Quick Start Guide & Installation manual Guide de d’emarrage et Guide d’installation Guía de inicio rápido y Manual de instalación NZ502 Multimedia Station With Built-in Navigation & 7” Touch Panel Control Station multimédia avec navigation intégrée et commande par écran tactile de 7 pouces Estación multimedia con navegación integrada y control de panel táctil de 7 pulgadas
English NX602 NZ502 1 1
Contents English PRECAUTIONS.........................................................................................................4 1. OPERATIONAL PANEL........................................................................................6 NZ502 Functions of Buttons..................................................................................6 2. TURNING THE POWER ON.................................................................................8 3. MAIN MENU OPERATIONS..........................
English English 18. SETTING OPERATIONS...................................................................................27 General Setup Menu............................................................................................27 Video Setup Menu...............................................................................................27 Audio Setup Menu...............................................................................................28 Navigation Setup Menu........................
English PRECAUTIONS WARNING For your safety, the driver should not operate the controls while driving. Also, while driving, keep the volume to a level at which external sounds can be heard. 1. When the interior of the car is extremely cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc , wipe it off with a soft cloth.
English English INFORMATION FOR USERS: Changes or modifications to this product unapproved by the manufacturer will viod the warranty and will violate FCC approval.
English 1. OPERATIONAL PANEL NZ502 Functions of Buttons [microSD] [ISR/SEND] [BND/END PS] [OPEN] [NAVI/AV] [ ] [MIC] [RESET] [AUX 1 JACK] [ / ] [VOL-] [ [VOL+] [IR] ] ] [ [MENU/POWER] Note: Be sure to read this chapter while referring to front diagram “PANEL CONTROLS”. [RESET] Button • Press this button to hardware reset the unit. [NAVI/AV] Button • Press this button to enter navigation mode; press again to return current source.
[OPEN] Button • Press this button to open/close TFT panel. • Press and hold to enter TFT panel angle setting options. [MENU/POWER] button • Press this key to power on the system in power off mode. • Keep pressing this key more than 2 second to turn off the system when system is in power on mode. • Press this button to display main menu, press again to return current source when system is in power on mode. [BND/END PS] Button BND Function: • Press this button to enter AM/FM tuner mode from any source.
English 2. TURNING THE POWER ON Start the engine. The power is supplied to this unit. Press [MENU/POWER] button on the panel to turn on the unit. Selecting a Source Press [MENU/POWER] button on the PANEL to show main source menu. Change page by dragging left or right or touching other buttons. Touch the icons on the screen to enter corresponding work mode, such as Disc mode, Tuner mode, Telephone mode, etc.
English English 3. MAIN MENU OPERATIONS Front Zone Source [Tuner]-Press the button to display the Tuner mode. [Disc Audio]-Press the button to display the Disc Audio mode. [SiriusXM]-Press the button to display the SiriusXM mode. [USB Audio]-Press the button to display the USB Audio mode. [Pandora]- Press the button to display the Pandora mode. [iPod Audio]-Press the button to display the iPod Audio mode. [Navigation]-Press the button to display the Navigation mode.
English 4. DVD VIDEO PLAYER OPERATIONS DVD Player mode screen Search with a Chapter/Title Number After disc is loaded, the play mode is automatically engaged. Touch any place of the screen to display DVD Video menu touch the screen again to return playback screen.
Play disc video files English English This system can play video files (AVI/MP4,etc) stored on disc. Touch the screen of the playing video file to display Video files player menu touch the screen again to return the playback screen.
English 5. DVD AUDIO PLAYER OPERATIONS MP3/WMA /CD Playback 7 6 5 8 9 10 11 12 1 2 3 4 16 13 17 18 14 15 19 9- Repeatplayback 10- Play/Pause 11- Random play 12- Next Track Fast Forward (long press) 13- Display Direct Searching menu 14- Scan play 15- Rotation Effect On/Off 16 - Song Title 17 - Artist Information 18- Album Information 19- Close option menu 20- Repeat Playback button can While playing MP3/WMA touch switch between Repeat Folder, Repeat All and Repeat Track.
9 8 10 7 11 12 6 13 1 2 3 4 5 14 15 English Connect your USB memory with MP3/WMA files to the USB connector. The system will automatically detect the connected device, and the [USB Audio] button on main menu will be enabled. English 6.
English 7. USB VIDEO MODE OPERATIONS Connect your USB memory with video files to the USB connector. The system will automatically detect the connected device, and the [USB Video] button on main menu will be enabled.
English English 8. iPod AUDIO MODE OPERATIONS iPod audio settings mode screen Connect your iPod®/iPhone® to the USB connector. The system will automatically detect the connected device and the iPod Audio button will be enabled for operation on the Main Menu screen.
