User's Manual

Operations Common to Each Mode
English
23CX501
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “SCROLL”.
3-1. Turn the [ROTARY] knob to select “ON”
or “OFF”.
Turning the screen saver function on
or off
This unit is provided with the screen saver
function which allows you to show various kinds
of patterns and characters in the operation
status indication area of the display in a random
order. You can turn on or off this function. If the
button operation is performed with the screen
saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “ON”.
2-1. Select “SCRN SVR”.
3-1. Turn the [ROTARY] knob to select the
setting.
Each time you turn the [ROTARY] knob,
the setting changes in the following order:
“ON”
“OFF”
To scroll just 1 time.
∗ When you want to see the title again, in the
title mode, press and hold the [DISP] button
(3 sec.) to scroll the title.
Setting the dimmer control
You can set the dimmer control “ON” or “OFF
”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
3-1. Turn the [ROTARY] knob to select “ON”
or “OFF”.
Anti-theft indicator
The red Anti-theft indicator is a function for
prevent theft. When the ACC or POWER is off,
this indicator blinks.
∗ The factory default setting is “OFF”.
2-1. Select “BLINKLED”.
3-1. Turn the [ROTARY] knob to select “ON”
Selecting Rear or Subwoofer
The factory default setting is “REAR”.
2-1. Select “REAR/S-W”.
3-1. Turn the [ROTARY] knob to select
“REAR” or “S-WOOFER”.
Performing a reset
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select “RESET ”.
3-1. Press and hold the [ROTARY] knob
(1 sec.).
“RESET” appears in the display,
then the unit returns to the previous
operation mode.
r ON:
To scroll automatically.
r OFF:
AUX function
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
unit.
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗ The factory default setting is “MID”.
1. Press and hold the [DISP] button (1 sec.).
2. Select “AUX SENS”.
3. Turn the [ROTARY] knob to select
“HIGH”, “MID”or“LOW”.
Note:
r When AUX mode is selected, AUX IN sensitivity
can be set.
r
When the ENTER PERSONAL
CODE screen appears
The ENTER PERSONAL CODE screen will be
displayed when turning the ACC power on after
performing the following operations:
r The car battery was replaced.
r The backup power was cut off.
r The [RESET] button was pressed.
Note:
r If you have lost your Personal Code, please
contact Clarion customer service.
1. Enter your Personal Code currently set.
2. When the correct Personal Code is entered,
the unit will restart from the initial startup
screen.
Notes:
r When you enter a wrong Personal Code, the
message “LOCK - - - -” is displayed and the
Personal Code entry is prohibited for a while.
This prohibited time is changed according to the
number of times of wrong code entry as follows:
r 1 to 6 times: 15 seconds
r 7 times or more: 15 minutes