User Manual Clarion Mobile Map Navigation software for Clarion NP509 (System Mode) NP509
Copyright note The product and the information contained herein is subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Clarion. © 2008 - Clarion Data Source © 2006 Tele Atlas N.V. All rights reserved.
Thank you for choosing the Clarion NP509 as your in-car navigator. This document is the detailed description of the software when connected to a Clarion Multi Media Station (System mode). When you have a different display that you connected your Clarion NP509 to, please, refer to the separate document describing the Stand-alone operating mode of Clarion Mobile Map.
Table of contents 1 Warnings and Safety information .................................................................................. 7 2 Getting started with Clarion Mobile Map ..................................................................... 8 2.1 Simple and Advanced modes .................................................................................................. 10 2.2 Buttons and other controls on the screen ...............................................................................
3.1.3 Selecting the destination from your Favorites................................................................................36 3.1.4 Selecting the destination from the POIs .........................................................................................36 3.1.5 Selecting the destination with saved POI search criteria ............................................................... 38 3.1.6 Selecting the destination from the History ..........................................................
4.4.4 Manage Favorites ...........................................................................................................................63 4.4.5 Manage POIs.................................................................................................................................. 63 4.4.6 Manage Saved Search Criteria .......................................................................................................64 4.4.7 User Data Management..........................................
1 Warnings and Safety information Clarion Mobile Map is a navigation system that helps you find your way to your destination with its GPS receiver. Clarion Mobile Map does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate Clarion Mobile Map before you start your journey.
2 Getting started with Clarion Mobile Map Clarion Mobile Map is optimized for in-car use. You can use it easily by tapping the screen buttons and the map with your fingertips. Clarion Mobile Map can plan routes throughout the whole installed map set; you do not need to change maps or switch to a poorly detailed general map to navigate between map segments or countries. Tasks Double tapping the screen Tapping and holding the screen Instructions You do not need to tap the screen twice for any action.
Tasks Gestures (drag&drop) Instructions You do not need gestures to access the basic navigation features. You need to drag and drop the screen only in cases like: x Moving the handle on a slider. x Shortcut to open the Map screen: slide your finger from the bottom right corner to the bottom left corner on any screen. x Shortcut to open the Navigation menu: slide your finger from the top left corner to the bottom left corner on any screen.
x Use a saved location: x a Favorite (page 36) x a POI (page 36) x the History of previously set destinations and waypoints (page 38) 2.1 Simple and Advanced modes The two operating modes of Clarion Mobile Map mainly differ in the menu structure and the number of available features. The controls and screen layouts are the same. x Simple mode: you have easy access to the most important navigation functions and the basic settings only.
Type of action Menu settings Available in Available in Simple mode Advanced mode Only background picture Yes (from Quick Menu) Yes Only language selection No Sound settings Route Planning options Regional settings Warnings Explanation Yes See page 72 Yes See page 67 Yes Yes See page 68 See page 69 Yes See page 71 2.2 Buttons and other controls on the screen When you are using Clarion Mobile Map, you usually tap buttons on the touch screen.
Description How to use it Switch Type Example When there are only two choices, a checkmark shows whether the feature is enabled. Tap it to turn the switch on or off. Virtual keyboard Each key is a touch Alphabetic and alphanumeric keyboards to screen button. enter text and numbers. 2.2.1 Using keyboards You only need to enter letters or numbers in Clarion Mobile Map when you cannot avoid it.
2.3 Using the map The map screen is the most frequently used screen of Clarion Mobile Map. It can be accessed from the Navigation menu by tapping . For further information about the map screen, see page 45. 2.3.1 Checking the details of a map location x x x If you are interested in the details of your current position during navigation: 1. Check the bottom line of the map. It shows the current street and house number information. 2. For further details, tap 3. Tap displayed.
x Selected location (Cursor): (page 21) The following controls help you modify the map view to suit your actual needs the best. Most of these controls appear only if you tap the map once, and disappear after a few seconds of inactivity. Action Moving the map Button(s) No buttons Description You can move the map into any direction. Tap the map at any desired location. The point you hit on the map moves to the center of the screen. If GPS position is available and you have moved the button appears.
