® Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Manual de instrucciones y de instalación NP401 FLASH MEMORY NAVIGATION SYSTEM SYSTÈME DE NAVIGATION À MÉMOIRE FLASH SISTEMA DE NAVEGACIÓN MEMORIA FLASH NP401 OM_100920_EN.
English CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com Owner’s Manual Dear Customer: Congratulations on your purchase of a Clarion mobile electronic product. We are confident that you’ll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website.
1. PRECAUTIONS NP401 NP401 OM_100920_EN.indd 3 Owner’s Manual • For your safety, the driver should not watch any video sources and/or operate the controls while driving. Please note that watching and operating any video sources while driving are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard. • When using the navigation system, follow the precautions listed below.
English Owner’s Manual 1. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. 2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
protect the unit if the temperature is extremely high or low. In such a case, please wait until temperature becomes normal again. Cleaning Owner’s Manual • Cleaning the cabinet Use a soft, dry cloth and gently wipe off the dirt. For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth. Do not use benzene, thinner, car cleaner, etc., as these substances may damage the cabinet or cause the paint to peel.
CONTENTS English 1. PRECAUTIONS..............................................................................................................................3 2. CAUTIONS ON HANDLING...........................................................................................................4 3. Warnings and Safety information...................................................................................................8 4. Getting started with Clarion Mobile Map...........................................
NP401 OM_100920_EN.indd 7 Owner’s Manual NP401 English 5.8 Pausing the active route........................................................................................................39 5.9 Deleting the next via point from the route..............................................................................40 5.10 Deleting the active route......................................................................................................40 5.11 Using Track Logs..................................
English 3. Warnings and Safety information Clarion Mobile Map is a navigation system that helps you find your way to your destination with its GPS receiver. Clarion Mobile Map does not transmit your GPS position; others cannot track you. Owner’s Manual It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate Clarion Mobile Map before you start your journey.
Clarion Mobile Map is optimized for in-car use. You can use it easily by tapping the screen buttons and the map with your fingertips. Tasks Instructions Double tapping the You do not need to tap the screen twice for any action. With buttons and controls, a screen single tap is enough. You do not need this to access the basic navigation functions.
2. Select the language and speaker used for voice guidance messages. Later you can change it in Settings (page 67). English 3. Read and accept the End User License Agreement (page 73). 4. Select whether to start the program in Simple mode or in Advanced mode. Later you can switch between the two operating modes in Settings. 5. Read and accept the road safety warning. Owner’s Manual After this, the Navigation menu appears and you can start using Clarion Mobile Map.
4.1 Simple and Advanced modes English The two operating modes of Clarion Mobile Map mainly differ in the menu structure and the number of available features. The controls and screen layouts are the same. • Simple mode: you have easy access to the most important navigation functions and the basic settings only. The rest of the settings are set to values that are optimal for typical use. • Advanced mode: you have access to the full functionality of Clarion Mobile Map. , .
English Owner’s Manual Type of action Available in Simple mode Available in Advanced mode Map Screen settings Only color profiles (from Quick Menu) Yes See page 64 Menu settings Only background picture Yes See page 70 Sound settings Yes (from Quick Menu) Yes See page 65 Route Planning options Yes Yes See page 66 Regional settings Only language selection Yes See page 67 Warnings No Yes See page 69 Explanation 4.
Type Example Description How to use it Virtual keyboard Alphabetic and alphanumeric keyboards to enter text and numbers. Owner’s Manual Each key is a touch screen button. English Switch When there are only two choices, a checkmark shows Tap it to turn the switch on or off. whether the feature is enabled. 4.2.1 Using keyboards You only need to enter letters or numbers in Clarion Mobile Map when you cannot avoid it.
English Owner’s Manual For further information about the map screen, see page 41. 4.3.1 Checking the details of a map location • If you are interested in the details of your current position during navigation: 1. Check the bottom line of the map. It shows the current street and house number information. 2. For further details, tap 3. Tap to open the Position menu. . The address, the coordinate and the list of nearby POIs will be displayed.
Action Description No buttons You can move the map into any direction. Tap the map at any desired location. The point you hit on the map moves to the center of the screen. If GPS position is available and you have moved the map, the button appears. Tap this button to return to the GPS position.
