User Manual.
User Manual.doc １． １． Table of Contents Table of Contents ................................................................................................................................................................................................................................................................... 2 ２． OUTLINE....................................................................................................................................................................................
User Manual.doc ５-４-１０． Advisory Message List ..............................................................................................................................................................................................................................40 ５-５． Operation of Satellite Radio （Sirius） ......................................................................................................................................................................................................
User Manual.doc ５-８-１４． ５-８-１５． ５-８-１６． ５-８-１７． ５-８-１８． ５-８-１９． ５-８-２０． ５-８-２１． ５-８-２２． RPT/RDM Playlist of Track Transition.............................................................................................................................................................................................93 SCAN ..............................................................................................................................................................................................
User Manual.doc ２． OUTLINE ２-１． Outline Car Model Set Destination Note 2DIN size 1CD player EX7 PF-3380 North America （U） Left Handl Drive Car ２-２． ・ ・ ・ Destination / Model Set Name Warning ( North America (U) model ) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment..
User Manual.
User Manual.doc ３． Feature List Mode Radio Function AM（MW）Frequency Band（kHz） FM Frequency band（MHｚ） Number of Preset AM Station Number of Preset FM Station MANUAL UP/DOWN SEEK UP/DOWN AUTO STORE Existence Station SCAN UP Switch to LO/DX PS Selection PTY PTY SEEK RADIO TEXT Destination 530～1710 87.75～107.
User Manual.doc TRACK REPEAT FOLDER REPEAT ALL RANDOM FOLDER RANDOM FOLDER SCAN DISPLAY FOLDER/FILE NAME PLAYBACK COMPRESSED AUDIO PLAYBACK iPod ○ ○ ○ ○ ○ ○ ○ ○ HFP OPP A2DP AVRCP（Ver.1.
User Manual.doc ４． ４-１． Key Disposition Body A E B F C G I J K L D H M Q O P R N S T U V Destination W X Key Name 記号 A B C D E F G H I J K L M N O P Q R S T U V W X EJECT PTY / CAT A.S.
User Manual.
User Manual.doc ５． Operation Specification ５-１． Audio Common Operation ５-１-１． Function Operation of button VOLUME UP / DOWN VOLUME UP / DOWN Turn left/right the VOLUME key There are 41 steps in VOLUME STEP from Step0 to Step40. The set will keep the volume value for each of connection AUX and other modes.(such as RADIO,CD mode) Initial volume value is 15. Initial volume value of AUX mode is 15. If you turn right the VOLUME key, the volume value will be 1 step up.
User Manual.doc ５-１-２． Function Operation of button Switch to TONE / BALANCE Adjustment Mode Switch to TONE / BALANCE Adjustment Mode （BASS / MIDDLE / TREBLE / FADER / BALANCE） Touch the TUNE key for less than 1.5sec. (Operation when Key is OFF) If you touch the TUNE key for less than 1.5sec, it will switch to TONE / BALANCE adjustment mode. It will go to next mode like following, when you touch the TUNE key.
User Manual.doc ５-１-３． Function Operation of button Adujust TONE / BALANCE UP / DOWN Adujust TONE / BALANCE UP / DOWN （BASS / MIDDLE / TREBLE / FADER / BALANCE） Turn left/right the TUNE key If you turn the TUNE key in T/B adjustment mode, the T/B adjutment value will be up/down. When the adjustment value becomes 0 (CENTER) by your operation, the value will be hold on for 500msec.
User Manual.doc ５-２． ５-２-１． Function Operation of button Operation of MENU Switch to MENU Mode Call / Switch to MENU Mode Touch the MENU key. （Action when Key is ON.） It will go to next mode like following, when you touch the MENU key. Initial setting is “OFF”. OFF Detail → BT Audio → SVC → SRS Sound → BEEP MENU mode will be released by following conditions. No operation is done in 5 seconds after you switch to next menu mode. When you turn ACC / POWER off.
User Manual.doc ５-２-２． Function BT Audio Setting Bluetooth Audio Setting PAIR AUDIO ： Pair to a mobile phone which has A2Dpprofile. SELECT AUDIO ： Select a mobile phone from registration list. SET PASSKEY ： Set passkey for pairing. DELETE AUDIO ： Delete a mobile phone from registration list. ※ BT Audio setting is not effective when driving. ※ Touch “GO BACK” on the top of each item to release menu mode and go back to the last source. PAIR AUDIO 1.
User Manual.doc SET PASSKEY 1. Select “SET PASSKEY” Key Operation ： Turn the TUNE key when in BT Audio Setup MENU, select “SET PASSKEY” and touch. 2. Set PASSKEY It will display the current passkey（PKY：XXXXXXXX）, then display new PASSKEY INPUT TEXT. ※ 4-8 digits number is available. ※ If you set new passkey in BT Audio, the passkey of HF set is also changed. The same is true in reverse. ※ Initial passkey is “1234”. Key Operation ： Turn the TUNE key when displaying “BT Audio”, input numbers and touch. 3.
User Manual.doc ５-２-３． Function Operation of button Adjust SPEED VOLUME CONTROL (SVC) Adjust SPEED VOLUME CONTROL (SVC) in Menu Mode Turn the TUNE key Turn the TUNE key while adjusting SVC in MENU Mode to adjust SVC Initial setting is OFF. The adjustment value will not be changed if you turn up when it is the MAX value, or turn down when it is the MIN value. Adjustment range is the following.
User Manual.doc ５-２-４． Function Operation of button Detail Adjust SRS Sound Switch SRS Sound ON/OFF in MENU Mode Turn the TUNE key while adjusting SRS Sound. Turn the TUNE key while adjusting SRS Sound to switch SRS Sound ON/OFF. Initial setting is OFF. The adjustment value will not be changed if you turn up when it is ON, or turn down when it is OFF.
User Manual.doc ５-２-５． Function Operation of button Detail Adjust BEEP Switch BEEP ON/OFF in MENU Mode Turn the TUNE key while adjusting BEEP. Turn the TUNE key while adjusting BEEP to switch BEEP ON/OFF. Initial setting is ON. The adjustment value will not be changed if you turn up when it is ON, or turn down when it is OFF.
User Manual.doc ５-３． ５-３-１． Function Operation of button Operation of RADIO （RBDS） Initial Setting of RADIO Initial Setting of RADIO Frequency / Preset CHANNEL － ■RADIO Setting BAND FM AM 87.75 ～ 107.9 MHz 200 kHz 200 kHz 3 BAND FM1 98.1 MHz FM2 87.7 MHz FM3 87.7 MHz 530 ～ 1710 kHz 10 kHz 10 kHz 2 BAND AM1 1000 kHz AM2 530kHz - Item Frequency Range Receiving Step SEEKStep Band Initial Value of Band/ Frequency ※ 87.75 will be display as 87.7. ※ Preset Number will not be displayed initial.
User Manual.doc ５-３-２． Function Operation of button Call / Switch RADIO Mode Call FM/AM RADIO Mode and Switch to BAND Touch the FM or AM key If you touch FM or AM key in other source mode, it will start toreceive Frequency of last Band and last memory. It is also effective when POWER OFF. (( ST )) indicator will blink while receiving Stereo Broadcast in FM mode. If you touch the FM key in FM mode, it will switch to next Band like following.
