Operation Manual

40 NZ502E
English
English
Owner’s Manual
English
Owner’s Manual
15. RADIO OPERATIONS
Listening to the Radio
1. Touch the [Tuner]buttonontheMainmenudisplay.
The tuner mode screen is displayed.
2.Pressthe[FM1/2/3/AM] button or touch the [Band]
key on remote control to select the radio band. Each
time the button is pressed, the radio reception band
changes in the following order:
FM1->FM2->FM3->AM->FM1...
1 32
8
9
4
6
5
11
7
10
1.PresetScanButton
2.DirectButton
3.PresetListButton
4.FrequenciesDisplay
5.TuneUp
6. Tune Down
7.BandDisplay
8.LOC/DXDisplay
9.BluetoothDisplay
10.RDSStationDisplay
11.Systemtime
Seek Tuning
1.Pressthe[FM1/2/3/AM] button to select the radio
band(FMorAM).
2. Touch the [
]key,andthenicktheBIG
Frequencyupanddowntosearchfornextavailable
station.
• Whenickthefrequencyup,thestationissearched
inthedirectionofhigherfrequency.
• Whenickthefrequencydown,thestationis
searchedinthedirectionoflowerfrequency.
Step Tuning
1.Pressthe[FM1/2/3/AM] button to select the radio
band(FMorAM).
2. Touch the [
] or [ ]keyinfrequencypaneltotune
up or down by one step.
Recalling a preset station
1.Pressthe[FM1/2/3/AM]buttontoselectthedesire
band(FMorAM)onthetuner.
2. Touch the [
]key,Pressthepresetstation
(1to6)onpresetlist.
3.Pressthe[
] key, then press the [ ] button to
auto search and store the stations.
Manual memory
1.TouchthedesiredBandkeytoselectthebandyou
wish to store.
2. Tune to a station you want to store using the seek
tuning, step tuning, or preset tuning.
3.TouchandholdthedesiredPresetkeyyouwantto
store for about 3 seconds.
Auto Store
TheAutoStoreisafunctionforstoringupto6stations
thatareautomaticallysearchedinsequentially.Ifthe
number of receivable stations cannot reach to 6, the
previous stored station remains.
1. Touch the [FM1/2/3/AM] key to select the desired
band.(FMorAM)
2.Pressthe[
] key, and then press the [ ] key to
starttheAutoStore.
Abeepsoundsandthestationswithgoodreception
are stored automatically to the preset list.