Action Button(s) Description English Gives you the following map perspectives in Clarion Mobile Map: • classic top-down view (2D), the top of the map always faces North , Owner’s Manual Viewing modes , • top-down view (2D), the top of the map always points in the current driving direction • perspective view (3D), the top of the map always points in the current driving direction The icon always shows the mode the button switches to: If you are in 3D mode, you can see the to 2D
Action Button(s) Description Tap one of the preset buttons to set the tilt and zoom levels to fix, predefined values. Smart Zoom is disabled. These buttons are available in 3D mode. Map scale Clarion Mobile Map shows the scale of the map in 2D mode. Tap&hold any of the buttons to set its value to the current tilt and zoom levels, or to reset it to its original value. English Tilt and zoom preset buttons (available in Advanced mode only) Owner’s Manual This button does not appear on the Map screen.
English Owner’s Manual 4.3.4 Status information and hidden controls on the map The following information appears in the rounded field in the top left corner, the Turn Preview field. When tapping this area, the result depends on the information currently shown. Icon Information Details Action There is no active route in Simple mode If there is no route to be navigated in Simple mode, this icon appears in the Turn Preview field. Tap this area to open Find Address.
The following area appears next to the above described rounded area. When tapping this area, the result depends on the information currently shown. Information Action There is no valid GPS position If there is no valid GPS position, this symbol appears here. Tap this area to open the GPS Data screen to check the signal status or the connection settings.
Icon color Icon color White Description The sound output of Clarion Mobile Map Description is muted. The sound output of Clarion Mobile Map The sound output of Clarion Mobile Map is muted. Icon Description color Icon Description color Description color White is enabled.
Icon Type More information English There are time values that can be shown: • Current GPS time • Time remaining to reach the destination Time information • Time remaining to reach the next via point Owner’s Manual • Estimated arrival time at the destination • Estimated arrival time at the next via point There are distance type values that can be shown: Distance information • Distance remaining to reach the destination • Distance remaining to reach the next via point • Current altitude The next are
The following options are available in Advanced mode only: English Button Action In the active route, uses the Cursor as the start point by replacing the current GPS position (available in Advanced mode only) Creates a new route with the Cursor as the destination. The previous route (if exists) is deleted.
4.4.2.3 Selected location (Cursor) Tap the map to let the map control buttons appear, and then tap and hold to open the Smart Zoom Settings window. Modify the zoom limits of Smart Zoom if necessary. If you select a location in the Find menu, or you tap the map, the Cursor appears at the selected point on the map. Clarion Mobile Map displays the Cursor with a radiating red dot ( ) to make it visible at all zoom levels, even when it is in the background of a 3D map view. 4.4.2.
4.4.3 Daytime and night color profiles English Clarion Mobile Map uses different color profiles during the day and during the night. • Daytime colors are similar to paper road maps. Owner’s Manual • The night color profiles use dark colors for large objects to keep the average brightness of the screen low. Clarion Mobile Map offers different daytime and night color profiles. It can also switch automatically between the daytime and the night schemes depending on the illumination setting. 6·Ferries.
Button Description Button Description Zooms in the map. Zooms out the map. , , , , Owner’s Manual When the map is open with a maneuver in the middle: To turn on NMEA/SIRF log saving, tap the following buttons: . 4.4.8 Route demonstration A simulation drives you through the route, following the driving instructions (page 29). You can choose from a simulation at high speed or at normal driving speed.
English category. If you save your own POI, you can select an icon for it independently of the POI category you have put it in.
4.4.10.1 Camera types Icon Type Description Mobile Some speed cameras are operated from vehicles. They do not always work and they are not set to check a preset speed limit. The warning is similar to fixed speed cameras, but as there is no speed limit given, only the proximity is announced. Built-in Some speed cameras are built into traffic lights. They work like fixed speed cameras, but they are difficult to spot. The warning for proximity and speeding is the same as for the fixed speed cameras.
English Owner’s Manual 4.4.10.2 Camera directions 4.4.11 Speed limit warning A speed camera can measure the speed of one direction of the traffic, both directions, or even several directions in an intersection, when they are mounted on a rotating base. The same directions apply to red light cameras. Clarion Mobile Map warns you only if you drive in a measured or possibly measured direction.
• if you need a simple route (a route with only one destination, without any intermediate via points), you can select the destination and start navigating to it right away If you are going to use a route later, save it before you start navigating. Tap the following buttons: Tip! , • you can plan a multi-point route (available in Advanced mode only) , . • you can also plan a route independently of your current GPS position or even without GPS reception (available in Advanced mode only) 5.1.