User Manual.doc ５-３-３． Function Operation of button TUNE UP / DOWN RADIO TUNE UP/DOWN Turn the TUNE key If you turn right the TUNE key in radio mode, the receiving frequency will be 1 step up. Detail If you turn left the TUNE key in radio mode, the receiving frequency will be 1 step down. If you turn up when frequency is the maximum, it will go to the minimum frequency. If you turn down when frequency is the minimum, it will go to the maximum frequency.
User Manual.doc ５-３-４． Function Operation of button SEEK UP / DOWN RADIO SEEK UP/DOWN Touch the >> & << key （Action when Key is ON.） If you touch the >> or << key in RADIO mode, the receiving frequency will seek up or down. It will be MUTE while seeking. If the frequency reaches the maximum when you are seeking up, it will go back to the minimum frequency and go on seeking up. If the frequency reaches the minimum when you are seeking down, it will go back to the maximum frequency and go on seeking down.
User Manual.doc ５-３-５． Function Operation of button Call PRESET Call RADIO Preset Channel Touch the 1 ～ 6 key for less than 1.5sec. If you touch the 1 ～ 6 key for less than 1.5sec in RADIO mode, it will call the frequency which is kept as the memory of the key. It will switch the channel number display when key is ON. It will switch the frequency display when key is OFF. It is available to receive the frequency of preset channel when key is OFF.
User Manual.doc ５-３-６． Function Operation of button Write PRESET Preset Memori of RADIO frequency Touch the 1 ～ 6 key for more than 1.5sec. Touch the 1 ～ 6 key in RADIO mode for more than 1.5sec, it will preset the frequency as the memory of the key you touched. BEEP sounds when memory is confirmed. The displaying CH number will blink once when memory is confirmed. It will not work when you touch the key which the preset memory has been received. Detail The following keys are effective before key OFF.
User Manual.doc ５-３-７． Function Operation of button SCAN RADIO Station SCAN UP Touch SCAN key If you touch the SCAN key in RADIO mode, it will start to scan radio station which is possible to receive. It will start to scan radio stations, which is possible to receive, from the next frequency. It will be mute while scaning, if there is no station which is possible to receive. Mute mode will be off and radio sound comes out, when radio station, which is possible to receive, is found.
User Manual.doc ５-３-８． Function Select / SEEK PTY Select / Seek RADIO PTY Group Touch the PTY / CAT key Operation of button （PTY selection mode ON） Touch the FOLDER UP or FOLDER DOWN key Touch the >> or << key （PTY UP/DOWN） （PTY SEEK） ■PTY Group Selection Mode If you touch the PTY / CAT key in FM mode, it will go to PTY Group Selection Mode and display the PTYgroup being selected for 10 seconds. It will display 「PTY」 in PTY Group Selection Mode.
User Manual.
User Manual.doc ５-３-８-２． PTY GROUP List No GROUP NAME PTY Code of Objiect 1 2 3 4 5 6 7 8 9 10 11 12 13 ALL PTY INFO ROCK SOFT TOP 40 COUNTRY OLDIES JAZZ CLASSICAL R&B RELIGIOUS MISC WEATHER 0～30 1～4 5、6 7、8、12 9 10 11、13 14 15 16、17 19、20 18、21～28、30 29 ※ PTY Code 31 （EMERGENCY） is included by all the PTY groups. ※ All the PTY GROUP NAME are capital letter.
User Manual.doc ５-３-９． Function Operation of button Switch to PS / RT Display RADIO PS（Program Service Name） and Switch to RT（Radio Text） Display Touch the TEXT key for less than 0.5sec. If PS/RT exists, it will switch to display next like following when you touch the TEXT key for less than 0.5sec. Initial setting is displaying PS. Display PS Detail → Display RT Display frequency → → Display PS It will display maximum 8 characters of PS. It will display maximum 64 characters of RT.
User Manual.doc ５-４． Operation of Satellite Radio(XM) ５-４-１． Function Operation of button Call /switch to XM mode Call /Switch to XM mode Touch SAT key If you touch the SAT key when it is in other source mode, it will start to receive the channel signal of last band and last memory of XM. It is effective when POWER OFF. The XM band will switch to next like the following when you touch SAT key in XM mode.。 Detail XM1 ※ → XM2 → XM3 → XM1 The display will be "SAT" but not "XM".
User Manual.doc ５-４-２． Function Operation of button CH UP / DOWN SAT CHANNEL UP/DOWN Turn up/down the TUNE key If you turn right the TUNE key in SAT mode, the receiving channel will be one step up. If you turn left the TUNE key in SAT mode, the receiving channel will be one step down. Detail If you turn right the TUNE key in the last channel, it will go to the first channel. If you turn left the TUNE key in the first channel, it will go to the last channel.
User Manual.doc ５-４-３． Function Operation of button CHANNEL UP/DOWN FOR 10 DIGITS SAT CHANNEL UP/DOWN FOR 10 DIGITS Touch the >> / << key for more than 0.5sec (the function only works while touching) If you touch the >> key for more than 0.5sec in SAT mode, the receiving channel will be up for 10 digits a second. If you touch the << key for more than 0.5sec in SAT mode, the receiving channel will be down for 10 digits a second. If you touch the >> key in the last channel, it will go to the first channel.
User Manual.doc ５-４-４． Function Category Search Mode SAT Category Search Mode (Category up/down) Touch PTY/CAT key (Category Search Mode ON) Operation of button Touch UP & DOWN key (Category up/down) Turn up/down the TUNE key (CHANNEL UP/DOWN) ■Category Search Mode If you touch the "PTY/CAT" key in SAT mode, it will go to Category Search Mode and display the name of the category which is receiving for 10 seconds. CAT indicator light will be on in Category Search Mode.
User Manual.doc ５-４-５． Function Operation of button Call Preset Call SAT Preset Channel Touch the"1"～"6" key for less than 1.5sec If you touch "1"～"6" in SAT mode for less than 1.5sec, it will call the channel which is kept as the memory of each key. If you call the channel, it will display the number of preset and receiving channel for 3 seconds, and then go to the last display mode. If the preset channel is being received/has been received, it will not work when you touch the same key.
User Manual.doc ５-４-６． Function Operation of button Write Preset SAT Preset Channel Memory Touch the"1"～"6" key for more than 1.5sec If you touch "1"～"6" in SAT mode more than 1.5 sec, the receiving channel will be kept as the memory of the key you touch. If the memory is confirmed, the preset channel number which is displaying will blink for once. If the memory is confirmed, it will output the "BEEP" sound.
User Manual.doc ５-４-７． Function Operation of button SCAN SAT SAT Channel SCAN Touch the "SCAN" key If you touch "SCAN" key in SAT mode, it will start to scan. It will scan from the next channel for 5 seconds for each when you start it. If it finishes scaning the last channel, it will go on to scan from the first channel. It will scan the channels which are possible for once, and stop at the beginning channel. It will not scan the beginning channel (the ending channel).
User Manual.doc ５-４-８． Function Operation of button Switch the Title Switch the XM title Touch the "TEXT" key If you touch the "TEXT" key, the title will display like following. Default setting is displaying the channel number. 「CH 「CH → → NUMBER」 NAME」 Detail 「TITLE」 → 「NAME」 → 「CATEGORY」 → 「CH NUMBER」 When you switch the title, it will display [CH NUMBER], [CH NAME], [TITLE], [NAME] and [CATEGORY] 3seconds for each, and then display the title. 10 characters information will be supported.
User Manual.doc ５-４-９． Function Operation of button Detail Display RADIO ID Display XM RADIO ID If you select CH000, it will display RADIO ID. It will display "RADIO ID" for 2 seconds and then display ID for 10 seconds and repeat. If Category Search Mode is ON when it is displaying RADIO ID, the category name will be "----" and blink. If error occurs when it is displaying RADIO ID, it will go on displaying RADIO ID but not advisory message, even if the advisory message should be displayed for the error.
