User's Manual

SUBARU Standard model Operation 100126.doc
- 95 / 183 -
５-８-１２． SCAN
Function CD Scan Mode
Operation
of button
Touch the SCAN key （Action when Key is ON）
Destination North America ・ Europe ・ Australia
Detail
■ When playing CD-DA
It will switch to next scan mode like following if you touch the SCAN key each time.
It will play each track in the disk for 10sec in scan mode.
It will go to the first track and keep the scan mode when it finishes playing the last track in the disk in scan mode.
SCAN
OFF
→
DISC
SCAN
→
SCAN
OFF
■ When playing DISC MP3/WMA/AAC
It will switch to next scan mode like following if you touch the SCAN key each time.
It will start to play each track in the folder for 10sec from the next track when you switch to FOLDER SCAN Mode.
It will go to the first track and keep the scan mode when it finishes playing the last track in the folder in FOLDER SCAN
Mode.
SCAN
OFF
→
FOLDER
SCAN
→
SCAN
OFF
Initial setting is OFF.
It will display the SCAN Mode name for 3sec, then display P-TIME if you switch to scan mode.
It will scan from the next track to the track when you operate the folder.
It will scan around once in the DISK/FOLDER, and stop when it goes to the track before scan starts.
SCAN Mode will be released by following operations.
Turn ACC/POWER OFF.
Switch to other source mode.
Turn the TUNE key. （TRACK UP/DOWN）
Touch the >> or << keyfor more than 0.5sec. （FF/FB）
Touch the UP or DOWN key. （Only DISC MP3/WMA/AAC ： FOLDER UP/DOWN）
Touch RPT / RDM key for less than 0.5sec. （RPT Mode ON）
Touch the RPT / RDM key for more than 0.5sec. （RDM Mode ON）
Touch the SCAN key. （SCAN Mode relleased when Key is ON）