English Owner’s Manual Using the same screen, you can find an address by entering: • the exact address, including house number • the center of a city • an intersection • the midpoint of a street • any of the above, starting the search with the ZIP code (page 34) 5.1.2.1 Entering an address The parts of the address are shown on buttons. Start reading from the top, and if you want to change any of them, tap the button.
5.1.2.2 Entering an address if house numbering is restarted • Tap to open the list of results before it appears automatically. 4. Select the city from the list. 4. Enter the street name: a) Tap . b) Start entering the street name on the keyboard. The procedure is explained starting from the Navigation menu. • Tap to open the list of results before it appears automatically. (Simple 2. By default, Clarion Mobile Map proposes the country/state and city where you are.
English 5.1.2.3 Entering an address without knowing the district/suburb b) Start entering the street name on the keyboard. Long roads can run across several districts or suburbs. You may not know what particular house number is located where. In this case, follow the instructions below: c) Get to the list of results: Owner’s Manual The procedure is explained starting from the Navigation menu. 1. Tap the following buttons: mode), or , (Simple (Advanced mode). 2.
3. If needed, change the city: b) To enter a new city: • Tap the button with the name of the city, or if you have changed the country/state, tap . 6. Tap the desired intersecting street in the list. 7. The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. • Start entering the city name on the keyboard. 5.1.2.
• Start entering the city name on the keyboard. English • Get to the list of search results: 1) After entering a couple of characters, the names that match the string appear in a list. 2) Tap to open the list of results before it appears automatically. Owner’s Manual • Select the city from the list. 4 Tap the 5 The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. 5.1.2.
5.1.2.7 Tips on entering addresses quickly 2. Tap the Favorite that you want to set as your destination. 3. The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. Owner’s Manual • When entering the city name or the street name, tap the button after a couple of letters; Clarion Mobile Map lists the items that contain the specified letters. 1.
English detour it adds to the active route. This can be useful if you search for a later stopover that causes only a minimal detour, for example upcoming gas stations or restaurants. 3. You can narrow the search with the following: Owner’s Manual • Select the POI group (e.g. Accommodation), and after that, if needed, select the POI subgroup (e.g. Hotel or Motel). • To find the POI by its name, tap , and use the keyboard to enter a part of the name. • To list all POIs in a given POI group, tap . 4.
2. If necessary, move between pages with to 3. Tap the desired item. 5.1.7 Selecting the destination by entering its coordinates This feature is available in Advanced mode only. The procedure is explained starting from the Navigation menu. 1. Tap the following buttons: , . 2. [optional] Tap to change the format of the displayed coordinates. 3. Tap the latitude or longitude value to change the coordinates. 4.
Button Action English The selected point moves up in the list (becomes a via point to be reached earlier). Tap this button repeatedly, and the point becomes the start point of the route (when routing from a given location) or the first via point to reach (when routing from the GPS position). Owner’s Manual The selected point moves down in the list (becomes a via point to be reached later). Tap this button repeatedly, and the point becomes the final destination of the route.
Button The procedure is explained starting from the Map screen. Action 1. Tap the following buttons: The Action see Page38 The Action see Page38 As soon as you leave this screen, the route is recalculated automatically, and you can start navigating right away. 5.5 Viewing the entire route on the map (Fit-to-Screen) The map can be moved and scaled to show the whole line of the route. You do not need to manipulate the map manually. The Plan on Map feature does it for you.
English 5.9 Deleting the next via point from the route The easiest way to delete the upcoming route point (the next via point) is to open the Route Information screen by tapping the Turn Preview field ( ) on the Map screen, and then tapping . Owner’s Manual Alternatively, you can do it through the Navigation , , , . menu: 5.
5.13 Loading a saved route This feature is available in Advanced mode only. This feature is available in Advanced mode only. The procedure is explained starting from the Map screen. The procedure is explained starting from the Map screen. 1. Tap the following buttons: , , .
English 6. Reference Guide (Advanced mode) On the following pages you will find the description of the different menu screens of Clarion Mobile Map in Advanced mode. In Simple mode, these functions work the same way, but only a few of them are available. Owner’s Manual The Navigation menu: Clarion Mobile Map starts with the Navigation menu. From there you can access the following screens: Screen Button Description Map This button opens the Map screen.
