book Page 67 Thursday, May 18, 2006 9:47 AM English 11.IN CASE OF DIFFICULTY GENERAL Cause Measure Fuse is blown. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power and open the operation panel. Press the [RESET] button with a thin rod. Display is not accurate. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase.
MAX668RVD.book Page 68 Thursday, May 18, 2006 9:47 AM TV/VTR (When connecting an optional TV tuner, etc.) English Problem Cause Measure The parking brake is not engaged. Check that the parking brake is engaged. The display is dark. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0°C or lower. Set to an appropriate temperature (25°C or so) and check it again.
MAX668RVD.book Page 69 Thursday, May 18, 2006 9:47 AM English 12.ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem. Owner’s manual DVD Player Display Cause Measure ERROR 2 A disc is caught inside the This is a failure of DVD deck’s mechanism and CD deck and is not ejected. consult your store of purchase. ERROR 3 A disc cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc.
MAX668RVD.book Page 70 Thursday, May 18, 2006 9:47 AM LCD Monitor Frequency Range: 87.50 MHz to 108.00 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 32 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Screen Size: 7-inch wide type 156.2 mm Width × 82.
MAX668RVD.book Page 71 Thursday, May 18, 2006 9:47 AM English INSTALLATION AND WIRE CONNECTION MANUAL INSTALLATION AND WIRE CONNECTION MANUAL 1. BEFORE STARTING 1. This set is exclusively for use in cars with a negative earth 12 V power supply. 2. Read these instructions carefully. 3. Be sure to disconnect the battery “-” terminal before starting. This is to prevent short circuits during installation. (Figure 1) Car battery Figure 1 2.
MAX668RVD.book Page 72 Thursday, May 18, 2006 9:47 AM English 4. CAUTIONS ON INSTALLATION INSTALLATION AND WIRE CONNECTION MANUAL 1. Prepare all articles necessary for installing the main unit before starting. 2. This model features an operation panel that slides forward. On some types of cars, the operation panel may make contact with the dashboard or shift lever, in which cause it cannot be installed.
MAX668RVD.book Page 73 Thursday, May 18, 2006 9:47 AM 2. Wire as shown in Section 7. 3. Reassemble and secure the unit in the dashboard and set the face panel and centre panel.
MAX668RVD.book Page 74 Thursday, May 18, 2006 9:47 AM Installing the Main Unit in a TOYOTA Vehicle English Install by using parts attached to the vehicle. (Screws marked ★ are attached to the vehicle.) INSTALLATION AND WIRE CONNECTION MANUAL Main Unit 8–Hexagonal screw (M5 × 8) Centre Panel (* 2) Mounting bracket (1 pair for the left and right sides) *3 Figure 7 Note: *2: Some panel openings are too small for the unit depending on the vehicle type and model.
MAX668RVD.book Page 75 Thursday, May 18, 2006 9:47 AM 5. Connect the CeNET extension cable fully and securely until it locks. When the CeNET extension cable is pulled, hold the slide cap part and pull it towards you. (Figure 9) * When the CeNET extension cable is extended or branches, use extension cable CCA-520 (2.5 m) or CCA-521 (0.6 m), or Y-adapter CCA-519 (each of them is sold separately).
MAX668RVD.book Page 76 Thursday, May 18, 2006 9:47 AM English 7. WIRE CONNECTION Note: • Before installing, be sure to disconnect the negative cable of the car battery. • In the optional devices, the RCA Pin and the Connector cable are separately-sold items.
MAX668RVD.book Page 77 Thursday, May 18, 2006 9:47 AM Power supply lead English B-3 B-5 B-4 B-1 INSTALLATION AND WIRE CONNECTION MANUAL B-2 B-6 1 B-7 B-8 A-7 A-8 ∗3 2 A-6 ∗1 No.
MAX668RVD.book Page 78 Thursday, May 18, 2006 9:47 AM English ●Connecting the parking brake lead Connect the lead to parking brake lamp earth in the metre panel. Note: • Connecting the parking brake lead to lamp earth allows you to watch TV/VTR/DVD video/video CD when the parking brake is engaged. • When the parking brake lead is not connected, the monitor will not turn on. INSTALLATION AND WIRE CONNECTION MANUAL Parking brake lamp + lead to battery ●How to attach the electro-tap 1.
MAX668RVD.book Page 79 Thursday, May 18, 2006 9:47 AM English 8.
MAX668RVD.
