User's Manual

13
English
NX602
24-Hourformat
Touch [On] to select 24-Hour format.
Touch [Off] to select 12-Hour format.
Sound
BeatEQ
Touch the button to the right of “Beat EQ” to
show EQ setting menu. You can select : “Bass
Boost”, “Impact”, “Excite”, “Custom” or “Off”.
To adjust the value, touch [-] or [+] button on
the screen.
Touch [Back] to exit.
Balance/Fader
Touch [Set ] to the right of “Balance/Fader” to
show Balance/Fader setting menu.
Touch [ ] or [ ] button to adjust Fader,
and touch [ ] or [ ] button to adjust
Balance.
Touch [Center] to reset the value.
Touch [Back] to exit.
Subwoofercontrol
Touch [-] or [+] button on the right of “Sub
woofer control” to adjust sub woofer level.
Subwooferphase
Touch to select sub woofer phase Normal or
Reverse.
Highpasslter
Touch the button to the right of “High pass
Filter” to show the sub-menu, then select the
lter: “Through”, “55Hz”, “85Hz” or “120Hz”.
Touch [Cancel] to exit.
Lowpasslter
Touch the button to the right of “Low pass
Filter” to show the sub-menu, then select the
lter: “Through”, “62Hz”, “95Hz” or “135Hz”.
Touch [Cancel] to exit.
AMPCancel
Touch [On] to turn off the amplier.
Touch [Off] to turn on the amplier.
MagnaBassEx
Touch [On] to turn on the loudness.
Display
DimmerMode
Touch [Auto], [Day] or [Night] to choose
dimmer mode.
Auto: The dimmer is controlled by your car
light.
Dimmer
Touch [-] or [+] button to the right of “Dimmer”
to adjust dimmer.
The setting is only for Day or Night.
Setup
Touch [Setup] on the right of screen to
spread the setting list. then touch the button
to the right of desired option to adjust or show
the sub-menu. Touch [Close] to close the list.
AUX
• Input Aux Level
Choose “Low”, “Middle“ or “High” input
level of auxiliary device.
Bluetooth
• Bluetooth
Choose Bluetooth function on or off.
• TelephoneSpeaker
Choose Front Left or Front Right speaker
at telephone mode.
• ToneSelect
Touch [Auto] to use ringtones of your
mobile phone.
Touch [Internal] to use preset ringtone of
the unit.
• SoftwareUpdate
Update the software.
Camera
• CameraInterrupt
Choose [On], the screen will switch to rear
camer menu automatically when backing.
DivX
• RegistrationCode
Display DivX Registration Code.