Users Manual Part 1

RADIO AND CD/USB PLAYER WITH Bluetooth®
1-17
If “ERROR” Appears in the Display
If a problem occurs with the USB device during playback, an “ERROR” (message) appears in the display
Error
Display
Cause Measure
USB MEMORY DEVICE
DEVICE
ERROR
Failure detection of USB memory device
when it is plugged into the port.
Unplug the USB memory device and
re-plug into the port.
NO FILE No audio le is detected in the media. Replace with audio contents loaded USB
memory device.
OVER
CURRENT
USB connector short circuit/ overloaded. Unplug the USB memory device, turn off
the car stereo power and then turn on the
power again.
NO
RESPONSE
Device no response after 20 sec of le
reading.
Reduce the number of le in the USB
memory device.
USB HUB
ERROR
USB HUB is connected Unplug the USB HUB and plug in USB
memory device into the port.