Action Button(s) Viewing modes , , Description Gives you the following map perspectives in Clarion Mobile Map: x classic top-down view (2D), the top of the map always faces North x top-down view (2D), the top of the map always points in the current driving direction x perspective view (3D) the top of the map always points in the current driving direction The icon always shows the mode the button switches to: If you are in 3D mode, you can see the button and you need to tap it to switch to 2D mode.
Action Button(s) Fit-to-screen Description This button does not appear on the Map screen. It is available on the following screens: Repeat Voice Instruction x Plan on Map screen: When you have an active route, you can display it in its full length on the map. x Track Information screen: A track log can be displayed in its full length on the map. Tap this button to repeat the current voice instruction. The distance is updated to always describe the current situation. 2.3.
Icon , Information Details If the icon is a static picture, route calculation is needed , Action There is no valid GPS If an active route exists, and Tap this area to open the position. there is no valid GPS position, Route Information screen. the view of the sky above you is shown with colored dots for each satellite. Some dots need to turn green to be able to navigate.
Icon Information Details Action Stops the running simulation This icon appears during Route Fly Over, Route Simulation, and Track Log playback. Route recalculation progress During route recalculation, this Nothing happens if you tap this area of the screen. field shows the recalculation progress between 0% and 100%. Indicator strip - sounds muted/enabled - Track Log recording Tap this area to stop the simulation.
Icon Type Time information Distance information More information There are time values that can be shown: x Current GPS time x Time remaining to reach the destination x Time remaining to reach the next via point x Estimated arrival time at the destination x Estimated arrival time at the next via point There are distance type values that can be shown: x Distance remaining to reach the destination x Distance remaining to reach the next via point x Current altitude The next area is a combine
Button Action Creates a new route with the Cursor as the destination. The previous route (if exists) is deleted. In the active route, uses the Cursor as a via point (an intermediate destination) preceding the destination (available in Advanced mode only) In the active route, uses the Cursor as the destination while keeping the previous destination as a via point (available in Advanced mode only) Shows the different routes calculated by the available routing methods.
2.4.2 Position markers 2.4.2.1 Current GPS position and Lock-on-Road When your GPS position is available, Clarion Mobile Map marks your current position with the icon on the map. The icon may not show your exact GPS position and heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors, and the direction of the icon is aligned to the direction of the road.
x a Road Safety Camera x a POI x a map marker Pin 2.4.2.4 Original position in the Cursor menu When the Cursor menu is open, a special icon ( opened with. ) shows the Cursor position the menu was You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor ) appears, and the buttons of the Cursor menu initiate actions for this new location. ( To return to the original Cursor position, tap Cursor menu was opened, and the .
x x x Easy Vehicle types : x Car x Taxi x Bus x Emergency vehicles Road types x Unpaved Roads x Permit Needed x Freeways x Toll Roads x Charge Roads x Ferries x Cross-border Planning x Carpool (appears only when used in the USA) Clarion Mobile Map automatically recalculates the route if you deviate from the proposed itinerary. For further information about Route Planning options, see page 68. 2.4.
Button Description Changes the detail level of the Itinerary. The levels are as follows: x Detailed Instructions: all intersections are listed x Itinerary: only significant intersections (the ones announced in voice guidance) are listed x Road list: the list of the roads used while navigating the route Moves between pages for additional list items. , When the map is open with a maneuver in the middle: Button Description Zooms in the map. Zooms out the map.
(high Route demonstrations can be started from the Route menu by tapping the speed simulation) or the (simulation at normal speed) button. 2.4.9 POI (Points of Interest) A point of interest (POI) is a location that someone might find useful or interesting. Clarion Mobile Map is delivered with thousands of POIs and you can also create your own POIs in the application. POI locations are marked on the map with special icons. POI icons are quite large so you can easily recognize the symbol.
Saving Road Safety Cameras To save the location of a Road Safety Camera, place the Cursor ( tap the following buttons: Note! , ) at the desired location, then , . This button is not displayed when GPS position is not available or if you are in certain countries where Road Safety Camera warning is prohibited. Even if the button is available, you are responsible for checking whether it is legal to use this feature at your location.
Icon Type Description Section control These speed cameras work in pairs, and do not measure your current speed but your average speed between the two speed cameras. Both identify your car and record the exact time you pass them. They use the difference between the two points in time to calculate your average speed.