User Manual.doc ５-４-１０． Advisory Message List # Error Contents 1 2 Antenna cable is removed from the set. User password has been changed and cannot receive new code by XM signal. (The channel mapping has been changed.) Signal is not enough strong to be received for decoding. It is not effective when it is receiving signal or decoding. (when initial power up.) It is not effective when it is receiving signal or decoding. (When switch channel.) If you select a channel after broadcast ends.
User Manual.doc ５-５． ５-５-１． Function Operation of button Operation of Satellite Radio （Sirius） Call/Switch SR Mode Call and switch the sirius Mode Touch the "SAT" key If you touch the "SAT" key when it is in other source mode, it will start to receive the channel signal of last band and last memory of SR. It is effective when POWER OFF. The SR band will switch to next like the following when you touch "SAT" key in SR mode. Detail SR1 → SR2 → SR3 → SR1 ※The display will be "SAT" but not "SR".
User Manual.doc ５-５-２． ・ CH UP / DOWN The same specification as XM.
User Manual.doc ５-５-３． ・ CHANNEL UP/DOWN FOR 10 DIGITS The same specification as XM.
User Manual.doc ５-５-４． ・ Category Search Mode The same specification as XM.
User Manual.doc ５-５-５． ・ Call Preset The same specification as XM.
User Manual.doc ５-５-６． ・ ・ Write Preset The same specification as XM. But there are some differences as following. Changed Point Detail CH000 and CH255 (RADIO ID) cannot be presetted.
User Manual.doc ５-５-７． ・ SCAN The same specification as XM.
User Manual.doc ５-５-８． Function Operation of button Switch the Title Switch Sirius title Touch the "TEXT" key for less than 0.5sec. If you touch the "TEXT" key, the title will display like following. Initial setting is displaying the channel number. 「CH 「CH → → NUMBER」 NAME」 Detail 「TITLE」 → 「NAME」 → 「CATEGORY」 → 「CH NUMBER」 When you switch the title, it will display [CH NUMBER],[CH NAME],[TITLE],[NAME] and [CATEGORY] 3seconds for each, and then display the title.
User Manual.doc ５-５-９． Function Operation of button Detail Display RADIO ID Display RADIO ID If you choose CH000, it will display RADIO ID. If you choose CH000, it will go to CH255 and display "RADIO ID" for 2 seconds, the upper 8 digits of ID for 5 seconds, and the lower 4 digits of ID for 5 seconds, and repeat. (depend on Sirius-BB) For the problem of communication with Sirius-BB, the title data of CH255 will be kept as RADIO ID.
User Manual.doc ５-５-１０． Error Contents （formal display） # 1 2 3 4 5 6 7 Advisory Message List ANTENNA ERROR （ANTENNA） Updating signed channel （UPDATING） Updating channel map （UPDATING） Requesting for channel/music information （ACQUIRING） Signal is not enough strong to receive （ACQUIRING） Choose unsigned channe （CALL 888-539-SIRI） Choose unused channel （INVALID CH） ※ Display Contents ANTENNA UPDATING UPDATING LOADING LOADING CH - - OFF AIR This specification is equivalent to XM's.
User Manual.doc ５-６． ５-６-１． Media HUB Operation Call /Switch Media HUB Mode Function Call /Switch Media HUB Mode Operation of button Touch the "SAT" key. If you touch the "SAT" key when it is in other source mode, it will start to receive the channel signal of last band and last memory of XM/MEDIA. If you touch the "SAT" key in Media HUB mode, it will switch to next like following.。 XM1/SR1 Detail → XM2/SR2 → XM3/SR3 → MEDIA1 → MEDIA2 → XM1 ※When XM/SR1-3 is chosen, it will display SAT1-3.
User Manual.doc ５-６-２． Function Operation of button Track UP/DOWN Track UP/DOWN Turn the TUNE key If you turn right the TUNE key in Media HUB Mode, it will track up. Detail If you turn left the TUNE key in Media HUB Mode, it will track down. It will display 001 as CH Number normally.
User Manual.doc ５-６-３． Function Operation of button FF/FB FF/REW Touch the >> / << key for more than 0.5sec. （Operate only when touching.） It will wind forward from the playing track if you touch the >> key for more than 0.5sec in Media HUBMode. Detail It will fast backward from the playing track if you touch the << key for more than 0.5sec in Media HUBMode. FF/FB will be released by following Operation. When you turn ACC / POWER OF. When you release the key.
User Manual.doc ５-６-４． Function Operation of button Browsing Mode Browsing Mode (Presetting Button) Touch the PTY / CAT key. （CategorySearch Mode ON） Touch the UP and DOWN key. （Category UP/DOWN） ■Browsing Mode If you touch the PTY / CAT key in MediaHub Mode, it will go to Browsing Mode, and display the Browsing Mode name for selected P.ch for 5sec. CAT indicator will be ON in Browsing Mode. ■List UP/DOWN If you touch the UP key in Browsing Mode, the list for selected P.ch will be up.
User Manual.doc ５-６-５． Function Operation of button Select Operation Mode Select Operation Mode Touch the 1 ～ 6 key. If you touch the 1 ～ 6 key in MediaHub Mode, it will display the Operation Mode for the key. (It will do the same action no matter long touch or not.
User Manual.doc ５-６-６． Function Operation of button Switch to TITLE Switch to TITLE Touch the TEXT key If you touch the TEXT key each time in MediaHub Mode, it will switch to next title like following. Initial setting is displaying “CH NUMBER”. If you switch to next title, it will display 「CH NUMBER」/「CH NAME」/「TITLE」/「NAME」/「CATEGORY」 for 3sec, then display the title. 「CH 「CH → → NUMBER」 NAME」 「TITLE」 → 「NAME」 → 「CATEGORY」 → 「CH NUMBER」 ※4 “CH001” fixed In 3 seconds.
User Manual.doc ５-７． ５-７-１． Function Operation of button Detail Operation of DISC CD LOADING CD Loading Insert CD Disc It will start CD LOADING, if you insert a CD disk when there is no CD in it. It will display “CD LOADING” while CD loading. It will display P-TIME and start to play from the first track. It is also effective when POWER is OFF. It is not effective when ACC is OFF basically. （It may be available right after BACKUP EJECT, and so on.
User Manual.doc ５-７-２． Function Operation of button EJECT CD EJECT CD Touch the EJECT key If you touch the EJECT key when there is a CD in, it will eject the CD. Detail It will keep CD Mode even if it ejects the CD in CD Mode. It will keep the current mode when it eject the CD in other mode except CD Mode. It will go on ejecting even if ACC/POWER is turned off while ejecting. It will go on ejecting even if it goes to other mode while ejecting.
User Manual.doc ５-７-３． Function Operation of button Playback Object ( CD / USB ) The Following Data is Able to be Playbacked －－－ Maximum number of folders/files Maximum number of folders 512 Maximum number of files in a folder 255 Maximum number of files 130560 Maximum number of folders 255 CD Maximum number of files in a folder 255 Maximum number of files 510 ※ Maximum 8- layer (include ROOT) Folder is available.