English 9. iPod VIDEO MODE OPERATIONS Connect your iPod/iPhone to the USB connector. The system will automatically detect the connected device and the iPod Video button will be enabled for operation on the Main Menu screen. 1 2 3. Play/Pause 4. Repeat playback 5. Next Track Fast Forward (long press) 6. Video title 7. Next Page / Previous Page 8. Category List 9. Bluetooth Status 10.System Time display 11. Playback Status 12. Art Work 13.
iPod Simple Control Mode English English If the Simple Control is set to On. The screen will become Simple Control Mode. It can also display the video of iPod /iPhone regardless it is iPod Audio or iPod Video mode. But only “Previous Track” “Play/ Pause” and“Next Track” can be operated. 5 1 2 4 3 6 7 8 9 10 1- Previous Track 2- Display the video of iPod /iPhone.
English 10. Bluetooth MODE OPERATIONS Pairing Bluetooth Telephone menu You can register up to 3 cellular phones. 1. Turn on Bluetooth function of your mobile phone. 2. Touch Bluetooth Audio or Telephone icon on main menu. 3. Touch the Device key [ ] to display the Device Select screen. 4. Touch the [ ] key to display the Inquiring Device screen. 5. Touch your desired Cellular key to select the key for the cellular phone to be registered, and press [ ] button to register for the Bluetooth audio player. 6.
Bluetooth Audio mode English 1 English 3. Touch the [ ] key to call the specified number. The Telephone Interrupt screen is displayed, and calling starts. • When the call is finished, touch the [ ]key to hang up. 2 •Making a call using the History The system will memorize the Dialed/Received calls record data in the memory. You can confirm it and use it to make a call from this unit. 1. Touch the [ ] key. The History List screen is displayed. • The items are sorted by Dialed, Missed and Received calls.
English 11. Pandora MODE OPERATIONS Setting screen 1. Turn on Pandora function of your iPod. 2. Connect your iPod to the unit. 3. When iPod/iPhone is already connected, touch the [Pandora]icon on the Main Menu screen. 1 2 ID 3 Information Screen 8 3 9 10 1 11 12 2 13 3 4 5 6 7 1- Art Work 2- Progress bar 3- Display setting screen 4- Thumbs-down 5- Next track 6- Play/Pause 7- Thumbs-up 8- System time 9- Show List Screen 10- Current station name 11- Current title.
6 English Direct mode English 12.
English 13.HD Radio™ RECEIVER OPERATIONS HD Radio Sub channel Function This function is available when an HD Radio tuner is connected. Listening to HD Radio Touch the Tuner button on the Main menu display. The HD Radio mode screen will be displayed. 7 12 8 9 5 10 If the [ ] key is enabled, please touch the [ ] key to tune to next available sub channel. Note: Not all stations have HD Radio sub channel broadcasts.
4 English Direct mode English 14.
English 15. AUX 1 / AUX 2 OPERATIONS External peripheral devices, including a game console, camcorder, iPod/iPhone, etc. can be connected to the AUX 1 or AUX 2 connector on the front or back of this unit using the A/V media cables. Switching to AUX IN / AV IN mode • Press [AUX 1] or [AUX 2] button on Main Menu to select desired mode (when unit is connected). If the external device connected to AUX 1or AUX 2 input have audio signal, the unit will broadcast audio of external device.
English If a monitor is installed in the rear zone and connected to the rear zone AV output, passengers in the back seat can control the DVD output using the rear zone remote control. English 17. REAR SOURCE OPERATIONS AUX 1 in Rear NOTE: 1.If the source is selected as the front, the source in rear can’t be selected. 2.If the source is selected as the rear, the source in front can’t be selected.
iPod Video Rear Source ID3 Mode English Same as iPod function of front source 26 NZ502
English English 18. SETTING OPERATIONS Press [ ] button on the Main menu screen. The Setting menu screen will be displayed. General Setup Menu Input Aux Sense: Auxin input switch, including Low, Mid, High. Dimmer Mode: Select screen dimmer mode. There are three options, Day, Night and Auto. Tel Speaker: There are two options, Left and Right. For example, if current setting is Left, when BT phone is coming in, only left speaker can hear the phone. PANDORA: Set PANDORA On or Off.
Audio Setup Menu English small turn info window will pop up in the top of the AV screen to indicate the key point. “Off”: Turn off this function. Voice Guidance: Enable or disable the navigation voice guidance. Voice Guidance Mix: There are two choose: On/Off. “On”: The navigation voice guidance will play at the same time and the voice of the current source. “Off”: Only the navigation voice guidance.
