Operation Manual

58 NZ502E
English
English
Owner’s Manual
English
Owner’s Manual
Universal Mount
1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting
bracketinward, then secure the stopper as
showninFigure 6.
2. Insert the main unit into the universal
mounting bracket until it locks.
3. Mount the outer escutcheon so that all the
hooks are locked.
Note:
• Some carmodelsrequire specialmountingkitsfor
proper installation.Consult your Clariondealerfor
details.
• Fasten thefront stoppersecurely to prevent the
main unit from comingloose.
• Console opening dimensions
Hole
7-3/16" (182 mm)
2-1/16"(53 mm)
Hole
Hexagonal
bolt
Instrument panel
Stoppers
Screwdriver
Universal mounting bracket
Stoppers
2-Spring
Main Unit
Outer escutcheon
Note:
Set theouter escutcheon
so that itsmetallicparton
thebacksidefitsthe upper
edge of themainunit.
Figure 5
5. Installing The Main Unit