User Manual.doc Playback Object Files ( CD / USB ) Based on Layer3 of MPEG 1, 2 & 2.5 Sampling Rate (kHz)：48,44.1,32,24,22.05,16,12,11.025,8 MP3 Bit Rate (kbps)：8～320 Variable Bit Rate Supported ID3 Tag (ver1.x,ver2.x) Based on Windows Media Audio9 WMA Bit Rate (kbps)：32～192 Unable to Playback DRM Protected Files MPEG4 AAC（Based on ISO/IEC 14496-12：2003 + iTune Meta-data Specification） AAC Sampling Rate (kHz)：48,44.1,32,24,22.05,16,12,11.
User Manual.doc ５-７-４． Function Operation of button Switch to CD Mode Switch to CD Mode Touch the CD / AUX key It will go to CD Mode if you touch the CD / AUX key in other mode except CD Mode. It will also go to CD Mode when disk roading. It is also effective when POWER is OFF. It will switch to next mode like following if you touch the CD / AUX key in CD Mode. Detail CD → USB(iPod) → BT Audio → AUX → ※ MediaHub Mode is able to be selected by touching the MediaHub → SAT CD key.
User Manual.doc ５-７-５． Function Operation of button Playback / Pause (CD / USB) Playback / Pause the Music Steering Controller Operation Only Refer to Steering Controller Operation Specification It will be paused if you touch to pause while playing music. It will fade out and become mute, then pause. It will display MUTE when pauses. It will fade in when returns to play mode from pause mode. It will fade in from where it paused.
User Manual.doc ５-７-６． Function Operation of button TRACK UP / DOWN CD の TRACK UP/DOWN Turn the TUNE key It will go to next track if you turn right the TUNE key in CD Mode. It will play from the beginning of current track if you turn left the TUNE key in CD Mode. It will go to previous track if you turn TUNE the key in 1sec after operation for changing track. The operation of TRACK UP/DOWN is not effective while DISC LOADING or READING.
User Manual.doc ５-７-７． Function Operation of button FOLDER UP / DOWN （DISC MP3/WMA/AAC） CD の FOLDER UP/DOWN （DISC MP3/WMA/AAC） Touch the UP or DOWN key. The Operation of the UP or DOWN key of Steering Controller. It will go to the next folder of current folder, if you touch the UP key in CD（DISC MP3/WMA/AAC） Mode. It will go to the previours folder of current folder, if you touch the DOWN key in CD（DISC MP3/WMA/AAC） Mode.
User Manual.doc ５-７-８． Function Operation of button FF / FB CD FF/FB Touch the >> or << key for more than 0.5sec （Action only when touching） It will play fast foreward if you touch the >> key for more than 0.5sec in CD Mode. It will play fast backward if you touch the << key for more than 0.5sec in CD Mode. BEEP occurs when you touch the >> or << key for more than 0.5sec. It will display P-TIME when playing fast FF/FB.
User Manual.doc ５-７-９． Function Operation of button RPT Repeat Mode of CD Touch the RPT / RDM key for less than 0.5sec. ■ When playing CD-DA Repeat Mode will switch to next like following, if you touch the RPT / RDM key for less than 0.5sec. REPEAT OFF → TRACK REPEAT → REPEAT OFF ■ When playing DISCMP3/WMA/AAC Repeat Mode will switch to next like following, if you touch the RPT / RDM key for less than 0.5sec. REPEAT OFF Detail → TRACK REPEAT → FOLDER REPEAT → REPEAT OFF Initial Mode is OFF.
User Manual.doc ５-７-１０． Function Operation of button RDM CD RDM Mode Touch the RPT / RDM key for more than 0.5sec. ■ When playing CD-DA It will switch to next mode like the following if you touch the RPT / RDM key for more than 0.5sec. RANDOM OFF → ALL RANDOM → RANDOM OFF ■ When playing DISC MP3/WMA/AAC It will switch to next mode like the following if you touch the RPT / RDM key for more than 0.5sec. RANDOM OFF Detail → FOLDER RANDOM → ALL RANDOM → RANDOM OFF Initial setting is OFF.
User Manual.
User Manual.
User Manual.
User Manual.
User Manual.
User Manual.doc ５-７-１１-６． ALL RDM（DISC MP3/WMA/AAC） RDM Mode Operation Playback normally in RDM Mode # 1 2 ALL RDM TRACK UP 1 TRACK DOWN 1 FOLDER UP 1 FOLDER DOWN 1 FF 1 FB 1 Item/State Specification Plackback the track extracted from all the tracks in media by RDM ※ It will not play the same track continued, but may play RDM extraction Method again when the next ends because it does not caculate all the folders in media, just extracts the next track each time in a simple way.
User Manual.doc ５-７-１２． Function Operation of button SCAN CD Scan Mode Touch the SCAN key （Action when Key is ON） ■ When playing CD-DA It will switch to next scan mode like following if you touch the SCAN key each time. It will play each track in the disk for 10sec in scan mode. It will go to the first track and keep the scan mode when it finishes playing the last track in the disk in scan mode.
User Manual.doc ５-７-１２-１． DISC SCAN （CD-DA） SCAN Mode Operation # Item/State Specification 1 SCAN Playback normally 2 When finishes playing for 10sec. in Scan Mode 3 DISC SCAN When returns to the track when SCAN begins TRACK UP 1 Track UP TRACK DOWN 1 Track DOWN FF 1 Play FF FB 1 Play FB Playback each track for 10sec from the next track. Go to the first track of the DISC if current track is the last. Playback the next track for 10sec.
User Manual.doc ５-７-１２-２． FOLDER SCAN （DISC MP3/WMA/AAC） SCAN Mode Operation # Item/State Specification 1 SCAN Playback normally 2 When finishes playing for 10sec. in Scan Mode 3 FOLDER SCAN When returns to the track when SCAN begins TRACK UP 1 Track UP TRACK DOWN 1 Track DOWN FOLDER UP 1 Folder UP FOLDER DOWN 1 Folder DOWN FF 1 Play FF FB 1 Play FB Playback each track for 10sec from the next track. Go to the first track of the FOLDER if current track is the last.
User Manual.doc ５-７-１３． Function Operation of button Switch to TITLE （CD/USB） Switch to TITLE （CD/USB） Touch the TEXT key for less than 0.5 It will switch to next title mode like following if you touch the TEXT key for less than 0.5sec in CD Mode. Initial setting is displaying P-TIME. It will go to display the last mode when connects next time even when ACC（POWER） OFF/ON, NO DISC/NO DEVICE. It will display the mode name for 3sec then display the title if you switch to Displaying TITLE Mode.
User Manual.doc ５-７-１４． Send PAGE （CD/USB） Function Operation of button Send CD / USB TITLE Displaying PAGE （2-line display） Touch the TEXT key for more than 0.5sec There are 2 display modes. One displays the lower line only (1-line Display Mode), the other displays both upper and Lower lines (2-line Display Mode). Initial mode is 1-line Display Mode. ・ 1-line Display Mode It displays Mode name, DISC number, FOLDER number, TRACK number and CHANNEL number on the Upper line of screen.
User Manual.doc ５-７-１５． Display ERROR Message (CD Mode) Display ERROR Message Function Operation of button It is available to switch modes or adjust AUDIO even when error occurs. The displaying of ERROR Message will be released when switch modes. It will not display ERROR Message even if error occurs when ejecting in other mode except CD Mode. Displaying Priority will be the following: 「Mechanism ERROR > Forcus ERROR > DISC ERROR > Format ERROR」. ・ Mechanism ERROR When Mechanism ERROR occurs in CD.
