User's Manual

SUBARU Standard model Operation 100126.doc
- 43 / 183 -
５-４-１０． AUTO STORE
Function RADIO Frequency Auto Preset Memory
Operation
of button
Touch the SCAN / AS key for more than 1.5sec.
Destination North America ・ Europe ・ Australia
Detail
I f you touch the SCAN / AS key in RADIO Mode for more than 1.5sec, it will start Auto Store.
It comes out “BEEP”, when it starts Auto Store.
All bands can be Auto Stored in FM.
AS will start to seek up from the next frequency.
Destination for Europe is that it will seek up around for LO sensitivity, if therer are nothing to preset “1-6” memory, it
will seek up around again for DX sensitivity.
Destination for Australia is that seeking sensitivity (LO/DX) will be linked to the illumination in AM mode, and DX
sensitivity in FM mode.(the same to SEEK).
If the memory of the “1-6” key has been preseted, it will be ended even it has not finished seeking for 2 circles.
If the frequency/PI stationis the same to that in the preset memory, it will not preset again..
It will display the preset Number which will be preseted.
When a station which is possible to receive, it will keep the frequency as memory. (Keep the memory even it is released.)
If there are channels which cannot be preseted even it has saugh for 2 circles, the memory will be the frequency before
Auto Store starts.
It will start to receive CH1 after Aoto Store released even if there is only one station preseted.
If there is no station preseted after Auto Store ends, it will start to receive the frequency of that when Auto Store
starts.
It will go on Auto Storeing in background when there a call interrupts in AS Mode.
If TI interruption is ON, it will preset Transportation information Bureau only.
AS mode will be released by following conditions.
When you go to other sourcemode. （The last frequency is the beginning frequency.※1）
When you switch to other band. （The last frequency is the beginning frequency.※1）
When you turn ACC / POWER OFF. （The last frequency is the beginning frequency.※1）
When you turn the TUNE key. （Stop at the frequency when key is ON）
When you touch the >> or << key. （Stop at the frequency when key is ON）
When you touch the 1 ～ 6 key. （Call the cahannel you touch when key is ON.）
When you touch the SCAN / AS key. （Receive the frequency before AS started when key is ON.）
※1 I t will start to receive CH1 even if there is only one station preseted.