Name Owner’s Manual Symbol Action Turn Preview, that is, the next route event Opens the Route Information screen Second upcoming route event Opens the Itinerary Trip data Opens the Trip Information screen GPS position quality Opens the Quick menu Vehicle used in route calculation Opens the Quick menu Top row Next street or Next city Additional buttons and controls appear for a few seconds Bottom row Current street and house numbers on left and right Additional buttons and controls appear
Symbol Name Action English Owner’s Manual Position menu (appears when navigating a route) Opens the Position menu Cursor menu (appears when there is no GPS position or the Cursor is not at the current GPS position) Opens the Cursor menu Tap this button to show or hide the following map control buttons: • Zoom in/out • Rotate left/right (3D map only) Open/Close Map control buttons • Tilt up/down (3D map only) • Zoom preset buttons (2D map only) • Tilt and zoom preset buttons (3D map only) • Return t
Symbol Name Blue line Tap one of the preset buttons to set the zoom level to a fix, predefined value. Smart Zoom is disabled. These buttons are available in 2D mode. Tap&hold any of the buttons to set its value to the current zoom level, or to reset it to its original value. Tap one of the preset buttons to set the tilt and zoom levels to fix, predefined values. Smart Zoom is disabled. These buttons are available in 3D mode.
• Bluetooth connection and communication status Icon Vehicle type English Owner’s Manual 6.1.1.1 GPS position quality and Vehicle type indicator Car This area is a multiple status indicator, and also acts as a button that opens the Quick menu. Taxi GPS reception quality shows the current accuracy of the position information. Bus Icon Clarion Mobile Map has no connection to the GPS receiver: GPS navigation is not possible. Devices with a built-in GPS receiver are permanently connected.
6.1.1.4 Next two route events (Turn Preview fields) Icon Description , Board ferry. , Leave ferry. , Approaching the next via point. , Approaching the destination. Icon Description Owner’s Manual Most of these icons are very intuitive and you also know them as road signs. The following table lists some of the frequently shown route events.
English Owner’s Manual Type Description Elevation model Hills and mountains are shown in the background of the 3D map view, and illustrated by color on the 2D map. Elevated roads Complex intersections and vertically isolated roads (such as overpasses or bridges) are displayed in 3D. 3D buildings Full 3D city building data that represents actual building size and position on the map. Building data is limited to the city centers of major cities in the US and Europe.
Symbol Description Streets and roads that are excluded from the navigation You can choose whether you want to use or avoid certain road types (page 65). However, when Clarion Mobile Map cannot avoid such roads, the route will include them and it will show them in a color that is different from the route color. English Name The first point of the route. Owner’s Manual Normally if GPS position is available, it is the start point of the route.
Button Description English Closes the Cursor menu, and returns to the previous screen. Zooms out the map. Zooms in the map. Owner’s Manual With the Cursor menu open, you can still move or scale the map, and tap the map anywhere to place the Cursor to a new location, but when you use this button, the Cursor jumps back to the place where it was at the time when you opened the Cursor menu. Displayed at the Cursor if it is at the same location with which the Cursor menu was opened.
Button Description This button is similar to the button, but a new screen opens, and the route is calculated with all the possible route calculation methods (Fast, Short, Economical and Easy). Observe the results, and choose one of the routes to navigate. The Cursor becomes the start point of the route. This means that the route is not started from the current GPS position, and Automatic Off-route Recalculation needs to be turned off to keep the selected point as the start point.
6.1.6 Route Information screen English The Route Information screen has all the data and some of the functions you need while you navigate. There are two ways to open this screen: • It can be opened directly from the Map screen by tapping the Turn Preview field ( ). Owner’s Manual • In Advanced mode, from the Navigation menu tap the following buttons: , . In the top section of the screen you see information about the current route.
Description Warning icons In these square fields graphical symbols are displayed in case warnings are attached to the planned route. These are Tap any of the icons for an warnings, so icons always show information for the whole explanation. route, even if the data fields display values from your current position to a via point only. Function English Name Owner’s Manual Opens the Route Planning options screen from theSettings menu. Opens the map screen designed for route planning.
English Owner’s Manual Name Description Function Compass Shows the current heading. Tap this field to show it on the map screen in one of the Trip Data fields. Speedometer Shows the current speed both graphically and as a number. Tap this field to show it on the map screen in one of the Trip Data fields. Distance Remaining Shows the distance you need to travel on the route before reaching your final destination. Tap this field to show it on the map screen in one of the Trip Data fields.