User Manual.doc ５-８． Operation of USB ５-８-１． USB CONNECT Function Operation of button Connect to USB Media (1 USB Drive) Connect to USB Media with USB Concave shape A Connector. It will not switch to USB Mode automatically even if it connects to USB Media. ・ In USB Mode It will display [NO DEVICE] if it connects to nothing with USB connector. It will display [USB READING] until it gets ready to play the device that connected.
User Manual.doc ５-８-２． Function Operation of butto n USB DISCONNECT Disconnect USB Device Disconnect USB Connector by hand It will keep USB Mode when you disconnect USB device in USB Mode. It will keep current Mode when you disconnect USB device in other mode except USB Mode. It will start USB Mode when you turn POWER ON next time if you disconnect the device when POWER is OFF. It will work like following if you replace the connected device when POWER(ACC) is OFF.
User Manual.doc ５-８-３． Playback Object (CD/USB) Refer to Playback Object (CD/USB).
User Manual.doc ５-８-４． Function Operation of button Switch to USB Mode Switch to USB Mode Touch CD / AUX key （Action when Key is ON.） Touch the CD / AUX key to switch to USB Mode when in other source mode. It is effective when POWER is OFF. Detail It will switch to next source mode like following if you touch the CD / AUX key in USB Mode. CD → USB(iPod) → BT Audio → AUX → MediaHub → CD → ・・・・ It will play resume if you switch to USB Mode when it is connected to Memory or iPod.
User Manual.doc ５-８-５． Play / Pause (CD / USB) Please refer to CD Mode for it includes the operation.
User Manual.doc ５-８-６． ・ TRACK UP / DOWN （MSC） It is the same to CD（DISC MP3/WMA/AAC When playing）.
User Manual.doc ５-８-７． ・ FOLDER UP / DOWN （MSC） It is the same to CD（DISC MP3/WMA/AAC When playing）.
User Manual.doc ５-８-８． Function Operation of button TRACK UP / DOWN （iPod） Index UP/DOWN ※It display trck index in iPod. Turn the TUNE key It will go to the next index if you turn right the TUNE key in iPod Mode. It will go to the beginning of the playing ndex if you turn left the TUNE key in iPod Mode. Detail It will go to the previours index if you turn left the TUNE key when it plays the index for less than 1sec.
User Manual.doc ５-８-９． Function CHAPTER UP / DOWN （iPod） CHAPTER UP/DOWN Turn the TUNE key Operation of button It is possible to operate in Podcasts or Audio Books. (There is ST with or without chapter for different content ) It will track up if you chapter up when it is the last chapter. It will track down if you chapter down when it is the first chapter. It will go to the next chapter if you turn right the TUNE key in a file with chapters in iPod mode.
User Manual.doc ５-８-１０． ・ FF / FB （MSC） It is the same to Operation Specification of CD（DISC MP3/WMA/AAC When playing）.
User Manual.doc ５-８-１１． ・ FF / FB （iPod） Track is discripted as Index in iPod. Playing FF/FB of iPod Function Sound comes out when playing FF/FB. （Sound comes out or not depending on the condition of iPod.） Operation of Touch the >> or << key for more than 0.5sec. （Action only while touching.） butto n It will play FF if you touch the >> key fot more than 0.5sec in iPod Mode. It will play FB if you touch the << key fot more than 0.5sec in iPod Mode. Detail BEEP sounds when confirms the key operation.
User Manual.doc ５-８-１２． Function Operation of button RPT （MSC） RPT Mode of MSC Touch the RPT / RDM key for less than 0.5sec. It will switch to next RPT mode like following if you touch the RPT / RDM key for less than 0.5sec each time. REPEAT OFF Detail → TRACK REPEAT → FOLDER REPEAT → REPEAT OFF Initial setting is OFF. It will display the RPTmode name for 3sec, then trturns to the last display (such as ARTIST NAME, P-TIME) when you switch to RPT Mode. RPT indicator will be on in RPT Mode.
User Manual.doc ５-８-１３． Function Operation of button RDM （MSC） RDM Mode of MSC Touch the RPT / RDM key for more than 0.5sec. It will switch to next RDM mode like following if you touch the RPT / RDM key for more than 0.5sec each time. RANDOM OFF → FOLDER RANDOM → ALL RANDOM → RANDOM OFF Initial setting is OFF. BEEP sounds when you switch to RDM Mode. It will display the RDM mode name for 3sec, then trturns to the last display when you switch to RDM Mode.
User Manual.doc ５-８-１４． ５-８-１４-１． ・ RPT/RDM Playlist of Track Transition TRACK RPT （MSC） Omitted for the same Operation Specification to TRACK RPT （DISC MP3/WMA/AAC）.
User Manual.doc ５-８-１４-２． ・ FOLDER RPT （MSC） Omitted for the same Operation Specification to FOLDER RPT （DISC MP3/WMA/AAC）.
User Manual.doc ５-８-１４-３． ・ FOLDER RDM（MSC） Omitted for the same Operation Specification to FOLDER RDM （DISC MP3/WMA/AAC）.
User Manual.doc ５-８-１４-４． ・ ALL RDM（MSC） Omitted for the same Operation Specification to ALL RDM（DISC MP3/WMA/AAC）.
User Manual.doc ５-８-１５． Function Operation of button SCAN SCAN Mode of USB（MSC Only） Touch the SCAN key. It will switch to next SCAN mode like following if you touch the SCAN key each time. It will start to play all the tracks in the folder for 10sec each from the next track if you switch to FOLDER SCAN Mode. It will go to the first track and go on scaning when it is the end of the last track in the folder in FOLDER SCAN Mode. SCAN OFF → FOLDER SCAN → SCAN OFF Initial setting is OFF.
User Manual.doc ５-８-１６． Function Operation of button RPT （iPod） RPT Mode of iPod Initial setting may be different depending on the RPT setting of iPod when connecting. It is available to set RPT and Shuffle together depending on the Specification of iPod. □ Touch the RPT / RDM key for less than 0.5sec. It will switch to next RPT Mode like following if you touch the RPT / RDM key for less than 0.5sec. ALL REPEAT Detail ⇔ SONG REPEAT Initial setting is ALL REPEAT.
User Manual.doc ５-８-１７． Shuffle （iPod） Shuffle Mode of iPod It will display “RANDOM” or “RDM”instead of “Shuffle” for there are too many character. ShuffleFunction is carried on by iPod. Function Operation of button It is available to set RPT and SHUFFLE together depending on Specification of iPod. It will act like following depending on Specification of iPod. SONG Shuffle ： Reorder the playing order in selected DB by random.
User Manual.doc ５-８-１８． RPT/Shuffle Playlist of Track Transition ５-８-１８-１． SONG RPT （iPod） ※ The following is the reference only for the action is controlled by iPod. There may be different actions for different iPod model or F/M Specification. ※ACTION FOR REFERENCE※ RPT Mode Operation Play normally RPT Mode # Item/State Track up when it is the last track in the DB Track DOWN 1 （Has played for more than 1sec） Track DOWN （Has played for less than 1 sec） Go to the beginning of current index.
User Manual.doc ５-８-１８-２． ALL RPT （iPod） ※ The following is the reference only for the action is controlled by iPod.
User Manual.doc ５-８-１８-３． ALBUM Shuffle （iPod） ※ The following is the reference only for the action is controlled by iPod. There may be different actions for different iPod model or F/M Specification.
User Manual.doc ５-８-１８-４． SONG Shuffle（iPod） ※ The following is the reference only for the action is controlled by iPod. There may be different actions for different iPod model or F/M Specification.