3 Navigating with Clarion Mobile Map You can set up your route in Clarion Mobile Map in several ways: x if you need a simple route (a route with only one destination, without any intermediate via points), you can select the destination and start navigating to it right away x you can plan a multi-point route (available in Advanced mode only) x you can also plan a route independently of your current GPS position or even without GPS reception (available in Advanced mode only) 3.
Tip! If you know that you will use a destination later, when the Cursor menu appears, save it as a POI (in Advanced mode only), or put it on the list of your Favorites first. The Cursor menu returns automatically with the same point. Now you can use it as a route point. 3.1.2 Entering an address or part of an address If you know at least a part of the address, it is the quickest way to select the destination of the route.
4. 4. After entering a couple of characters, the names that match the string appear in a list. x Tap automatically. to open the list of results before it appears Select the city from the list. Enter the street name: 1. Tap . 2. Start entering the street name on the keyboard. 3. Get to the list of results: 4. 5. x x After entering a couple of characters, the names that match the string appear in a list. x Tap to open the list of results before it appears automatically.
x To enter a new city: 1. Tap the button with the name of the city, or if you have changed the 2. Start entering the city name on the keyboard. 3. Get to the list of search results: country/state, tap 4. 4. x After entering a couple of characters, the names that match the string appear in a list. x Tap automatically. to open the list of results before it appears Select the city from the list. Enter the street name: 1. Tap 2. Start entering the street name on the keyboard. 3.
3.1.2.3 Entering an address without knowing the district/suburb Long roads can run across several districts or suburbs. You may not know what particular house number is located where. In this case, follow the instructions below: The procedure is explained starting from the Navigation menu. (Simple mode), or , (Advanced mode). 1. Tap the following buttons: 2. By default, Clarion Mobile Map proposes the country/state and city where you are.
3. to finish entering the address. Tap 6. A list appears with the matching addresses. Tap the desired one. 7. The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. 3.1.2.4 Selecting an intersection as the destination The procedure is explained starting from the Navigation menu. 1. Tap the following buttons: 2.
x If only a few intersecting streets exist, their list appears immediately. x In case of a longer street, a keyboard screen appears. Start entering the name of the intersecting street on the keyboard. As you type, if the matching streets can be shown on one screen, their list appears automatically. 6. Tap the desired intersecting street in the list. 7. The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu.
3.1.2.6 Entering an address with a ZIP code All of the above address searching possibilities can be performed with entering the ZIP code instead of the city name. Find below an example with a full address: The procedure is explained starting from the Navigation menu. (Simple mode), or , (Advanced mode). 1. Tap the following buttons: 2. By default, Clarion Mobile Map proposes the country/state and city where you are.
3.1.2.7 Tips on entering addresses quickly x When you are entering the name of a city or a street, Clarion Mobile Map only displays those characters that appear in possible search results. The other characters are grayed out. x button after a couple When entering the city name or the street name, tap the of letters; Clarion Mobile Map lists the items that contain the specified letters.
x : The map appears with the Cursor in the middle. Modify the location of the Cursor if necessary, then tap location. x : The POI will be searched for around the current GPS position. x : The POI will be searched for around the destination of the active route. x 3. 4. . The POI will be searched for around the given : The POI will be searched for not around a given point, but by the size of the detour it adds to the active route.
3.1.5 Selecting the destination with saved POI search criteria POI search criteria can be saved in the POI section of the Manage menu, but Clarion Mobile Map is already shipped with some saved criteria you can use instantly when searching for a POI. The procedure is explained starting from the Navigation menu. 1. (Simple mode), or Tap the following buttons: , 2. Tap 3. Select one of the saved criteria, and the list of matching POIs appears. 4. Tap the desired POI in the list. 5.
4. Enter the coordinate values in WGS84 format on the keyboard: the latitude (N or S) and the longitude (E or W). 5. Tap 6. The map appears with the selected point in the middle. Tap . (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. 3.2 Creating a multi-point route (inserting a via point) Multi-point routes are created from simple routes, so a route must be active first.
3.3 Creating a multi-point route (appending a new destination) destination Multi-point routes are created from simple routes, so a route must be active first. One of the ways of expanding the route is to add a new destination. The previous destination becomes the last via point of the route. This feature is available in Advanced mode only. 1. Select a new location as you did in the previous sections. This will be the additional destination in the route. 2.