NZ502 29 English 1. If your unit is unlocked, hold the [ ] button more then 2 seconds, then the Anti-Theft setting mode will display. Users can change anti-theft code. Click [Yes], the numerical keypad is displayed. Enter the new password twice, then anti-theft code is set and your unit is secured. When the Anti-theft is “On”, you need enter correct Anti-theft code to turn the unit on. If you enter wrong code three times, the unit is locked, and must be unlocked by the professionals. 2.
English 19. Start using Clarion Mobile Map When Clarion Mobile Map is started the first time,you need to do the following: 1. Select the written language of the application interface .Later you can change it in Setting. 2. Select the language and speaker used for voicd guidance massages. Later you can change it in Settings. 3. Read and accept the End User Licence Agreement. 4. Readf and accept the road safety waming. After this,the Navigation menu appears and you can start using Clarion Mobile Map.
Map Screen 15 English 16 English 12. To enlarge this small map and open the map screen,tap[Show Map]button 13. Zooming in and out 14. Titting up and down 15. Rotating left and right 16. 2D or 3D view 13 17. Compass in 2D map view mode 18. Compass in 3D map view mode 19.Location information 20. Retum to normal navigation 21. Select destination 19 14 20 11 21 Quick Menu 22.The Quick menu is a selection of controls and functions that are frequently neened during navigation.
English INSTALLATION / WIRE CONNECTION GUIDE Before Starting 1. This set is exclusively for use in cars with a negative ground 12 V power supply. 2. Read these instructions carefully. 3. Be sure to disconnect the battery “-” terminal before starting. This is to prevent short circuits during installation. (Figure 1) Car battery Figure 1 Package Contents Main unit.................................................... 1 Warranty Card........................................... 1 Wiring harness................
Cautions on Installation English English 1. Prepare all articles necessary for installing the source unit before starting. 3. Install the unit within 30° of the horizontal plane. (Figure 3) 2. This model features an operation panel that slides forward. On some types of cars, the operation panel may make contact with the dashboard or gearshift lever, in which cause it cannot be installed.
Installation Guide English Installtion The GPS Antenna English Installing The GPS Antenna WARNING • • Do not install the GPS antenna in a place where it may interfere with the operation of the airbag or hinder the driver’s visual range. Do not use the navigation system with the GPS antenna cord cut off. The power cables in the cord may be short-circuited. Note: • The supplied GPS antenna is for installing inside the vehicle. Do not install it outside the vehicle.
Note: • Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details. • Fasten the front stopper securely to prevent the main unit from coming loose. 1. Place the universal mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the universal mounting bracket inward, then secure the stopper as shown in Figure 6. 2. Wire as shown in Section 7 (see page 37). 3.
English Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles) This unit is designed for fixed installation in the dashboard. If the vehicle is equipped with a factory-installed radio, install the main unit with the parts and screws marked (*2). (Figure 7) If the vehicle is not equipped with a factoryinstalled radio, obtain an installation kit to install the main unit in the following procedure. 1. Remove the screws from both side of the main unit.
English English Cautions on Wiring 1. Be sure to turn the power off before wiring. 2. Be particularly careful where you route the wires. Keep them well away from the engine, and exhaust pipe, etc. Heat may damage the wires. 3. If the fuse should blow, check to see if the wiring is correct. If a fuse is blown, replace it with a new one of the same amperage rating as the original (15A FUSE). 4. To replace the fuse, remove the old fuse on the back of the unit and insert the new one.
Wire Connections the optional devices, the RCA cables and the Connector cables are separately-sold items. • InNZ501 HD Radio™ Tuner (THD400) Owner’s Manual GPS Antenna English HD Radio English English Note: • Before installing, be sure to disconnect the negative cable of the car battery.
English English English Owner’s Manual Yellow Black Purple Purple/Black Red +12V main power Ground Rear right + Rear right +12V accessory Gray Front right + Gray/Black White White/Black Green Green/Black Blue/White Front right Front left + Front left Rear left + Rear left Amplifier turn-on cord Orange/White Illumination Blue Auto antenna Brown Phone interrupt (*1) Grass-green Purple/White Parking brake cord Reverse gear cord Note: *1: Connecting the PHONE INTERRUPT terminal The phone interr
English Connecting the parking brake cord Connect the cord to parking brake lamp ground in the meter panel. Note: • Connecting the parking brake cord to lamp ground allows you to watch iPod/iPhone video/DVD video/AV input when the parking brake is engaged. • When the parking brake cord is not connected, the monitor will not show any video sources.
Clarion Co., Ltd. All Rights Reserved. Copyright © 2012: Clarion Co., Ltd.