User Manual.doc ５-８-１９． Select Category （iPod） 1/2 Function Operation of button Select Category of iPod Only Audio Category is able to be selected. The iIPod may go to Stop Mode. It will display iPod MENU when it goes to Stop Mode. Touch the LIST / BACK for less than 1.5sec ： Call iPod MENU （iPod MENU Released） Touch the LIST / BACK for less than 1.5sec ： List Back（iPod MENU Displaying） Touch the LIST / BACK for more than 1.
User Manual.doc 2/2 It will act like following when you do operations in iPod MENU. Please refer to each chapter for detail operation of effective keys.
User Manual.
User Manual.doc ５-８-２１． ・ Send PAGE Omitted for the same.
User Manual.doc ５-８-２２． Display ERROR (USB) （1/2） Function Operation of button Display ERROR in USB Mode It is able to switch other mode or adjust AUDIO when ERROR occurs. It will nothing when ERROR occurs in other mode except USB Mode.（Display ERROR only in USB Mode） ■ Bus Error It occurs when more than 1.5A overcurrent caused by USB 5V Bass shorts. It displays [CHECK DEVICE]. It will return by turning ACC OFF/ON.
User Manual.doc （2/2） ■ Digital Rights Management （DRM） It will not come out sound if the DRM of WMA of the playing file is ON. It will take 3sec to detect DRM, and keep the state for 5sec then goes to the next file. （It will display P-TIME as “--：--“ and blink） The file which it would go to when finishes playing current filae normally, or the next file decided by trick play will be the next file. It will go to the next file in TRACK RPT Mode. It is not available to pause when playing DRM file.
User Manual.doc ５-９． ・ Operation of Bluetooth Audio It is unable to control completely by the set. Each state of operation depends on specification of connecting device. ５-９-１． ・ ・ Play / Pause It is the same specification to CD（DISC MP3/WMA/AAC / AAC When playing）.（No operation for DISC rotation or stop.） It is unable to control completely by the set. Each state of operation depends on specification of connecting device.
User Manual.doc ５-９-２． ・ ・ ・ ・ ・ TRACK UP / DOWN It is the same specification to CD（DISC MP3/WMA/AAC / AAC When playing） However, it does not support continued operation of TRACK UP/DOWN. It is unable to control completely by the set. Each state of operation depends on specification of connecting device. The action that tracks down when it is the first track depends on specification of connecting device. The action that tracks up when it is the last track depends on specification of connecting device.
User Manual.doc ５-９-３． ・ ・ ・ ・ ・ ・ FOLDER UP / DOWN It is the same specification to CD（DISC MP3/WMA/AAC / AAC When playing） It is unable to control completely by the set. Each state of operation depends on specification of connecting device. The strvcture of FOLDER depends on connecting Mobile Phone. However, it does not support continued operation of FOLDER UP/DOWN. The action that folder down when it is the first track depends on specification of connecting device.
User Manual.doc ５-９-４． Function Operation of button RPT RPT Mode of Bluetooth Audio Touch the RPT / RDM key for less than 0.5sec It will switch to next RPT Mode like following if you touch the RPT / RDM key for less than 0.5sec. REPEAT OFF Detail → ALL REPEAT → FOLDER REPEAT → TRACK REPEAT → REPEAT OFF It is unable to control completely by the set. Each state of operation depends on specification of connecting device. Initial state depends on the connecting device.
User Manual.doc ５-９-５． Function Operation of button RDM RDM Mode of Bluetooth Audio Touch the RPT / RDM key for more than 0.5sec. It will switch to next mode like following if touch the RPT / RDM key for more than 0.5sec. RANDOM OFF Detail → ALL RANDOM → FOLDER RANDOM → RANDOM OFF It is unable to control completely by the set. Each state of operation depends on specification of connecting device. Initial state depends on the connecting device. BEEP sounds when switch to RDM Mode.
User Manual.doc ５-９-６． ・ RPT/RDM Playlist of Track Transition The Specification of playlist of track transition of ALL REPEAT, TRACK REPEAT, FOLDER REPEAT, ALL RANDOM, FOLDER RANDUM is the same to 6-9-11.RPT/RDM. However, the state after operation depends on the specification connecting device.
User Manual.doc ５-９-７． Function Operation of button Switch to TITLE Switch to Title of Bluetooth Audio Touch the TEXT key for less than 0.5sec It will switch to display title if you touch the TEXT key for less than 0.5sec in Bluetooth Audio. Initial setting is diplaying P-TIME. (Depends on the connecting device) It displays that notified from Mobile Phone. The state after operation depends on the specification connecting device.
User Manual.doc ５-９-８． ・ Send PAGE It is the same specification with（CD/USB）.
User Manual.doc ５-１０． ５-１０-１． Function Operation of button Operation of Bluetooth HFP VOICE COMMAND It is the function to call Menu, Phonebooks or set the setting by Voice Command. Touch the TALK key and say effective Voice Commands. It is able to call menu or make a call by VOICE COMMAND. Touch the TALK key and say the Voice Command when it becomes effective. Detail It will display “LISTENING” when you say a Voice Command. (It will end the Mode in 5sec after it cannot recognize theCommand.
User Manual.doc ５-１０-２． No.
User Manual.
User Manual.doc ５-１０-３． BT TOP MENU （1/2） Function Call, Registrate and Set BT TOP MENU. Call BT TOP MENU in other mode except BT Mode by touching following keys. KEY OPERATION ： Call BT TOP MENU by touching the OFF HOOK key, Select each item by turning the TUNE key and decide by touching it. VOICE COMMAND ： Say the voice commands to call each item in BT TOP MENU directly after touch the TALK ※ Operation of button key. Following Items are effective.
User Manual.doc When Item REDIAL is selected. Dial Store Delete Previous Go Back HELP ： ： ： ： ： ： Call the number selected Registrate the number to phonebooksand go to the menu Delete the selected number from history and go to the menu Go back to display the previours newest number Go back to display the second newest number Call HELPCommand When Item CALL BACK is selected.
User Manual.doc （2/2） BT TOP MENU PHONEBOOK ： The menu to operate about phonebook ADD ENTRY ： The function to registrate numbers to phonebook BY VOICE ： registrate by VOICE COMMAND BY PHONE ： registrate by Mobile phone MANUAL INPUT ： registrate by inputing numbers CALL HISTRY ： registrate from incoming history LIST NAMES ： The function to Read the Voice Tag in phonebook, It is possible for outgoing a call CHANGE NAMES ： The function to change registrated VOICE TAGS.
User Manual.doc ５-１０-４． Function INITIAL START (PAIRING) It will begin Initial Pairing if you go to BT TOP MENU when there is no regestration on the list. It is the same operation to paring normally. It will display “NOT AVAIL” and released from BT Mode if it begin driving.。 Select the Languages Key Operation ： Select English or French by turning the TUNE and decide by touching the TUNE key. Display “WELCOME!” Key Operation ： Touch the TUNE or TALK key to skip to registration. Regestration 1.
User Manual.doc ５-１０-５． Function DIAL The function to Dial. There are 8 ways to dial basically. DIAL BY NAME ： Outgoing a call by Saying Voice Tag in Voice Recognization Mode. DIAL BY NUMBER ： Outgoing a call by Saying Numbers in Voice Recognization Mode. SPEED DIAL ： Outgoing a call by Touching the Pch KEY which is registrated for SPEED DIAL REDIAL ： Redial from outgoing history. CALL BACK ： Call back fron incoming history. LIST NAMES ： Outgoing a call from phonebook.
