User's Manual

SUBARU Standard model Operation 100126.doc
- 39 / 183 -
5-4-6. SEEK UP / DOWN
Function RADIO SEEK UP/DOWN
Operation
of button
Touch the >> and << key (Action when Key is ON.)
Destination North America Europe Australia
Detail Latency time for seeking FM is 6msec, and AM is 30 msec.
Long touch the RDS key to switch LO/DX SEEK sensitivity in Europe.
In Australia ensitivity of seeking AM is linked to the illumination, Sensitivity of seeking FM is fixed to DX. (It will be LO
SEEK when the illumination is ON, and be DX SEEK when the illumination is OFF )
It will be MUTE while seeking.
If the frequency reaches the maximum when you are seeking up, it will go back to the minimum frequency and go on
seeking up.
If the frequency reaches the minimum when you are seeking down, it will go back to the maximum frequency and go on
seeking down.
When it goes back to the maximum/minimum frequency, it will keep the next frequency for 500msec then go on seeking.
The last frequency will be updated by seeking when it detected a possible station and stop seeking.
It will also stop at other station besides RDS stations, even RDS is ON.
It will stop only at TI (Traffic information Broadcasters) Station when TI interrupt is ON.
SEEK mode will be released by following conditions.
When received a station which is possible to be received.
When you go to other source mode. (The last frequency is the frequency before seeking.)
When you switch to other band. (The last frequency is the frequency before seeking)
When you turn ACC / POWER OFF. (The last frequency is the frequency before seeking)
When you turn the TUNE key. (Stop at the frequency when key is ON)
When you touch the >> or << key. (Stop at the frequency when key is ON)
When you touch the 1 6 key. Call the cahannel you touch when key is ON)
Touch the SCAN / AS key for less than 1.5sec. (Start to scan from CH1 of current Band)
Touch the SCAN / AS key for more than 1.5sec. Start AS from current frequency)