Most of the fields on this screen have a symbol Symbol Description This value appears on the map screen in the Trip Data area. This is the value at the top. This value appears on the map screen in the Trip Data area. This is the value in the middle. This value appears on the map screen in the Trip Data area. This is the value at the bottom. 6.1.7.1 Trip Computer screen The Trip Computer screen provides collected trip data. It can be opened from the Trip Information screen by tapping .
English Main function (single tap) Function (tap and hold) Master Volume slider Adjusts the sound volume of the device. All sounds of the application are affected. n/a If you only adjust the volume, you need to use this button to return to the Map screen. Opens the Navigation menu. Mutes all sounds of Clarion Mobile Map. Opens Sound settings. Owner’s Manual Button Switches between the daytime and night color schemes manually.
6.1.9 GPS Data screen , and then to open the GPS Data screen and to see the English Tap the following buttons: status of GPS reception. Owner’s Manual Icon Color Name Description Green Clarion Mobile Map has a connection to the GPS receiver and GPS position information is available in 3D: Clarion Mobile Map can calculate both your horizontal and vertical GPS position.
Icon Color Name Description English Owner’s Manual The virtual sky shows the visible part of the sky above you, with your position as the center. The satellites are shown at their current positions. The GPS receives data from both the green and yellow satellites. Signals from the yellow satellites are only received, while green ones are used by the GPS receiver to calculate your current location. Sky view circle n/a Coordinates Your current GPS position in WGS84 format.
Button Reference page 39 English Description Opens a screen with useful route data. You can browse the driving instructions that Clarion Mobile Map follows page 24 during navigation. You can exclude maneuvers or streets to adjust the route to your preferences. page 38 Owner’s Manual You can modify the route: remove route points or change their order. Erase the active route with all its route points (start point, via points and page 40 destination).
Button English Description Reference Creating, renaming or deleting Saved Search Criteria page 62 You can manage the data you have saved (e.g. POIs, Favorites or History) and the settings you have made in the program. page 62 Owner’s Manual 6.4.1 Manage Saved Routes 6.4.3 Manage Track Logs You can manage the previously saved routes. Tap the following buttons: You can record Track Logs, then play them back, display them on the map, and view their details. Tap the following buttons: , , .
Button Description Button with the name of the POI group Opens the list of the subgroups of this POI group. The new list behaves the same as this one. The map returns with the Track Log. The map is scaled to show the whole Track Log. Button with Opens the selected POI for the name editing. Only the POIs you have and address created appear in this list. of a POI item Deletes the selected Track Log. Opens the selected POI group for editing.
Button Description Button Description English The distance buttons set the zoom level from which the items in the POI group will be shown on the map. Tap this button to enter additional information for the POI. Tap this button to delete the selected POI. Owner’s Manual Subgroups under the edited POI group will inherit the visibility settings of the POI group. Tap this button to move the POI to another POI group or subgroup. 6.4.
Button Description button in the Cursor menu. Tap this button to All user data and the current settings will be saved on the inserted memory card. There is always one backup file. If you perform a backup later, the previous backup will be overwritten with the new information. All user data will be deleted, and settings will return to their factory defaults. The application needs to restart. Owner’s Manual All user data and settings will be overwritten with the information stored in the backup file.
Button English Owner’s Manual Description Reference You can enable some useful warnings, and disable the touch screen in a moving vehicle with Safety Mode. page 69 You can modify the look and behavior of the Menu screens. page 70 You can fine-tune device related settings in this menu. page 71 You can set up automatic Track Log saving and fine-tune related settings. page 71 This screen has no navigation feature.
Button Description English Elevation on 2D maps can also display 3D information. These top-down maps can display elevation by 2D Map colors and shading. Street names and POI icons can be disturbing on the map during navigation. With this switch you can suppress these map elements when Clarion Mobile Map is following your position on the map. If you move the map, both the street names and POI icons reappear immediately.
6.5.3 Route Planning options English These settings determine how routes will be calculated. Tap the following buttons: Button Vehicle Owner’s Manual Road Types Used for Route Planning Route Calculation Method , , . Description You can set the type of vehicle you will use to navigate the route. Based upon this setting, some of the road types can be excluded from the route, or some of the restrictions may not be taken into account in route calculation.