User Manual.doc REDIAL 1. Call REDIAL Mode. Key Operation ： Turn the TUNE key and select REDIAL and touch in BT TOP MENU. VOICE COMMAND： Touch the TALK key and say “REDIAL” in BT TOP MENU or other mode except BT Mode. 2. Turn the TUNE key in outgoing history and select the number. 3. Outgoing a call.（The same operation to DIAL BY NAME） （It is possible to call the displaying number by touching the OFF HOOK keywhen displaying outgoing history.) CALL BACK 1. Call CALL BACK Mode.
User Manual.doc ５-１０-６． Function Operation of button Detail Incoming Call The function of taking a call. The following operation is effective when a call incoming. Answer the call ： Answer the call by touching the OFF HOOK key Response Pending ： Short touching the ON HOOK key for Response Pending Refuse the call ： Long touching the ON HOOK key for refusing the call Adjust the incoming volume ： Touch the VOL+ or VOL- key It is able to adjust the incoming volume when incoming a call.
User Manual.doc ５-１０-７． Function Operation of button Detail CALL The Function to Call By Connecting HFP. The followong operation is effective when calling. Switch HF Mode to PRIVATE Mode ： Touch the OFF HOOK key.（It also possible for the opposite action.） Switch Micphone to MUTE ： Touch the TALK key. （It also possible for the opposite action.） End the Call ： Touch the ON HOOK key. It will go to the last source mode when a call ends. Where it will go depends on the way you dial.
User Manual.doc ５-１０-８． Function Registration Phone Book The function to registrate phone numbers, names and some information else to phonebook. Threr are 6 ways like following. BY VOICE ： Registrate phonebook by saying numbers in VOICE COMMAND Mode. BY PHONE ： Registrate phonebook the numbers transferred from phonebook of mobile phone. MANUAL INPUT ： Registrate phonebook by inputing numbers by key or in VOICE COMMAND Mode. CALL HISTORY ： Registrate phonebook from incoming/outgoing history.
User Manual.doc MANUAL INPUT （It will release BT Mode and display NOT AVAIL when you start driving.） 1. Select MANUAL INPUT in ADD ENTRY Menu. Key Operation ： Turn the TUNE key toselect MANUAL INPUT and touch. 2. Input the Numbers （MAX: 24digits） ※ The Rest is the same to 「No.3 VOICE TAG REGISTRATION」. CALL HISTORY 1. CALL HISTORY in ADD ENTRY Menu. Key Operation ： Turn the TUNE key to select CALL HISTRY and touch. VOICE COMMAND ： Touch the TALK key and say “CALL HISTRY”. 2.
User Manual.doc SPEED DIAL（It will release BT Mode and display NOT AVAIL when you start driving.） 1. It will go to registrate SPEED DIAL after VOICE TAG registrated. Key Operation ： Turn the TUNE key to select SPEED DIAL and touch. VOICE COMMAND ： Touch the TALK key and saying “SET SPEED DIAL”. 2. Touch any key from 1 ～ 6 which you you want to registrate. ※ It will display “OVERWRITE?” if the key you touch has been registrated. Detail □ VOICE TAG and SPEED DIAL Registration can be ommitted.
User Manual.doc ５-１０-９． Function PHONEBOOK （Others） There are some other items like following in phonebook. LIST NAMES ： The function to read VOICE TAG. It is able to call. CHANGE NAMES ： The function to change VOICE TAG which has been registrated. SET SPEED DIAL ： The function to registrate SPEED DIAL. DELETE ENTRY ： The function to delete memory from phonebook. DEL SPEED DIAL ： The function to delete SPEED DIAL. LIST NAMES 1. Call LIST NAMES in PHONEBOOK.
User Manual.doc CHANGE NAME 1. Call CHANGE NAME in PHONEBOOK. Key Operation ： Turn the TUNE key to select CHANGE NAME and touch. VOICE COMMAND ： Touch the TALK key and say “CHANGE NAME”. 2. Call and change the number/name and Confirm Key Operation ： Turn the TUNE key to select the number and touch. VOICE COMMAND ： Touch the TALK key and say “VOICE TAG”. 3. Confirm the number. （Only for Call VOICE Recogniztion in Item2.） Confirm after displayed the number has been recognized.
User Manual.doc DELETE ENTRY 1. Call DELETE ENTRY in PHONEBOOK. Key Operation ： Turn the TUNE key to select DELETE ENTRY and touch.. VOICE COMMAND ： Touch the TALK key and say “DELETE ENTRY ”. 2. Call the number to delete. Key Operation ： Turn the TUNE key to select the number and touch. VOICE COMMAND ： Touch the TALK key and say “VOICE TAG”. 3. Delete the number. （It will display DELETED and go to PHONE BOOK.） Key Operation ： Turn the TUNE key to select CONFIRM and touch.
User Manual.doc ５-１０-１０． Function BT SETUP （SECURITY） There are following settings in SECURITY. SET PIN ： SET PIN CODE PHBK LOCK ： SET PHBK LOCK ON（No operation about phonebook is availble） PHBK UNLOCK ： SET PHBK LOCK OFF Call SETUP in BT TOP MENU and set up. Key Operation ： Turn the TUNE key to select SETUP and touch. VOICE COMMAND ： Touch the TALK key and say “SETUP”. Set PIN CODE in SECURITY 1. Call SECURITY when setting up. Key Operation ： Turn the TUNE key to select SECURITY and touch..
User Manual.doc Call PHBK LOCK in SECURIT MENU. 1. Call SECURITY MENU when setting. Key Operation ： Turn the TUNE key to select SECURITY and touch. VOICE COMMAND ： Touch the TALK key and say “SECURITY”. 2. Call PHBK LOCK. Key Operation ： Turn the TUNE key to select PHBK LOCK and touch. VOICE COMMAND ： Touch the TALK key and say “PHONE BOOK LOCK”. 3. Input the current PIN Code when it displays CURRENT PIN？. Key Operation ： Turn the TUNE key to select Numbers and touch.
User Manual.doc forpairing is called PASS KEY.） PIN CODE is made up by a 4-digit number. The following operations are limited in BT MENU when it is locked. If you go to the menu which is limited, it will display PHBK LOCK. The following operations are effective in the case. Key Operation ： Turn the TUNE key to select PHBK UNLOCK and touch. ○HARD KEY KEYS EFFECT After going to REDIAL Menu, displays PHBK LOCK Go to the last source mode.
User Manual.doc ５-１０-１１． Function BT SETUP （PHONE SETUP） There are setting items like following in PHONE SETUP MENU. PAIR PHONE ： Paring SELECT PHONE ： Select a mobile phone from registration list to connect to. CHANGE NAME ： Registrate/Change VOICE TAG of the phones on registration list. LIST PHONES ： Read the VOICE TAG of the phones on registration list. SET PASSKEY ： Set PASSKEY for pairing. DELETE ： Delete phones/a phone from registration list.
User Manual.doc CHANGE NAME 1. Call CHANGE NAME in PHONE SETUP MENU. Key Operation ： Touch the TUNE key to select CHANGE NAME and touch. VOICE COMMAND ： Touch the TALK key and say “CHANGE NAME ”. 2. 3. ※ If there is no phone on registration list, it will display “EMPTY” and go to PHONE SETUP MENU. Select the phone to change name from the list like SELECT PHONE. Registrate VOICE TAG again. Key Operation ： Touch the TUNE key to select RECORD NAME and touch or touch the TALK key to 4. speak.
