Owner`s manual

12
Technologies
ground signal is removed. This is designed to be
used with cellular phone car kits.
For 2009, Clarion Bluetooth Ready source units
feature a programming option that will, when
enabled, switch the source unit to the auxiliary
input when (-) ground is applied to the brown
wire. This is for use with the BLT370 Bluetooth
Interface.
In-Dash Navigation
Clarion is a world leader in the development of
GPS Navigation systems, manufacturing OEM
systems for the top car manufacturers in the world,
including Porsche, Nissan, Infiniti, Volkswagen,
Ford and more.
For 2009, Clarion offers three multimedia control
stations wth built-in navigation and five navi-
gation ready multimedia control stations. The
NX409 (6.5" double DIN), NX509 (7" double DIN),
and NZ409 (7" single DIN) all feature a built-in
high speed 2GB flash memory navigation sys-
tem. Each system contains over 12 million point
of interest and various map viewing displays. In
addition, text to speech street announcements,
multiple route calculations, and different users
modes. 3D Mapping available in select cites.
Rounding off Clarion's 2009 navigation ready
multimedia control stations are the VX409 (6.5"
double DIN), VX709 (7" double DIN), VZ409 (7"
double DIN), VZ509 (7" single DIN), and VZ709
(7" single DIN). The VX709 and VZ709 are com-
patible with Clarion's already existing hard drive
navigation systems, NAX970HD and NAX980HD
and the new NP509 (black box navigation add-on
system).
The NP509 offers the same navigation benefits
as the NAX970HD/NAX980HD, but without hav-
ing to connect to the vehicle's speed sense
wire. The NP509 can be interfaced directly to
the new VZ509 without any additional hardware.
The VZ709/VX709 can also be interfaced with
the NP509, but will require the CCB509 CeNET
translator.
OEM Remote Ready
With more and more vehicles featuring radio con-
trols integrated in the steering wheel, it is more
important than ever to offer aftermarket source
units capable of interfacing with them. That’s
why Clarion offers a host of multimedia control
stations and CD source units with the capabil-
ity of adding a third party OEM steering wheel
remote interface.
These third party interfaces utilize the key func-
tions found on the steering wheel, such as
volume, mute, seek, track, band, and source
controls. By allowing the driver to control the pri-
mary functions of the source unit from the steer-
ing wheel, it minimizes distractions and removal
of the hand from the steering wheel to adjust the
source unit.
For additional information regarding OEM steer-
ing wheel interfaces, please visit: www.pac-
audio.com, keyword: SWI-JACK & SWI-CAN
OEM Steering Wheel Remote Ready Multimedia
Control Stations:
NX409 NX509 NZ409
VX409 VX709 VZ409
VZ509 VZ709
OEM Steering Wheel Remote Ready CD Source
Units:
CZ109 CZ209 CZ309
CZ509 CX609 DUZ385SAT
OEM Steering Wheel Remote Ready Mechless
Source Units:
FZ409 FZ709
Phone Mute Input
Clarion source units feature a cellular phone mut-
ing circuit, which will attenuate the audio and
pause a CD/DVD during playback while this cir-
cuit is activated.
In its normal function, when a (-) ground signal is
applied to the brown wire in the radio harness,
the radio will mute the audio output until the (-)