User's Manual

SUBARU Standard model Operation 100126.doc
- 42 / 183 -
５-４-９． PRESET SCAN
Function RADIO Preset SCAN UP
Operation
of button
Touch the SCAN / AS key for more than 1.5sec.
Destination North America ・ Europe ・ Australia
Detail
If you touch the SCAN / AS key in RADIO Mode for less than 1.5sec, it will start preset scan.
It will scan up the frequency of the preset channel memory.
It will start to preset CH1 if it receives the other channels.
It will start to scan from the next channel when it is receiving the preset channel when Preset Scan starts.
I twill not scan the beginning channel when it is receiving the preset channel when Preset Scan starts.
（For Example ： If it Preset Scan starts when receiving CH2, it will scan like the following. CH3 ⇒ 4 ⇒ 5 ⇒ 6 ⇒
1. It will release Preset Scan after CH1 and return to receive CH2.）
Preset Scan will scan around for once in a Band and end.
If it finds a station which is possible to receive, it will wait for 0.5sec and release the mute mode, then starts to receive
the channel for 10sec.
It will go to next preset channel after 10sec.
If the frequency of the preset channel is impossible to receive, it will skip.
The frequency of preset channel will not be the last frequency even it is possible to receive.
In TI/NEWS interruption mode, it will receive the frequency of station which is possible to receive, regardless of that it is
Transportation information Bureau/ NEWS station or not.
It will go on scaning even there is TI/NEWS interruption.
It will go on scaning in background when it is interrupted by a call.
The Channel Number will blink in preset scan mode.
Preset scan begins when seeking, and returns to the frequency before preset scan starts if there is no station possible
to receive. (The last frequency is not the frequency before seeking but scaning.)
SCAN mode will be released by following conditions.
When you go to other sourcemode. （The last frequency is the frequency before scan.）
When you switch to other band. （The last frequency is the frequency before scan.）
when you turn ACC / POWER OFF. （The last frequency is the frequency before scan.）
When you turn the TUNE key. （Stop at the current preset CH when key is ON.）
When you touch the >> or << key. （Stop at the current preset CH when key is ON.）
When you touch the 1 ～ 6 key. （Call the cahannel you touch when key is ON）
When you touch the SCAN / AS key. （Stop at the current preset CH when key is ON.）