Operation Manual

60 NZ502E

English

Owner’s Manual

English

Owner’s Manual

6. Cautions on Wiring

1.Besuretoturnthepoweroffbeforewiring.

2.Beparticularlycarefulwhereyouroutethewires.

 Keepthemwellawayfromtheengine,andexhaustpipe,etc.Heatmaydamagethewires.

3. If the fuse should blow, check to see if the wiring is correct.

 Ifafuseisblown,replaceitwithanewoneofthesameamperageratingastheoriginal(15AFUSE).

4.Toreplacethefuse,removetheoldfuseonthebackoftheunitandinsertthenewone.(Figure8)

NOTE:

There are various types of fuse holder. Do not let the battery side touch other metal parts.

Figure 8

Fuse(15AFUSE)

After the connection, ﬁx the cord by a clamp

or insulation tape for protection.

Fuse holder

CAUTION