Installation manual

ManualsBrandsClarion ManualsAutomotiveNP509

Installation manual

Manuel d’installation

Guía de Instalación

*NP509(001-cover)E 1

NP509

QY-5012B

2009/1

Clarion Co., Ltd.

Printed in China / Imprimé en Chine / Impreso en China

Summary of content (11 pages)

PAGE 2
CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic product. We are confident that you’ll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website. The registration form is short and easy to complete.
PAGE 3
Thank you for purchasing the Clarion NP509. English • Please read this manual thoroughly before operating this equipment. • After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). • Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents SPECIFICATIONS ............................................................................................................... 3 INSTALLATION AND WIRE CONNECTION MANUAL...........................
PAGE 4
English INSTALLATION AND WIRE CONNECTION MANUAL Safety Precautions • For your own safety, please read this manual thoroughly before installation and connection. Please be aware of the following precautions: Symbol Identification Notes on the Place to Install to This manual uses various pictorial symbols to show how to use this product safely and to avoid harm to yourself, others and damage to your property. Please ensure you study this manual carefully.
PAGE 5
Safety Precautions Installation Notes WARNING • Please note the position of pipes, tanks and electrical wirings before installing the unit into the vehicle; failure in avoiding these may cause a fire or malfunction. • Whenever using vehicle bolts or nuts for unit installation or grounding, never use the bolts and nuts of the steering system, brake system, tank, or any other critical safety component. Doing so creates the risk of loss of vehicle control, fire, and accident.
PAGE 6
English Package Contents 1 5 1 2 3 4 5 6 3 2 6 7 8 0 9 Main unit (Navigation unit) . . . . . . . . . . . . 1 Power supply cord . . . . . . . . . . . . . . . . . . 1 GPS antenna . . . . . . . . . . . . . . . . . . . . . . . 1 System cable (2.5 m) . . . . . . . . . . . . . . . . . 1 Velcro tape A . . . . . . . . . . . . . . . . . . . . . . . 2 Velcro tape B . . . . . . . . . . . . . . . . . . . . . . . 2 7 8 9 0 ! 4 ! Double-sided tape . . . . . . . . . . . . . . . . . . . 1 Cord holder . . . .
PAGE 7
English Installing the Navigation Unit Note: • Never disassemble the unit by yourself. 1. Attach the Velcro tape. • Affix the Velcro tape A to the bottom of the unit. • Attach the Velcro tape B to the vehicle so it is positioned for mating with the Velcro tape A. Note: • Peel the backing paper from the adhesive side of the Velcro tape before affixing it to the unit or vehicle. 2. Attach the unit. • Secure the unit by joining the pieces of Velcro tapes A and B.
PAGE 8
Installing the GPS Anttenna English 1. Stick the double-sided tape to the bottom face of the GPS antenna. Double-sided tape Bottom face of the GPS antenna 2. Mount the GPS antenna. Stick it surely on a flat plane of the dashboard towards the center of the road where GPS signal interruption is minimized. 3. Wire the GPS antenna cord. Fasten the cord using the cord holders. Stick it on a horizontal place of the dashboard towards the center of the road.
PAGE 9
WARNING Be sure to read the section “Safety Precautions” before installation or connection operations. Example of connecting to the VZ509 White No connection White/black No connection 2 Power supply cord Black Red Ground Connect to a metal part of the vehicle to connect ground. No connection Fuse 3A Yellow Main power supply Connect to the +12V power supply where power source is always supplied.
PAGE 10
Wire Connection English Example of connecting to the optional accessory kit Speaker* White White/black 2 Power supply cord Black Ground Connect to a metal part of the vehicle to connect ground. Red +12V Accessory Fuse 3A Yellow Main power supply Connect to the +12V power supply where power source is always supplied.