3.5 Viewing the entire route on the map (Fit-to-Screen) The map can be moved and scaled to show the whole line of the route. You do not need to manipulate the map manually. The Plan on Map feature does it for you. In Advanced mode you have the following options to enter Plan on Map: x Via the Find menu: tap x Via the Route Information screen: tap x Via the Route Information screen using a shortcut: tap , , . , , , , . . In Simple mode the last option is available only. 3.
3.8 Pausing the active route You do not need to pause the active route: when you start driving again, Clarion Mobile Map restarts the voice instructions from your position. 3.9 Deleting the next via point from the route The easiest way to delete the upcoming route point (the next via point) is to open the Route Information screen by tapping the Turn Preview field ( ) on the Map screen, and then tapping . Alternatively, you can do it through the Navigation menu: , , , . 3.
The procedure is explained starting from the Map screen. Recording the traveled path (creating a Track Log) 1. Start driving. 2. Tap the following buttons: 3. Start the recording: tap the , , . button. You return to the map and you can continue driving. 4. Repeat the above steps, then tap Map labels the Track Log with a time stamp. later to stop the recording. Clarion Mobile button in the Quick menu to start, and later to stop the Track (As an alternative, you can tap the Log recording.
3.12 Saving the active route This feature is available in Advanced mode only. The procedure is explained starting from the Map screen. , , 1. Tap the following buttons: 2. Enter a name for the saved route, and then tap . .
4 Reference Guide (Advanced mode) On the following pages you will find the description of the different menu screens of Clarion Mobile Map in Advanced mode. In Simple mode, these functions work the same way, but only a few of them are available. The Navigation menu: Clarion Mobile Map starts with the Navigation menu. From there you can access the following screens: Screen Button Description Map The Map screen.
Symbol Name Trip data GPS position quality Vehicle used in route calculation Opens the Quick menu Opens the Quick menu Additional buttons and controls appear for a few seconds Current street and house Additional buttons and controls appear for a few seconds numbers on left and right Top row Next street or Next city Bottom row Map view modes , Action Opens the Trip Information screen , Menu Detour Position menu (appears when navigating a route) Switches between 2D and 3D map modes: x 2D Nort
Symbol Name Action Rotate left, rotate right Rotates the 3D map left or right Tilt up, tilt down Tilts the 3D map Zoom in, zoom out Scales the map , , , Return to GPS position Tap this button to move the map back (appears when GPS position is to the current GPS position. If the map available and you have moved has been rotated, automatic map the map) rotation is also re-enabled. Enable Smart Zoom (replaces Tap this button once to enable Smart the previous button if there is no Zoom.
Symbol Name Action Speed limit n/a Repeat Voice Instruction Tap this button to repeat the current voice instruction. The distance is updated to always describe the current situation. 4.1.1 Icons on the map There are several status icons on the map. Most of them also function as a button. The information they provide is as follows: x GPS position quality x Vehicle type used for route calculation x Sound status (muted or enabled) x Track log recording status 4.1.1.
Icon Vehicle type Bus Emergency vehicles 4.1.1.2 Status indicator strip This is a multiple status indicator. It indicates the following status information on a single strip: Icon Description The sound output of Clarion Mobile Map is muted. The sound output of Clarion Mobile Map is enabled. Clarion Mobile Map records a Track log when GPS position is available. Track log recording is disabled. 4.1.1.
Icon Description Exit freeway. , Board ferry. , Leave ferry. , Approaching the next via point. , Approaching the destination. , In certain situations when route events are not important, these fields show other useful pieces of information. They are described here: page 16. 4.1.2 Objects on the map 4.1.2.1 Streets and roads Clarion Mobile Map shows the streets in a way that is similar to how the paper road maps show them.
4.1.2.3 Elements of the active route Clarion Mobile Map shows the route in the following way: Symbol Name Current GPS position Cursor (selected map location) Start point Description Your current position displayed on the map. If roads are near, it is aligned to the nearest road. The location selected in the Find menu, or a map point selected by tapping the map. The first point of the route. Normally if GPS position is available, it is the start point of the route.
4.1.3 Detour menu This screen contains quick detour possibilities during navigation. It can be opened directly from the Map screen by tapping . You have the following options: x On the main part of the screen you can see the first page of Saved Search Criteria. Select any of the criteria to quickly receive the list of nearest matching POIs, and instantly plan a new route to the desired one, or insert it as a via point in your active route.