User Manual.doc SET PASSKEY 1. Call SET PASSKEY in PHONE SETUP MENU. Key Operation ： Touch the TUNE key to select SET PASSKEY and touch. VOICE COMMAND ： Touch the TALK key and say “SET PASSKEY ”. 2. Input the new PASSKEY after displaying current PASSKEY. Key Operation ： Touch the TUNE key to select a number and touch to decide. VOICE COMMAND ： Touch the TALK key and say “PASSKEY NUMBER”. 3. Confirm the PASSKEY. It will go to PHONE SETUP MENU after displaying the new PASS KEY.
User Manual.doc ５-１０-１２． Function BT SETUP （SYSTEM SETUP） There are following setting items in SYSTEM SETUP MENU. GUIDANCE VOL ： Adjust GUAIDANCE VOLUME INITIALIZE ： Initilize Information of Registrated Device SEL LANGUAGE ： Select Language GUIDANCE VOL 1. Call GUIDANCE VOL in SYSTEM SETUP MENU. Key Operation ： Touch the TUNE key to select GUIDANCE VOL and touch. 2. Turn the TUNE key and adjust GUIDANCE VOL（1～7）. It will go to SYSTEM SETUP MENU when timeout or you touch the TUNE key. INITIALIZE 1.
User Manual.doc ５-１０-１３． Function DELETE HISTORY Delete the history of REDIAL/CALLBACK. REDIAL 1. Call REDIAL in BT TOP MENU. Key Operation ： Touch the TUNE key to select REDIAL and touch. VOICE COMMAND ： Touch the TALK key and say “REDIAL”. 2. Select the number/ name to delete. Key Operation ： Touch the TUNE key to select registration number/name and touch to decide. 3. Delete. Key Operation ： Touch the TUNE key to select DELETE and touch. VOICE COMMAND ： Touch the TALK key and say “DELETE”.
User Manual.doc ５-１１． Function Operation of butto n Operation of AUX AUX Input Touch the CD / AUX key. Touch the MODE key of Steering Controller. It will switch to AUX Mode if you touch the CD / AUX key no matter whether connected to an AUX Device or not. （Please refer to “Switch to CD Mode” in CD Chapter.） It will not switch to AUX Mode if you touch the MODE key of Steering Controller when there is no AUX Device Detail connected. It will keep AUX VOLUME Value even if you disconnect the AUX Device.
User Manual.doc ５-１２． ５-１２-１． Function Operation of button OTHERS POWER ON POWER ON/OFF Touch the VOLUME key. POWER will be ON in last mode if you touch the VOLUME key when POWER is OFF. POWER will be OFF if you touch the VOLUME key when POWER is ON. Detail The Display will also be off when POWER is OFF. It will not FADE OUT/IN like touching the MUTE key when POWER is OFF/ON. It will start to receive initial FM1 frequency of RADIO when you turn POWER ON first time.
User Manual.doc ５-１２-２． Function Operation of button Detail BEEP BEEP OCCURING When Operate the Specified Key Refers to Following. BEEP Comes out from the Front Speaker.
User Manual.doc ５-１２-３． TEL MUTE Function Operation of button Detail TEL-MUTE If car-phone is connected to the TEL-MUTE terminal of the set and call rings, it will stop the mode if it is in RADIO/CD/USB/AUX mode. TEL-MUTE Mode will be released by following conditions. When you touch the MODE key of Steering Controller for more than 1.5sec.
User Manual.doc ５-１２-４． Operation of Steering Controller When it is detected that more than 1 key are touched together (When the keys of Steering Controller in low voltage are touched), the first key and the last key you touch will be not effective.
User Manual.doc ５-１２-４-１． Function Operation of button VOLUME UP / DOWN （1step） VOLUME の UP/DOWN Touch the VOLUME + or VOLUME – key for less than 0.5sec. ■ COMMON FOR ALL MODES Adjust VOLUME when Key is ON. VOLUME will be 1step UP if you touch the VOLUMR + key for less than 0.5sec. VOLUME will be 1step DOWN if you touch the VOLUMR - key for less than 0.5sec. It will not be UP when it is the MAX（ 40 ）. It will not be DOWN when it is the MIN（ 0 ）.
User Manual.doc ５-１２-４-２． Function Operation of button VOLUME UP / DOWN （Continued） VOLUME be UP/DOWN Continued Touch the VOLUME + or VOLUME – key for more than 0.5sec. （Action Only When Touching） ■ COMMON FOR ALL MODES VOLUME will be UP/DOWN continued when you touch the VOLUME + or VOLUME – key for more than 0.5sec. Detail VOLUME will be 1 step UP/DOWN in every 150ms when you touching the key for more than 0.5sec. It will stop when it is the MAX/MIN（ 40/0 ）.
User Manual.doc ５-１２-４-３． Function Operation of button UP / DOWN Preset CH UP / DOWN （SEEK UP / DOWN） Touch the UP or DOWN key. ■ RADIO Mode Preset CH will be UP/DOWN if you touch the UP or DOWN key for less than 1.5sec. It will SEEK UP/DOWN if you touch the UP or DOWN key for more than 1.5sec. ■ SAT Mode CH will be UP/DOWN if you touch the UP or DOWN key. （Action when Key is ON） ■ CD / USB / BT Audio Mode Detail TRACK will be UP/DOWN if you touch the UP or DOWN key for less than 1.5sec.
User Manual.doc ５-１２-４-４． Function Operation of button MODE Switch MODES Touch the MODE key for less than 1.5sec. 【 COMMON FOR ALL MODES 】 It will switch to other mode if you touch the key. The Mode order will be different for different Destinations. Detail FM → AM → BT Audio ※ → → SAT ※ AUX ※ → → CD ※ Media-HUB ※ USB ※ → → → FM It will go to the last frequency of the last BAND if you switch to FM/AM Mode. It will go to the last channel of the last BAND if you switch to SAT Mode.
User Manual.doc ５-１２-４-５． Function Operation of button MUTE MUTE ON / OFF Touch the MODE key for more than 1.5sec. It will switch MUTE ON/OFF if you touch the MODE key for more than 1.5sec in each mode. It will display “MUTE” in MUTE Mode. MUTE Mode will be released by following situation. When you turn ACC / POWER OFF. When you go to other source mode. Touch the MODE key more than 1.5sec. Detail When you turn VOLUME UP. When BT-TEL interrupts. The following key is also effective besides above.
User Manual.doc ５-１２-４-６． ON HOOK Function Operation of button End a Call Detail Touch the ON HOOK key. 【 COMMON FOR ALL MODES 】 End HFP function by mobile phone.
User Manual.doc ５-１２-４-７． Function Operation of button Detail OFF HOOK Outgoing a Call Touch the OFF HOOK key. 【 COMMON FOR ALL MODES 】 Outgoing a call from mobile phone.
User Manual.doc ５-１２-４-８． VOICE COMMAND Function Operation of button VOICE COMMAND Touch the TALK key 【 Common For All Models 】 Detail Voice Command will be effective by touching the TALK key.
User Manual.doc ５-１２-５． CONTROL BRIGHTNESS & ILLUMI Function Operation of button Detail The Brightness of LCD backlight can be changed by the operation of illumination. If it receives “BRIGHT ON” signal from ECU, it will set brightness of LCD backlight to Day Brightness (MAX). If it receives “BRIGHT OFF” signal from ECU, it will set brightness of LCD backlight as singnal. It is possible to adjust the brightness in 6 steps.