Description Crossborder planning In some cases the route calculated according to your other navigation and route preferences would lead through another country. If you wish to always stay within the same country, turn this option off. Carpool/ HOV This control appears only when navigating in the USA. You should check whether you are allowed to use carpool lanes before enabling this road type.
Button Description English Set Date & You can set the date and time format. Various international formats are available. Time Format Time and Time Zone Settings You can access time and time zone settings. Clarion Mobile Map helps you with correcting the device time to the ever accurate GPS time. Clarion Mobile Map can also help you set the time zone based on your current GPS position.
Description Off-route Recalculation This switch tells Clarion Mobile Map whether to automatically recalculate the route when you deviate from it. If this feature is turned off, you need to initiate route recalculation manually otherwise navigation will be stopped until you return to the originally recommended route. Owner’s Manual Setting another point than the current GPS position as the start point of the active route will automatically disable this feature.
Button Description English Warn When Maps may contain information about the speed limits of the road segments Clarion . Mobile Speeding Mapis ableto warn you if you exceed the currentlimit This information may not be available. foryour region ask your local dealer or may not befully correctfor allroads in them( ), ap. This setting lets you decide whether you wish to receive the warnings Youcan setthe re.
6.5.8 Device settings , , . Description Screen Calibration You can fine-tune the position of the screen content on the display. Tap this button, use the arrows to reposition the application window, and then tap to save the changes and exit. GPS Antenna This field indicates whether the external GPS antenna is connected to your Clarion NP401. Owner’s Manual Button English You can fine-tune device related settings in this menu. Tap the following buttons: 6.5.
English 7. Glossary Owner’s Manual 2D/3D GPS reception Map The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
Scheme One daytime scheme and one night scheme is always selected. Clarion Mobile Map uses them when it switches from day to night and back. In Track-up mode the map is rotated so its top always points in the current driving direction. This is the default orientation in 3D map view mode. See also: North-up map orientation. Road Safety Camera A special POI type for speed cameras and red light cameras.
reference to Act IV of 1959 on the Civil Code and to Act LXXVI of 1999 on Copyrights shall apply. English 3.2 The original language version of this Agreement is the Hungarian version. This Agreement has versions in other languages as well. In case of dispute the Hungarian version shall prevail. Owner’s Manual 4 Object of the Agreement 4.1 The object of this Agreement shall be the navigation guidance software product of Licensor (hereinafter referred to as the Software Product). 4.
7.1.4 to decompile the Software Product; 7.1.6 to modify, extend, transform the Software Product (in whole or in part), to separate it into parts, combine it with other products, install it in other products, utilize it in other products, not even for the purpose of achieving interoperability with other devices; 7.1.
English 8.6 By concluding the Agreement, the User shall, in particular, acknowledge the information stated in Section 8 above. 9 Sanctions Owner’s Manual 9.1 The Licensor hereby informs the User that, if the Licensor finds its rights under the Copyright Act to be breached, the Licensor may 9.1.1 seek judicial recognition of this breach; 9.1.2 demand that the breach cease and order the person in breach to refrain from continuing such actions; 9.1.
9. Troubleshooting Nothing happens when buttons are pressed. Display is not accurate. Measure Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Consult your store of purchase. Turn off the power and open the operation panel. Press the reset button with a thin rod. The microprocessor Note: has malfunctioned When the Reset button is pressed, turn off the ACC power. due to noise, etc. * When the Reset button is pressed, stored in memory are cleared.
English 10. Specifications Navigation Owner’s Manual Memory: NAND Flash Memory Upgrade Platform: USB TTS (Text to Speech): Street Announcements Find Menu: Address, POI, History, Coordinates, Favorites, Plan on map POI: 12 million Road Selection: Unpaved, Permit needed, Motor ways, Toll, Ferries, Border crossing, Carpool lanes General Power source voltage: 14.4 V DC (10.8 to 15.
3. General Cautions English 1. Do not open the case. There are no user- serviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized Clarion service center. 2. Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently. 1. 2. 3. Owner’s Manual 4.
English VX401 Owner’s Manual Connector Cable Antenna Antenn a assembly VZ401 Antenna Connector Cable Connector Cable 80 Antenn a assemb Antenna assembly NP401 NP401 OM_100920_EN.
Clarion Co., Ltd. All Rights Reserved. Copyright © 2011: Clarion Co., Ltd. Printed in China / Imprime au Chiné / Impreso en China 2011/01 NP401 OM_100920_ES.