The following options are available in Advanced mode only: Button Description Creates a new route with the Cursor as the destination. The previous route (if exists) is deleted. If the Cursor is at or near the destination, this button replaces the previous one, and deletes the current destination from the route. The last via point is promoted as destination, or if there are no via points, the route is deleted.
4.1.5 Position menu When you follow the recommended route on the map (the Cursor is the current GPS position), the Position menu replaces the Cursor menu. It does not contain buttons that modify the current route, as the GPS position is not useful as a route point. . To open the Position menu, tap 4.1.6 Route Information screen The Route Information screen has all the data and some of the functions you need while you navigate.
Name Description Function either displays the Route Calculation Method or the content of all data fields to via Vehicle field from the Route Planning options. point information. Warning icons In these square fields graphical symbols are Tap any of the icons for an displayed in case warnings are attached to the explanation. planned route. These are warnings, so icons always show information for the whole route, even if the data fields display values from your current position to a via point only.
Name Speedometer Distance Remaining Time Remaining Arrival Time GPS Time Altitude Speed Limit Description Function Shows the current speed both graphically and as a Tap this field to show it on the number. map screen in one of the Trip Data fields. Shows the distance you need to travel on the route Tap this field to show it on the before reaching your final destination. map screen in one of the Trip Data fields.
Symbol Description This value appears on the map screen in the Trip Data area. This is the value at the bottom. 4.1.7.1 Trip Computer screen The Trip Computer screen provides collected trip data. It can be opened from the Trip Information screen by tapping . The fields on this screen are continuously updated while you keep the screen open. You can switch between the trips, pause then resume them, or reset their data.
Button Main function (single tap) Function (tap and hold) Switches between the daytime and night color Opens Color Profiles settings. schemes manually. This will not disable the automatic switching between the two schemes: the other color scheme returns later. 3D buildings can be displayed on the map. Use this Opens 3D Settings. switch to suppress them temporarily. Tap this button and select the Vehicle type to be Opens Route Planning used for route calculation. Otherwise it is selected options.
Icon Color Name Description receiver, this status should not appear under normal circumstances. Green, blinking GPS connection quality indicator Yellow, blinking Clarion Mobile Map has no connection to the GPS receiver but it is still trying to establish a connection. Clarion Mobile Map has no connection to the GPS receiver and is not trying to establish a connection. Red, blinking The virtual sky shows the visible part of the sky above you, with your position as the center.
Button Description Reference Opens a special 2D map screen optimized for route planning. Only the Zoom in and Zoom out buttons and the route modification buttons of the Cursor menu appear. 4.3 Route menu Save, load and edit your routes. Tap the following buttons: Button , . Description Opens a screen with useful route data. Reference page 54 You can browse the driving instructions that Clarion Mobile page 23 Map follows during navigation.
4.4 Manage menu You can manage the content that Clarion Mobile Map stores. Tap the following buttons: Button Description , .
4.4.2 Manage History You can manage the list of locations you used lately. Tap the following buttons: , , . Button Description Deletes the selected item in the History. Deletes the entire History. Moves between pages for additional list items. , 4.4.3 Manage Track Logs You can record Track Logs, then play them back, display them on the map, and view their details. Tap the following buttons: , Button , . Description Starts recording the track that you drive.
4.4.4 Manage Favorites You can manage the list of your Favorites. Tap the following buttons: Button , , . Description Button with the name of the Favorite Opens the selected Favorite for editing. Deletes the selected item in the list of Favorites. Clears the list of Favorites. Moves between pages for additional list items. , 4.4.5 Manage POIs You can manage your POIs, and set POI visibility for both your POIs and the ones that came with the product. Tap the following buttons: , , .
Button Description Subgroups under the edited POI group will inherit the visibility settings of the POI group. Button with the icon of the POI group Tap this button to select a new icon for the POI group. Deletes the edited POI group. You are only allowed to remove POI groups that you have created. When a POI item is open for editing: Button Button with the name of the POI Button with the icon of the POI Description Tap this button to rename the POI. Tap this button to select a new icon for the POI.
4.4.7 User Data Management You can manage the data you have saved (e.g. POIs, Favorites or History) and the settings you have made in the program. Tap the following buttons: Button , , . Description Map locations can be marked with Pins using the button in the Cursor menu. Tap this button to remove all your Pins from the map. All user data and the current settings will be saved on the inserted memory card. There is always one backup file.
Button Description Reference You can control how Clarion Mobile Map behaves during page 70 navigation. You can enable some useful warnings, and disable the touch page 71 screen in a moving vehicle with Safety Mode. You can modify the look and behavior of the Menu screens. You can fine-tune device related settings in this menu. page 72 page 72 You can set up automatic Track Log saving and fine-tune page 73 related settings. This screen has no navigation feature.
Button Description Elevation on 2D Map 2D maps can also display 3D information. These top-down maps can display elevation by colors and shading. Street Names During Navigation Street names and POI icons can be disturbing on the map during navigation. With this switch you can suppress these map elements when Clarion Mobile Map is following your position on the map. If you move the map, both the street names and POI icons reappear immediately.
4.5.3 Route Planning options These settings determine how routes will be calculated. Tap the following buttons: , , . Button Description Vehicle You can set the type of vehicle you will use to navigate the route. Based upon this setting, some of the road types can be excluded from the route, or some of the restrictions may not be taken into account in route calculation.
Type Permit needed Description You might need a permit or permission from the owners to use certain roads or to enter certain areas. Clarion Mobile Map excludes these roads from the route calculation by default. Ferries Clarion Mobile Map includes ferries in a planned route by default. However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries.
Button Description Units You can set the distance units to be used by the program. Clarion Mobile Map may not support all the listed units in some voice guidance languages. If you select a measurement unit not supported by the chosen voice guidance language, a warning message will appear. Set Date & Time Format You can set the date and time format. Various international formats are available. Time and Time Zone Settings You can access time and time zone settings.
Button Description of the active route will automatically disable this feature. Restore Lock-to-Position If you have moved or rotated the map during navigation, this feature moves the map back to your current GPS position and re-enables automatic map rotation after the given period of inactivity. Automatic Overview This feature switches the map view to Overview mode when the next route event is at a distance. Overview is a zoomed out 2D view to let you see the surrounding area.
Button Description checking whether it is legal to use this feature at your location. Safety Mode Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road. While driving, you will not be able to set a new destination or to change settings. The only screen control that remains enabled is the gesture that puts you back on the Map screen. 4.5.7 Menu settings You can modify the look and behavior of the Menu screens. Tap the following buttons: , , .
4.5.9 Track Log settings You can set up automatic Track log saving, and fine-tune related settings. Tap the following buttons: , , Button . Description Update Interval This determines how often track points will be saved. Position information is normally received once a second from the GPS. If you do not need such a detailed log, you can increase this number to save track log space. Enable Auto-saving When auto-saving is enabled, you do not need to turn track log saving on and off manually.
5 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
Overview mode You can instruct Clarion Mobile Map to automatically switch to Overview mode if the next route event is in a distance. In Overview mode the map is shown in 2D but scaled down to a predefined zoom level. When you approach the next route event, the previous 2D or 3D map view returns automatically. Route A series of destinations to be reached one after the other. A simple route contains one start point and only one destination.
6 End User License Agreement 1 The contracting parties 1.1 This Agreement has been entered into by and between Nav N Go Kft. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary; Company reg.no.: 01-09-891838) as Licensor (hereinafter: Licensor) and You as the User (hereinafter: User; the User and the Licensor jointly referred to as: Parties) in subject of the use of the software product specified in this Agreement. 2 Conclusion of the Agreement 2.
6.2 The User is entitled to make one backup copy of the Software Product. However, if the Software Product operates after installation without the use of the original media copy, then the original media copy shall be deemed to be a backup copy. In all other cases, the User is only entitled to use the backup copy if the original media copy of the Software Product has been ascertainably and unequivocally rendered unsuitable for its lawful and intended use. 7 Limitations of use 7.1 The User is not entitled 7.
9.1 The Licensor hereby informs the User that, if the Licensor finds its rights under the Copyright Act to be breached, the Licensor may 9.1.1 seek judicial recognition of this breach; 9.1.2 demand that the breach cease and order the person in breach to refrain from continuing such actions; 9.1.3 demand that the person under breach give proper compensation (even by way of publicity at the expense of the person in breach); 9.1.4 claim the return of the increase of assets due to the breach; 9.1.
Clarion Co., Ltd. All Rights Reserved.Copyright © 2009: Clarion Co., Ltd.
